LHC@home

This version provides the latest vboxwrapper (v26208)

Linux version runs perfect.

On Windows vboxwrapper (v26208) was running fine too.

https://lhcathome.cern.ch/lhcathome/results.php?hostid=10690380&offset=0&show_names=0&state=4&appid=13

I think there is a problem with the new vwoxwrapper on macOS, though. All of the new jobs for Theory and CMS (which just picked up the new wrapper too) are failing when starting:

2025-01-17 08:41:15 (46984): vboxwrapper version 26208
2025-01-17 08:41:15 (46984): BOINC client version: 8.0.2
2025-01-17 08:41:15 (46984): Detected: VirtualBox VboxManage Interface (Version: 7.0.20)
2025-01-17 08:41:15 (46984): Detected: Sandbox Configuration Enabled
2025-01-17 08:41:15 (46984): WARNING: Communication with VM Hypervisor failed.
2025-01-17 08:41:15 (46984): ERROR: VBoxManage list hostinfo failed
2025-01-17 08:41:15 (46984): called boinc_finish(1)


I have one Theory straggler (a 10-day job) which started before the changeover, and it is continuing to run just fine.

After I saw the first batch of failures, I updated VirtualBox to the latest version (7.1.4), but it does the same thing (and it is currently running my old Theory job).
I recently updated my Mac to Sequoia 15.2, but I did that a few days ago, and LHC tasks ran fine after that (until the wrapper change).

Please try the following steps.

1. ensure no VirtualBox component or VM is running
2. ensure VirtualBox daemons VBoxSVC and VBoxXPCOMIPCD are shut down; if not, wait 1 min, then kill them
3. if "/tmp/.vbox-<username>-ipc" directories exist, remove them
4. as <boinc-username> run "mkdir /tmp/.vbox-<boinc-username>-test" to ensure that account is permitted to create a subdirectory in "/tmp"
5. run "ls -ald /tmp/.vbox-*" to check the details (post the output here); then remove the test dir
6. as <boinc-username> run "VBoxManage list hostinfo" (post the output here)
7. did step (6.) create "/tmp/.vbox-<boinc-username>-ipc"
8. remove the manually created "/tmp/.vbox-<boinc-username>-ipc"; then try a fresh CMS task
9. check (within a few seconds after you started the task) if a VBoxSVC is running; then check if a fresh "/tmp/.vbox-<boinc-username>-ipc" has been created

Thanks for the reply. Here are the results:

sh-3.2# ps -ax | egrep Vir
20520 ttys000 0:00.00 egrep Vir
sh-3.2# ps -ax | egrep VB
20523 ttys000 0:00.00 egrep VB
sh-3.2# sudo -u boinc_project sh
sh-3.2$ mkdir /tmp/.vbox-boinc_project-test
sh-3.2$ ls -ald /tmp/.vbox-*
drwxr-xr-x 2 boinc_project wheel 64 Jan 18 17:15 /tmp/.vbox-boinc_project-test
drwx------ 4 jfw wheel 128 Jan 17 23:29 /tmp/.vbox-jfw-ipc
sh-3.2$ VBoxManage list hostinfo
VBoxManage: error: Failed to initialize COM because the global settings directory '/Users/jfw/Library/VirtualBox' is not accessible!
sh-3.2$

I assume that probably is the key to the problem right there. (jfw is my own account)

I went through the other steps, created/removed the .vbox-boinc_project-ipc directory, tried running new tasks, and no VBoxSVC was running, nor was a new directory created.

As to it trying to use the settings from my home directory: using sudo to switch the user ID still left HOME set to /Users/jfw.
I'm not sure whether HOME is set in the environment for processes run from BOINC; and it also turns out that the home directory for the boinc_project (and boinc_master) users is "/var/empty", which is owned by root and also appears to be immutable. (even root cannot create files or directories in it)

I verified that I installed VirtualBox as "Install for all users of this computer".

(Edit)
After reading the sudo man page, I tried "sudo -H -u boinc_project sh" to switch the user ID, and VBoxManage printed
VBoxManage: error: Failed to initialize COM because the global settings directory '/var/empty/Library/VirtualBox' is not accessible!

I compared the vboxwrapper source code between v26207 used by CERN before and v26208 but could not find any obvious change that explains the issue on Apple.

Please check if this page provides a useful hint:
https://github.com/BOINC/boinc/wiki/Tools-for-MacOS

If not, please post a question at the main BOINC forum and/or an issue at the development platform to get attention of more Apple experts:
https://boinc.berkeley.edu/forum_index.php
https://github.com/BOINC/boinc/issues

The biggest change between the vboxwrapper v26207 and v26208 is the location for the virtual machines. This moved from /Library/Application Data/Boinc/Projects/VirtualBox to ~/Library/VirtualBox

Apparently, user boinc_manager is not allowed to access the ~ folder... I think the data should be moved to the /Users/Shared directory instead of the ~ directory.

Thanks.
I just created a bug report on github:
https://github.com/BOINC/boinc/issues/6015

I had tried creating a directory /Users/Shared/boinc_project (owner boinc_project, group boinc_project) and changing the home directory of boinc_project to that directory.
"VBoxManage list hostinfo" worked, but jobs from LHC still failed.

I see from that bug report that apparently these hidden users might be sandboxed (although VBoxManage worked? Maybe using sudo from a "real user" got around that?), and that they are leaning toward just putting the VirtualBox directory somewhere more sensible under /Library/Application\ Support/BOINC\ Data. I guess I will just leave LHC suspended until the next vboxwrapper comes out...

Thanks for your help!

There's a modified vboxwrapper available at github for testing.
Please download the "osx_samples-makefile_apps_*.zip" archive (artifact) from here:
https://github.com/BOINC/boinc/actions/runs/12878161731

then
1. stop BOINC
2. set "<dont_check_file_sizes>1</dont_check_file_sizes>" in the options section of cc_config.xml
3. extract vboxwrapper from the artifact and rename it "vboxwrapper_26208_x86_64-apple-darwin"
4. replace "26208" from LHC@home with the modified one
5. you may need to run "Mac_SA_Secure.sh" as described here:
https://github.com/BOINC/boinc/issues/6015#issuecomment-2603424025
6. start BOINC and run a fresh vbox task from LHC@home
7. report the test results here (and at github if you have an account there: https://github.com/BOINC/boinc/issues/6015)


@John Woods,
@Mastha-Hacker
Would you mind testing it?

I am testing now. Please wait before implementing it on the server..
The tasks are running now.

My tasks:
https://lhcathome.cern.ch/lhcathome/results.php?userid=214884

Tasks after 21 Jan 2025, 18:10:54 UTC are fetched with the new wrapper.

Tasks are not finishing now. I cannot see the VM running.

Tasks are not running yet via Boinc. I am be able to start the VM manual. Currently running a task which I started via Boinc and via CLI.

This task I only started via CLI:
https://lhcathome.cern.ch/lhcathome/result.php?resultid=418984440

@computezrmle,
The newest virtualboxwrapper still contains bugs (v26210).

I can run the task in a normal way with the vboxwrapper v26207b which I took from your server. The tasks are failing. First with startup the VM says "Getting time from pool.ntp.org - Failed". After a while, probing /cvmfs/sft.cern.ch... Failed!

After that, the machine shuts down and gives computation error.

2025-01-22 20:04:30 (924): Guest Log: 00:00:00.000068 main     Log opened 2025-01-22T19:04:36.701079000Z
2025-01-22 20:04:30 (924): Guest Log: 00:00:00.000157 main     OS Product: Linux
2025-01-22 20:04:30 (924): Guest Log: 00:00:00.000197 main     OS Release: 4.14.76-13.cernvm.x86_64
2025-01-22 20:04:30 (924): Guest Log: 00:00:00.000234 main     OS Version: #1 SMP Tue Oct 16 18:26:15 CEST 2018
2025-01-22 20:04:31 (924): Guest Log: 00:00:00.000272 main     Executable: /usr/sbin/VBoxService
2025-01-22 20:04:31 (924): Guest Log: 00:00:00.000273 main     Process ID: 3276
2025-01-22 20:04:31 (924): Guest Log: 00:00:00.000274 main     Package type: LINUX_64BITS_GENERIC
2025-01-22 20:04:31 (924): Guest Log: 00:00:00.002729 main     5.2.6 r120293 started. Verbose level = 0
2025-01-22 20:08:22 (924): Guest Log: 20:08:28 CET +01:00 2025-01-22: cranky: [INFO] Detected Theory App
2025-01-22 20:08:22 (924): Guest Log: 20:08:28 CET +01:00 2025-01-22: cranky: [INFO] Checking CVMFS.
2025-01-22 20:08:22 (924): Guest Log: Probing /cvmfs/sft.cern.ch... Failed!
2025-01-22 20:08:22 (924): Guest Log: 20:08:28 CET +01:00 2025-01-22: cranky: [ERROR] 'cvmfs_config probe sft.cern.ch' failed.

I can run the task in a normal way with the vboxwrapper v26207b

Please link a recent log pointing to a valid task your computer finished with v26207b.

First with startup the VM says "Getting time from pool.ntp.org - Failed". After a while, probing /cvmfs/sft.cern.ch... Failed!

These network connections are initiated from inside the VM.
Since the vdi image hasn't changed (except it's name and vbox UUID) it appears to be a local permissions or sandbox problem.
Are you sure the vbox processes run under the correct BOINC user account and that user is a member of the BOINC group?

Be aware that it doesn't make sense to run the VM image or vboxwrapper using a different (your normal) user account.
Charlie Fenton mentioned the Mac_SA_Secure.sh script at github.
It may be helpful to follow the comments at the beginning of that script.

CMS Task:
https://lhcathome.cern.ch/lhcathome/result.php?resultid=419022990

Theory Task:
https://lhcathome.cern.ch/lhcathome/result.php?resultid=419017121

Both tasks are launched with the 26207b wrapper.
I don't think that the results will be uploaded properly of the Theory task. So here the files:
stderr.txt

2025-01-22 23:05:20 (14397): vboxwrapper version 26207
2025-01-22 23:05:20 (14397): BOINC client version: 8.0.2
2025-01-22 23:05:20 (14397): Detected: VirtualBox VboxManage Interface (Version: 7.1.4)
2025-01-22 23:05:20 (14397): Detected: Sandbox Configuration Enabled
2025-01-22 23:05:20 (14397): Detected: Heartbeat check (file: 'heartbeat' every 1200.000000 seconds)
2025-01-22 23:05:20 (14397): Successfully copied 'init_data.xml' to the shared directory.
2025-01-22 23:05:20 (14397): Successfully copied 'input' to the shared directory.
2025-01-22 23:05:20 (14397): Create VM. (boinc_216789977e56d4fa, slot#4)
2025-01-22 23:05:20 (14397): Setting Memory Size for VM. (630MB)
2025-01-22 23:05:20 (14397): Setting CPU Count for VM. (1)
2025-01-22 23:05:20 (14397): Setting Chipset Options for VM.
2025-01-22 23:05:20 (14397): Setting Graphics Controller Options for VM.
2025-01-22 23:05:20 (14397): Setting Boot Options for VM.
2025-01-22 23:05:20 (14397): Setting Network Configuration for NAT.
2025-01-22 23:05:20 (14397): Enabling VM Network Access.
2025-01-22 23:05:20 (14397): Disabling USB Support for VM.
2025-01-22 23:05:20 (14397): Disabling COM Port Support for VM.
2025-01-22 23:05:20 (14397): Disabling Audio Support for VM.
2025-01-22 23:05:20 (14397): Disabling Clipboard Support for VM.
2025-01-22 23:05:20 (14397): Disabling Drag and Drop Support for VM.
2025-01-22 23:05:20 (14397): Adding storage controller(s) to VM.
2025-01-22 23:05:20 (14397): Adding virtual disk drive to VM. (Theory_2025_01_16_prod.vdi)
2025-01-22 23:05:21 (14397): Adding VirtualBox Guest Additions to VM.
2025-01-22 23:05:21 (14397): Adding network bandwidth throttle group to VM. (Defaulting to 1024GB)
2025-01-22 23:05:21 (14397): forwarding host port 49648 to guest port 80
2025-01-22 23:05:21 (14397): Enabling remote desktop for VM.
2025-01-22 23:05:21 (14397): Required extension pack not installed, remote desktop not enabled.
2025-01-22 23:05:21 (14397): Enabling shared directory for VM.
2025-01-22 23:05:21 (14397): Starting VM using VBoxManage interface. (boinc_216789977e56d4fa, slot#4)
2025-01-22 23:05:23 (14397): Successfully started VM. (PID = '14471')
2025-01-22 23:05:23 (14397): Reporting VM Process ID to BOINC.
2025-01-22 23:05:23 (14397): Guest Log: BIOS: VirtualBox 7.1.4
2025-01-22 23:05:23 (14397): Guest Log: CPUID EDX: 0x178bfbff
2025-01-22 23:05:23 (14397): Guest Log: BIOS: No PCI IDE controller, not probing IDE
2025-01-22 23:05:23 (14397): Guest Log: BIOS: AHCI 0-P#0: PCHS=16383/16/63 LCHS=1024/255/63 0x0000000002800000 sectors
2025-01-22 23:05:23 (14397): VM state change detected. (old = 'poweredoff', new = 'running')
2025-01-22 23:05:23 (14397): Detected: Web Application Enabled (http://localhost:49648)
2025-01-22 23:05:23 (14397): Preference change detected
2025-01-22 23:05:23 (14397): Setting CPU throttle for VM. (100%)
2025-01-22 23:05:23 (14397): Setting checkpoint interval to 600 seconds. (Higher value of (Preference: 60 seconds) or (Vbox_job.xml: 600 seconds))
2025-01-22 23:05:25 (14397): Guest Log: BIOS: Boot : bseqnr=1, bootseq=0032
2025-01-22 23:05:25 (14397): Guest Log: BIOS: Booting from Hard Disk...
2025-01-22 23:05:28 (14397): Guest Log: BIOS: KBD: unsupported int 16h function 03
2025-01-22 23:05:28 (14397): Guest Log: BIOS: AX=0305 BX=0000 CX=0000 DX=0000 
2025-01-22 23:07:20 (14397): Guest Log: vgdrvHeartbeatInit: Setting up heartbeat to trigger every 2000 milliseconds
2025-01-22 23:07:20 (14397): Guest Log: vboxguest: misc device minor 56, IRQ 20, I/O port d020, MMIO at 00000000f0400000 (size 0x400000)
2025-01-22 23:07:47 (14397): Guest Log: VBoxService 5.2.6 r120293 (verbosity: 0) linux.amd64 (Jan 15 2018 14:51:00) release log
2025-01-22 23:07:47 (14397): Guest Log: 00:00:00.000061 main     Log opened 2025-01-22T22:07:52.949271000Z
2025-01-22 23:07:47 (14397): Guest Log: 00:00:00.000146 main     OS Product: Linux
2025-01-22 23:07:47 (14397): Guest Log: 00:00:00.000184 main     OS Release: 4.14.76-13.cernvm.x86_64
2025-01-22 23:07:47 (14397): Guest Log: 00:00:00.000221 main     OS Version: #1 SMP Tue Oct 16 18:26:15 CEST 2018
2025-01-22 23:07:47 (14397): Guest Log: 00:00:00.000257 main     Executable: /usr/sbin/VBoxService
2025-01-22 23:07:47 (14397): Guest Log: 00:00:00.000258 main     Process ID: 3258
2025-01-22 23:07:47 (14397): Guest Log: 00:00:00.000259 main     Package type: LINUX_64BITS_GENERIC
2025-01-22 23:07:47 (14397): Guest Log: 00:00:00.002942 main     5.2.6 r120293 started. Verbose level = 0
2025-01-22 23:11:49 (14397): Guest Log: 23:11:53 CET +01:00 2025-01-22: cranky: [INFO] Detected Theory App
2025-01-22 23:11:49 (14397): Guest Log: 23:11:53 CET +01:00 2025-01-22: cranky: [INFO] Checking CVMFS.
2025-01-22 23:11:50 (14397): Guest Log: Probing /cvmfs/sft.cern.ch... Failed!
2025-01-22 23:11:50 (14397): Guest Log: 23:11:54 CET +01:00 2025-01-22: cranky: [ERROR] 'cvmfs_config probe sft.cern.ch' failed.
2025-01-22 23:19:15 (14397): Stopping VM.
2025-01-22 23:19:17 (14397): Successfully stopped VM.
2025-01-22 23:19:23 (15562): vboxwrapper version 26207
2025-01-22 23:19:23 (15562): BOINC client version: 8.0.2
2025-01-22 23:19:23 (15562): Detected: VirtualBox VboxManage Interface (Version: 7.1.4)
2025-01-22 23:19:23 (15562): Detected: Sandbox Configuration Enabled
2025-01-22 23:19:23 (15562): Detected: Heartbeat check (file: 'heartbeat' every 1200.000000 seconds)
2025-01-22 23:19:23 (15562): Guest Log: BIOS: VirtualBox 7.1.4
2025-01-22 23:19:23 (15562): Guest Log: CPUID EDX: 0x178bfbff
2025-01-22 23:19:23 (15562): Guest Log: BIOS: No PCI IDE controller, not probing IDE
2025-01-22 23:19:23 (15562): Guest Log: BIOS: AHCI 0-P#0: PCHS=16383/16/63 LCHS=1024/255/63 0x0000000002800000 sectors
2025-01-22 23:19:23 (15562): Guest Log: BIOS: Boot : bseqnr=1, bootseq=0032
2025-01-22 23:19:23 (15562): Guest Log: BIOS: Booting from Hard Disk...
2025-01-22 23:19:23 (15562): Guest Log: BIOS: KBD: unsupported int 16h function 03
2025-01-22 23:19:23 (15562): Guest Log: BIOS: AX=0305 BX=0000 CX=0000 DX=0000 
2025-01-22 23:19:23 (15562): Guest Log: vgdrvHeartbeatInit: Setting up heartbeat to trigger every 2000 milliseconds
2025-01-22 23:19:23 (15562): Guest Log: vboxguest: misc device minor 56, IRQ 20, I/O port d020, MMIO at 00000000f0400000 (size 0x400000)
2025-01-22 23:19:23 (15562): Guest Log: VBoxService 5.2.6 r120293 (verbosity: 0) linux.amd64 (Jan 15 2018 14:51:00) release log
2025-01-22 23:19:23 (15562): Guest Log: 00:00:00.000061 main     Log opened 2025-01-22T22:07:52.949271000Z
2025-01-22 23:19:23 (15562): Guest Log: 00:00:00.000146 main     OS Product: Linux
2025-01-22 23:19:23 (15562): Guest Log: 00:00:00.000184 main     OS Release: 4.14.76-13.cernvm.x86_64
2025-01-22 23:19:23 (15562): Guest Log: 00:00:00.000221 main     OS Version: #1 SMP Tue Oct 16 18:26:15 CEST 2018
2025-01-22 23:19:23 (15562): Guest Log: 00:00:00.000257 main     Executable: /usr/sbin/VBoxService
2025-01-22 23:19:23 (15562): Guest Log: 00:00:00.000258 main     Process ID: 3258
2025-01-22 23:19:23 (15562): Guest Log: 00:00:00.000259 main     Package type: LINUX_64BITS_GENERIC
2025-01-22 23:19:23 (15562): Guest Log: 00:00:00.002942 main     5.2.6 r120293 started. Verbose level = 0
2025-01-22 23:19:23 (15562): Guest Log: 23:11:53 CET +01:00 2025-01-22: cranky: [INFO] Detected Theory App
2025-01-22 23:19:23 (15562): Guest Log: 23:11:53 CET +01:00 2025-01-22: cranky: [INFO] Checking CVMFS.
2025-01-22 23:19:23 (15562): Guest Log: Probing /cvmfs/sft.cern.ch... Failed!
2025-01-22 23:19:23 (15562): Guest Log: 23:11:54 CET +01:00 2025-01-22: cranky: [ERROR] 'cvmfs_config probe sft.cern.ch' failed.
2025-01-22 23:19:23 (15562): Starting VM using VBoxManage interface. (boinc_216789977e56d4fa, slot#4)
2025-01-22 23:19:25 (15562): Successfully started VM. (PID = '15578')
2025-01-22 23:19:25 (15562): Reporting VM Process ID to BOINC.
2025-01-22 23:19:25 (15562): VM state change detected. (old = 'poweredoff', new = 'running')
2025-01-22 23:19:25 (15562): Detected: Web Application Enabled (http://localhost:49648)
2025-01-22 23:19:25 (15562): Preference change detected
2025-01-22 23:19:25 (15562): Setting CPU throttle for VM. (100%)
2025-01-22 23:19:25 (15562): Setting checkpoint interval to 600 seconds. (Higher value of (Preference: 60 seconds) or (Vbox_job.xml: 600 seconds))

vboxreplay.txt

VBoxManage -q --version 
VBoxManage -q list systemproperties
VBoxManage -q list hostinfo 
VBoxManage -q showvminfo "boinc_216789977e56d4fa" --machinereadable 
VBoxManage -q createvm --name "boinc_216789977e56d4fa" --basefolder "/Library/Application Support/BOINC Data/slots/4" --ostype "Linux26_64" --register
VBoxManage -q modifyvm "boinc_216789977e56d4fa" --description "Theory_2773-2970489-386_2" 
VBoxManage -q modifyvm "boinc_216789977e56d4fa" --memory 630 
VBoxManage -q modifyvm "boinc_216789977e56d4fa" --cpus 1 
VBoxManage -q modifyvm "boinc_216789977e56d4fa" --acpi on --ioapic on --rtcuseutc on 
VBoxManage -q modifyvm "boinc_216789977e56d4fa" --vram 16 --graphicscontroller VBoxVGA 
VBoxManage -q modifyvm "boinc_216789977e56d4fa" --boot1 disk --boot2 dvd --boot3 none --boot4 none 
VBoxManage -q modifyvm "boinc_216789977e56d4fa" --nic1 nat --natdnsproxy1 on --cableconnected1 off 
VBoxManage -q modifyvm "boinc_216789977e56d4fa" --cableconnected1 on 
VBoxManage -q modifyvm "boinc_216789977e56d4fa" --usb off 
VBoxManage -q modifyvm "boinc_216789977e56d4fa" --uart1 off --uart2 off 
VBoxManage -q modifyvm "boinc_216789977e56d4fa" --audio-enabled off 
VBoxManage -q modifyvm "boinc_216789977e56d4fa" --clipboard disabled 
VBoxManage -q modifyvm "boinc_216789977e56d4fa" --draganddrop disabled 
VBoxManage -q storagectl "boinc_216789977e56d4fa" --name "Hard Disk Controller" --add "sata" --controller "IntelAHCI" --hostiocache off --portcount 3
VBoxManage -q showhdinfo "/Library/Application Support/BOINC Data/projects/lhcathome.cern.ch_lhcathome/Theory_2025_01_16_prod.vdi" 
VBoxManage -q storageattach "boinc_216789977e56d4fa" --storagectl "Hard Disk Controller" --port 0 --device 0 --type hdd --medium "/Library/Application Support/BOINC Data/projects/lhcathome.cern.ch_lhcathome/Theory_2025_01_16_prod.vdi" 
VBoxManage -q storageattach "boinc_216789977e56d4fa" --storagectl "Hard Disk Controller" --port 0 --device 0 --type hdd --medium none 
VBoxManage -q storageattach "boinc_216789977e56d4fa" --storagectl "Hard Disk Controller" --port 0 --device 0 --type hdd --mtype multiattach --medium "/Library/Application Support/BOINC Data/projects/lhcathome.cern.ch_lhcathome/Theory_2025_01_16_prod.vdi" 
VBoxManage -q storageattach "boinc_216789977e56d4fa" --storagectl "Hard Disk Controller" --port 1 --device 0 --type dvddrive --medium "/Applications/VirtualBox.app/Contents/MacOS/VBoxGuestAdditions.iso" 
VBoxManage -q bandwidthctl "boinc_216789977e56d4fa" add "boinc_216789977e56d4fa_net" --type network --limit 1024G 
VBoxManage -q modifyvm "boinc_216789977e56d4fa" --natpf1 ",tcp,127.0.0.1,49648,,80" 
VBoxManage -q list extpacks
VBoxManage -q sharedfolder add "boinc_216789977e56d4fa" --name "shared" --hostpath "/Library/Application Support/BOINC Data/slots/4/shared"
VBoxManage -q startvm "boinc_216789977e56d4fa" --type headless
VBoxManage -q controlvm "boinc_216789977e56d4fa" cpuexecutioncap 100 
VBoxManage -q controlvm "boinc_216789977e56d4fa" savestate
VBoxManage -q --version 
VBoxManage -q list systemproperties
VBoxManage -q list hostinfo 
VBoxManage -q showvminfo "boinc_216789977e56d4fa" --machinereadable 
VBoxManage -q startvm "boinc_216789977e56d4fa" --type headless
VBoxManage -q controlvm "boinc_216789977e56d4fa" cpuexecutioncap 100 

vbox_trace.txt

2025-01-22 23:05:20 (14397): 
Command: VBoxManage -q --version 
Exit Code: 0
Output:
7.1.4r165100

2025-01-22 23:05:20 (14397): 
Command: VBoxManage -q list systemproperties
Exit Code: 0
Output:
API version:                     7_1
Minimum guest RAM size:          4 Megabytes
Maximum guest RAM size:          2097152 Megabytes
Minimum video RAM size:          0 Megabytes
Maximum video RAM size:          256 Megabytes
Maximum guest monitor count:     64
Minimum guest CPU count:         1
Maximum guest CPU count:         64
Virtual disk limit (info):       2199022206976 Bytes
Default machine folder:          /Users/nentech/VirtualBox VMs
Raw-mode Supported:              no
Exclusive HW virtualization use: off
Default hard disk format:        VDI
VRDE auth library:               VBoxAuth
Webservice auth. library:        VBoxAuth
Remote desktop ExtPack:          Oracle VirtualBox Extension Pack
VM encryption ExtPack:           Oracle VirtualBox Extension Pack
Log history count:               3
Default frontend:                
Default audio driver:            CoreAudio
Autostart database path:         
Default Guest Additions ISO:     /Applications/VirtualBox.app/Contents/MacOS/VBoxGuestAdditions.iso
Logging Level:                   all
Proxy Mode:                      System
Proxy URL:                       
User language:                   C
Host platform properties:
Maximum Serial Port count:              4
Maximum Parallel Port count:            2
Maximum Boot Position:                  4
Maximum Floppy Port count:              1
Maximum Floppy Devices per Port:        2
Maximum virtio-scsi Port count:         256
Maximum virtio-scsi Devices per Port:   1
Maximum IDE Port count:                 2
Maximum IDE Devices per port:           2
Maximum SATA Port count:                30
Maximum SATA Device per port:          1
Maximum SCSI Port count:                16
Maximum SCSI Devices per port:          1
Maximum SAS Port count:                 255
Maximum SAS Devices per Port:           1
Maximum NVMe Port count:                255
Maximum NVMe Devices per Port:          1
Supported chipsets:                     PIIX3, ICH9
PIIX3 chipset properties:
Maximum PIIX3 Network Adapter count:   8
Maximum PIIX3 IDE Controllers:   1
Maximum PIIX3 SATA Controllers:  1
Maximum PIIX3 SCSI Controllers:  1
Maximum PIIX3 SAS Controllers:   1
Maximum PIIX3 NVMe Controllers:  1
Maximum PIIX3 virtio-scsi Controllers:  1
Maximum PIIX3 Floppy Controllers:1

ICH9 chipset properties:
Maximum ICH9 Network Adapter count:   36
Maximum ICH9 IDE Controllers:   1
Maximum ICH9 SATA Controllers:  8
Maximum ICH9 SCSI Controllers:  8
Maximum ICH9 SAS Controllers:   8
Maximum ICH9 NVMe Controllers:  8
Maximum ICH9 virtio-scsi Controllers:  8
Maximum ICH9 Floppy Controllers:1

Supported platform architectures: x86

x86 platform properties:
Maximum Serial Port count:              4
Maximum Parallel Port count:            2
Maximum Boot Position:                  4
Maximum Floppy Port count:              1
Maximum Floppy Devices per Port:        2
Maximum virtio-scsi Port count:         256
Maximum virtio-scsi Devices per Port:   1
Maximum IDE Port count:                 2
Maximum IDE Devices per port:           2
Maximum SATA Port count:                30
Maximum SATA Device per port:          1
Maximum SCSI Port count:                16
Maximum SCSI Devices per port:          1
Maximum SAS Port count:                 255
Maximum SAS Devices per Port:           1
Maximum NVMe Port count:                255
Maximum NVMe Devices per Port:          1
Supported chipsets:                     PIIX3, ICH9
PIIX3 chipset properties:
Maximum PIIX3 Network Adapter count:   8
Maximum PIIX3 IDE Controllers:   1
Maximum PIIX3 SATA Controllers:  1
Maximum PIIX3 SCSI Controllers:  1
Maximum PIIX3 SAS Controllers:   1
Maximum PIIX3 NVMe Controllers:  1
Maximum PIIX3 virtio-scsi Controllers:  1
Maximum PIIX3 Floppy Controllers:1

ICH9 chipset properties:
Maximum ICH9 Network Adapter count:   36
Maximum ICH9 IDE Controllers:   1
Maximum ICH9 SATA Controllers:  8
Maximum ICH9 SCSI Controllers:  8
Maximum ICH9 SAS Controllers:   8
Maximum ICH9 NVMe Controllers:  8
Maximum ICH9 virtio-scsi Controllers:  8
Maximum ICH9 Floppy Controllers:1

2025-01-22 23:05:20 (14397): 
Command: VBoxManage -q list hostinfo 
Exit Code: 0
Output:
Host Information:

Host time: 2025-01-22T22:05:20.297000000Z
Processor online count: 12
Processor count: 12
Processor online core count: 6
Processor core count: 6
Processor supports HW virtualization: yes
Processor supports PAE: yes
Processor supports long mode: yes
Processor supports nested paging: no
Processor supports unrestricted guest: yes
Processor supports nested HW virtualization: no
Processor supports virt. vmsave/vmload: no
Processor#0 speed: 2600 MHz
Processor#0 description: Intel(R) Core(TM) i7-9750H CPU @ 2.60GHz
Processor#1 speed: 2600 MHz
Processor#1 description: Intel(R) Core(TM) i7-9750H CPU @ 2.60GHz
Processor#2 speed: 2600 MHz
Processor#2 description: Intel(R) Core(TM) i7-9750H CPU @ 2.60GHz
Processor#3 speed: 2600 MHz
Processor#3 description: Intel(R) Core(TM) i7-9750H CPU @ 2.60GHz
Processor#4 speed: 2600 MHz
Processor#4 description: Intel(R) Core(TM) i7-9750H CPU @ 2.60GHz
Processor#5 speed: 2600 MHz
Processor#5 description: Intel(R) Core(TM) i7-9750H CPU @ 2.60GHz
Processor#6 speed: 2600 MHz
Processor#6 description: Intel(R) Core(TM) i7-9750H CPU @ 2.60GHz
Processor#7 speed: 2600 MHz
Processor#7 description: Intel(R) Core(TM) i7-9750H CPU @ 2.60GHz
Processor#8 speed: 2600 MHz
Processor#8 description: Intel(R) Core(TM) i7-9750H CPU @ 2.60GHz
Processor#9 speed: 2600 MHz
Processor#9 description: Intel(R) Core(TM) i7-9750H CPU @ 2.60GHz
Processor#10 speed: 2600 MHz
Processor#10 description: Intel(R) Core(TM) i7-9750H CPU @ 2.60GHz
Processor#11 speed: 2600 MHz
Processor#11 description: Intel(R) Core(TM) i7-9750H CPU @ 2.60GHz
Memory size: 32768 MByte
Memory available: 14994 MByte
Operating system: Darwin
Operating system version: 24.2.0

2025-01-22 23:05:20 (14397): 
Command: VBoxManage -q showvminfo "boinc_216789977e56d4fa" --machinereadable 
Exit Code: -2135228415
Output:
VBoxManage: error: Could not find a registered machine named 'boinc_216789977e56d4fa'
VBoxManage: error: Details: code VBOX_E_OBJECT_NOT_FOUND (0x80bb0001), component VirtualBoxWrap, interface IVirtualBox, callee nsISupports
VBoxManage: error: Context: "FindMachine(Bstr(VMNameOrUuid).raw(), machine.asOutParam())" at line 3212 of file VBoxManageInfo.cpp

2025-01-22 23:05:20 (14397): 
Command: VBoxManage -q createvm --name "boinc_216789977e56d4fa" --basefolder "/Library/Application Support/BOINC Data/slots/4" --ostype "Linux26_64" --register
Exit Code: 0
Output:
Virtual machine 'boinc_216789977e56d4fa' is created and registered.
UUID: 2b2048d0-9d18-4427-9ec2-e8eddb02aa8e
Settings file: '/Library/Application Support/BOINC Data/slots/4/boinc_216789977e56d4fa/boinc_216789977e56d4fa.vbox'

2025-01-22 23:05:20 (14397): 
Command: VBoxManage -q modifyvm "boinc_216789977e56d4fa" --description "Theory_2773-2970489-386_2" 
Exit Code: 0
Output:

2025-01-22 23:05:20 (14397): 
Command: VBoxManage -q modifyvm "boinc_216789977e56d4fa" --memory 630 
Exit Code: 0
Output:

2025-01-22 23:05:20 (14397): 
Command: VBoxManage -q modifyvm "boinc_216789977e56d4fa" --cpus 1 
Exit Code: 0
Output:

2025-01-22 23:05:20 (14397): 
Command: VBoxManage -q modifyvm "boinc_216789977e56d4fa" --acpi on --ioapic on --rtcuseutc on 
Exit Code: 0
Output:

2025-01-22 23:05:20 (14397): 
Command: VBoxManage -q modifyvm "boinc_216789977e56d4fa" --vram 16 --graphicscontroller VBoxVGA 
Exit Code: 0
Output:

2025-01-22 23:05:20 (14397): 
Command: VBoxManage -q modifyvm "boinc_216789977e56d4fa" --boot1 disk --boot2 dvd --boot3 none --boot4 none 
Exit Code: 0
Output:

2025-01-22 23:05:20 (14397): 
Command: VBoxManage -q modifyvm "boinc_216789977e56d4fa" --nic1 nat --natdnsproxy1 on --cableconnected1 off 
Exit Code: 0
Output:

2025-01-22 23:05:20 (14397): 
Command: VBoxManage -q modifyvm "boinc_216789977e56d4fa" --cableconnected1 on 
Exit Code: 0
Output:

2025-01-22 23:05:20 (14397): 
Command: VBoxManage -q modifyvm "boinc_216789977e56d4fa" --usb off 
Exit Code: 0
Output:

2025-01-22 23:05:20 (14397): 
Command: VBoxManage -q modifyvm "boinc_216789977e56d4fa" --uart1 off --uart2 off 
Exit Code: 0
Output:

2025-01-22 23:05:20 (14397): 
Command: VBoxManage -q modifyvm "boinc_216789977e56d4fa" --audio-enabled off 
Exit Code: 0
Output:

2025-01-22 23:05:20 (14397): 
Command: VBoxManage -q modifyvm "boinc_216789977e56d4fa" --clipboard disabled 
Exit Code: 0
Output:

2025-01-22 23:05:20 (14397): 
Command: VBoxManage -q modifyvm "boinc_216789977e56d4fa" --draganddrop disabled 
Exit Code: 0
Output:

2025-01-22 23:05:20 (14397): 
Command: VBoxManage -q storagectl "boinc_216789977e56d4fa" --name "Hard Disk Controller" --add "sata" --controller "IntelAHCI" --hostiocache off --portcount 3
Exit Code: 0
Output:

2025-01-22 23:05:20 (14397): 
Command: VBoxManage -q showhdinfo "/Library/Application Support/BOINC Data/projects/lhcathome.cern.ch_lhcathome/Theory_2025_01_16_prod.vdi" 
Exit Code: 0
Output:
UUID:           6a4110e9-e559-4c1c-bfd2-ba6f6aaf4169
Parent UUID:    base
State:          created
Type:           normal (base)
Location:       /Library/Application Support/BOINC Data/projects/lhcathome.cern.ch_lhcathome/Theory_2025_01_16_prod.vdi
Storage format: VDI
Format variant: dynamic default
Capacity:       20480 MBytes
Size on disk:   781 MBytes
Encryption:     disabled
Property:       AllocationBlockSize=1048576

2025-01-22 23:05:21 (14397): 
Command: VBoxManage -q storageattach "boinc_216789977e56d4fa" --storagectl "Hard Disk Controller" --port 0 --device 0 --type hdd --medium "/Library/Application Support/BOINC Data/projects/lhcathome.cern.ch_lhcathome/Theory_2025_01_16_prod.vdi" 
Exit Code: 0
Output:

2025-01-22 23:05:21 (14397): 
Command: VBoxManage -q storageattach "boinc_216789977e56d4fa" --storagectl "Hard Disk Controller" --port 0 --device 0 --type hdd --medium none 
Exit Code: 0
Output:

2025-01-22 23:05:21 (14397): 
Command: VBoxManage -q storageattach "boinc_216789977e56d4fa" --storagectl "Hard Disk Controller" --port 0 --device 0 --type hdd --mtype multiattach --medium "/Library/Application Support/BOINC Data/projects/lhcathome.cern.ch_lhcathome/Theory_2025_01_16_prod.vdi" 
Exit Code: 0
Output:

2025-01-22 23:05:21 (14397): 
Command: VBoxManage -q storageattach "boinc_216789977e56d4fa" --storagectl "Hard Disk Controller" --port 1 --device 0 --type dvddrive --medium "/Applications/VirtualBox.app/Contents/MacOS/VBoxGuestAdditions.iso" 
Exit Code: 0
Output:

2025-01-22 23:05:21 (14397): 
Command: VBoxManage -q bandwidthctl "boinc_216789977e56d4fa" add "boinc_216789977e56d4fa_net" --type network --limit 1024G 
Exit Code: 0
Output:

2025-01-22 23:05:21 (14397): 
Command: VBoxManage -q modifyvm "boinc_216789977e56d4fa" --natpf1 ",tcp,127.0.0.1,49648,,80" 
Exit Code: 0
Output:

2025-01-22 23:05:21 (14397): 
Command: VBoxManage -q list extpacks
Exit Code: 0
Output:
Extension Packs: 1
Pack no. 0:   Oracle VirtualBox Extension Pack
Version:        7.1.4
Revision:       165100
Edition:        
Description:    Oracle Cloud Infrastructure integration, Host Webcam, VirtualBox RDP, PXE ROM, Disk Encryption, NVMe, full VM encryption.
VRDE Module:    VBoxVRDP
Crypto Module:  VBoxPuelCrypto
Usable:         true
Why unusable:   

2025-01-22 23:05:21 (14397): 
Command: VBoxManage -q sharedfolder add "boinc_216789977e56d4fa" --name "shared" --hostpath "/Library/Application Support/BOINC Data/slots/4/shared"
Exit Code: 0
Output:

2025-01-22 23:05:22 (14397): 
Command: VBoxManage -q startvm "boinc_216789977e56d4fa" --type headless
Exit Code: 0
Output:
Waiting for VM "boinc_216789977e56d4fa" to power on...
VM "boinc_216789977e56d4fa" has been successfully started.

2025-01-22 23:05:23 (14397): 
Command: VBoxManage -q controlvm "boinc_216789977e56d4fa" cpuexecutioncap 100 
Exit Code: 0
Output:

2025-01-22 23:19:17 (14397): 
Command: VBoxManage -q controlvm "boinc_216789977e56d4fa" savestate
Exit Code: 0
Output:
0%...10%...20%...30%...40%...50%...60%...70%...80%...90%...100%

2025-01-22 23:19:23 (15562): 
Command: VBoxManage -q --version 
Exit Code: 0
Output:
7.1.4r165100

2025-01-22 23:19:23 (15562): 
Command: VBoxManage -q list systemproperties
Exit Code: 0
Output:
API version:                     7_1
Minimum guest RAM size:          4 Megabytes
Maximum guest RAM size:          2097152 Megabytes
Minimum video RAM size:          0 Megabytes
Maximum video RAM size:          256 Megabytes
Maximum guest monitor count:     64
Minimum guest CPU count:         1
Maximum guest CPU count:         64
Virtual disk limit (info):       2199022206976 Bytes
Default machine folder:          /Users/nentech/VirtualBox VMs
Raw-mode Supported:              no
Exclusive HW virtualization use: off
Default hard disk format:        VDI
VRDE auth library:               VBoxAuth
Webservice auth. library:        VBoxAuth
Remote desktop ExtPack:          Oracle VirtualBox Extension Pack
VM encryption ExtPack:           Oracle VirtualBox Extension Pack
Log history count:               3
Default frontend:                
Default audio driver:            CoreAudio
Autostart database path:         
Default Guest Additions ISO:     /Applications/VirtualBox.app/Contents/MacOS/VBoxGuestAdditions.iso
Logging Level:                   all
Proxy Mode:                      System
Proxy URL:                       
User language:                   C
Host platform properties:
Maximum Serial Port count:              4
Maximum Parallel Port count:            2
Maximum Boot Position:                  4
Maximum Floppy Port count:              1
Maximum Floppy Devices per Port:        2
Maximum virtio-scsi Port count:         256
Maximum virtio-scsi Devices per Port:   1
Maximum IDE Port count:                 2
Maximum IDE Devices per port:           2
Maximum SATA Port count:                30
Maximum SATA Device per port:          1
Maximum SCSI Port count:                16
Maximum SCSI Devices per port:          1
Maximum SAS Port count:                 255
Maximum SAS Devices per Port:           1
Maximum NVMe Port count:                255
Maximum NVMe Devices per Port:          1
Supported chipsets:                     PIIX3, ICH9
PIIX3 chipset properties:
Maximum PIIX3 Network Adapter count:   8
Maximum PIIX3 IDE Controllers:   1
Maximum PIIX3 SATA Controllers:  1
Maximum PIIX3 SCSI Controllers:  1
Maximum PIIX3 SAS Controllers:   1
Maximum PIIX3 NVMe Controllers:  1
Maximum PIIX3 virtio-scsi Controllers:  1
Maximum PIIX3 Floppy Controllers:1

ICH9 chipset properties:
Maximum ICH9 Network Adapter count:   36
Maximum ICH9 IDE Controllers:   1
Maximum ICH9 SATA Controllers:  8
Maximum ICH9 SCSI Controllers:  8
Maximum ICH9 SAS Controllers:   8
Maximum ICH9 NVMe Controllers:  8
Maximum ICH9 virtio-scsi Controllers:  8
Maximum ICH9 Floppy Controllers:1

Supported platform architectures: x86

x86 platform properties:
Maximum Serial Port count:              4
Maximum Parallel Port count:            2
Maximum Boot Position:                  4
Maximum Floppy Port count:              1
Maximum Floppy Devices per Port:        2
Maximum virtio-scsi Port count:         256
Maximum virtio-scsi Devices per Port:   1
Maximum IDE Port count:                 2
Maximum IDE Devices per port:           2
Maximum SATA Port count:                30
Maximum SATA Device per port:          1
Maximum SCSI Port count:                16
Maximum SCSI Devices per port:          1
Maximum SAS Port count:                 255
Maximum SAS Devices per Port:           1
Maximum NVMe Port count:                255
Maximum NVMe Devices per Port:          1
Supported chipsets:                     PIIX3, ICH9
PIIX3 chipset properties:
Maximum PIIX3 Network Adapter count:   8
Maximum PIIX3 IDE Controllers:   1
Maximum PIIX3 SATA Controllers:  1
Maximum PIIX3 SCSI Controllers:  1
Maximum PIIX3 SAS Controllers:   1
Maximum PIIX3 NVMe Controllers:  1
Maximum PIIX3 virtio-scsi Controllers:  1
Maximum PIIX3 Floppy Controllers:1

ICH9 chipset properties:
Maximum ICH9 Network Adapter count:   36
Maximum ICH9 IDE Controllers:   1
Maximum ICH9 SATA Controllers:  8
Maximum ICH9 SCSI Controllers:  8
Maximum ICH9 SAS Controllers:   8
Maximum ICH9 NVMe Controllers:  8
Maximum ICH9 virtio-scsi Controllers:  8
Maximum ICH9 Floppy Controllers:1

2025-01-22 23:19:23 (15562): 
Command: VBoxManage -q list hostinfo 
Exit Code: 0
Output:
Host Information:

Host time: 2025-01-22T22:19:23.467000000Z
Processor online count: 12
Processor count: 12
Processor online core count: 6
Processor core count: 6
Processor supports HW virtualization: yes
Processor supports PAE: yes
Processor supports long mode: yes
Processor supports nested paging: no
Processor supports unrestricted guest: yes
Processor supports nested HW virtualization: no
Processor supports virt. vmsave/vmload: no
Processor#0 speed: 2600 MHz
Processor#0 description: Intel(R) Core(TM) i7-9750H CPU @ 2.60GHz
Processor#1 speed: 2600 MHz
Processor#1 description: Intel(R) Core(TM) i7-9750H CPU @ 2.60GHz
Processor#2 speed: 2600 MHz
Processor#2 description: Intel(R) Core(TM) i7-9750H CPU @ 2.60GHz
Processor#3 speed: 2600 MHz
Processor#3 description: Intel(R) Core(TM) i7-9750H CPU @ 2.60GHz
Processor#4 speed: 2600 MHz
Processor#4 description: Intel(R) Core(TM) i7-9750H CPU @ 2.60GHz
Processor#5 speed: 2600 MHz
Processor#5 description: Intel(R) Core(TM) i7-9750H CPU @ 2.60GHz
Processor#6 speed: 2600 MHz
Processor#6 description: Intel(R) Core(TM) i7-9750H CPU @ 2.60GHz
Processor#7 speed: 2600 MHz
Processor#7 description: Intel(R) Core(TM) i7-9750H CPU @ 2.60GHz
Processor#8 speed: 2600 MHz
Processor#8 description: Intel(R) Core(TM) i7-9750H CPU @ 2.60GHz
Processor#9 speed: 2600 MHz
Processor#9 description: Intel(R) Core(TM) i7-9750H CPU @ 2.60GHz
Processor#10 speed: 2600 MHz
Processor#10 description: Intel(R) Core(TM) i7-9750H CPU @ 2.60GHz
Processor#11 speed: 2600 MHz
Processor#11 description: Intel(R) Core(TM) i7-9750H CPU @ 2.60GHz
Memory size: 32768 MByte
Memory available: 15939 MByte
Operating system: Darwin
Operating system version: 24.2.0

2025-01-22 23:19:23 (15562): 
Command: VBoxManage -q showvminfo "boinc_216789977e56d4fa" --machinereadable 
Exit Code: 0
Output:
name="boinc_216789977e56d4fa"
encryption="disabled"
groups="/"
platformArchitecture="x86"
ostype="Linux 2.6 / 3.x / 4.x / 5.x (64-bit)"
UUID="2b2048d0-9d18-4427-9ec2-e8eddb02aa8e"
CfgFile="/Library/Application Support/BOINC Data/slots/4/boinc_216789977e56d4fa/boinc_216789977e56d4fa.vbox"
SnapFldr="/Library/Application Support/BOINC Data/slots/4/boinc_216789977e56d4fa/Snapshots"
LogFldr="/Library/Application Support/BOINC Data/slots/4/boinc_216789977e56d4fa/Logs"
hardwareuuid="2b2048d0-9d18-4427-9ec2-e8eddb02aa8e"
memory=630
pagefusion="off"
vram=16
cpuexecutioncap=100
cpu-profile="host"
chipset="piix3"
firmware="BIOS"
cpus=1
hpet="off"
pae="off"
longmode="on"
triplefaultreset="off"
apic="on"
x2apic="on"
nested-hw-virt="off"
hwvirtex="on"
nestedpaging="on"
largepages="on"
vtxvpid="on"
vtxux="on"
virtvmsavevmload="on"
cpuid-portability-level=0
bootmenu="messageandmenu"
boot1="disk"
boot2="dvd"
boot3="none"
boot4="none"
acpi="on"
ioapic="on"
biosapic="apic"
biossystemtimeoffset=0
NvramFile="/Library/Application Support/BOINC Data/slots/4/boinc_216789977e56d4fa/boinc_216789977e56d4fa.nvram"
rtcuseutc="on"
iommu="none"
paravirtprovider="default"
effparavirtprovider="kvm"
VMState="saved"
VMStateChangeTime="2025-01-22T22:19:17.000000000"
VMStateFile="/Library/Application Support/BOINC Data/slots/4/boinc_216789977e56d4fa/Snapshots/2025-01-22T22-19-15-394377000Z.sav"
graphicscontroller="vboxvga"
monitorcount=1
accelerate3d="off"
teleporterenabled="off"
teleporterport=0
teleporteraddress=""
teleporterpassword=""
tracing-enabled="off"
tracing-allow-vm-access="off"
tracing-config=""
autostart-enabled="off"
autostart-delay=0
defaultfrontend=""
vmprocpriority="default"
storagecontrollername0="Hard Disk Controller"
storagecontrollertype0="IntelAhci"
storagecontrollerinstance0="0"
storagecontrollermaxportcount0="30"
storagecontrollerportcount0="3"
storagecontrollerbootable0="on"
"Hard Disk Controller-0-0"="/Library/Application Support/BOINC Data/slots/4/boinc_216789977e56d4fa/Snapshots/{a87cdcf9-a39f-4c57-ade3-18979ba5f529}.vdi"
"Hard Disk Controller-ImageUUID-0-0"="a87cdcf9-a39f-4c57-ade3-18979ba5f529"
"Hard Disk Controller-nonrotational-0-0"="off"
"Hard Disk Controller-discard-0-0"="off"
"Hard Disk Controller-1-0"="/Applications/VirtualBox.app/Contents/MacOS/VBoxGuestAdditions.iso"
"Hard Disk Controller-ImageUUID-1-0"="f6b5d75a-3ebd-4110-90a7-bfc4f2b65788"
"Hard Disk Controller-tempeject-1-0"="off"
"Hard Disk Controller-IsEjected-1-0"="off"
"Hard Disk Controller-nonrotational-1-0"="off"
"Hard Disk Controller-discard-1-0"="off"
"Hard Disk Controller-2-0"="none"
natnet1="nat"
macaddress1="080027E120FC"
cableconnected1="on"
nic1="nat"
nictype1="82540EM"
nicspeed1="0"
mtu="0"
sockSnd="64"
sockRcv="64"
tcpWndSnd="64"
tcpWndRcv="64"
Forwarding(0)="tcp_49648_80,tcp,127.0.0.1,49648,,80"
nic2="none"
nic3="none"
nic4="none"
nic5="none"
nic6="none"
nic7="none"
nic8="none"
hidpointing="ps2mouse"
hidkeyboard="ps2kbd"
uart1="off"
uart2="off"
uart3="off"
uart4="off"
lpt1="off"
lpt2="off"
audio="none"
audio_out="off"
audio_in="off"
clipboard="disabled"
draganddrop="disabled"
vrde="off"
usb="off"
ehci="off"
xhci="off"
BandwidthGroup0="boinc_216789977e56d4fa_net",Network,1099511627776
SharedFolderNameMachineMapping1="shared"
SharedFolderPathMachineMapping1="/Library/Application Support/BOINC Data/slots/4/shared"
recording_started="off"
recording_enabled="off"
recording_screens=1
 rec_screen0
rec_screen_enabled="on"
rec_screen_id=0
rec_screen_video_enabled="on"
rec_screen_audio_enabled="off"
rec_screen_dest="File"
rec_screen_dest_filename="/Library/Application Support/BOINC Data/slots/4/boinc_216789977e56d4fa/boinc_216789977e56d4fa-screen0.webm"
rec_screen_opts="vc_enabled=true,ac_enabled=false,ac_profile=med"
rec_screen_video_res_xy="1024x768"
rec_screen_video_rate_kbps=512
rec_screen_video_fps=25
description="Theory_2773-2970489-386_2"
GuestMemoryBalloon=0

2025-01-22 23:19:24 (15562): 
Command: VBoxManage -q startvm "boinc_216789977e56d4fa" --type headless
Exit Code: 0
Output:
Waiting for VM "boinc_216789977e56d4fa" to power on...
VM "boinc_216789977e56d4fa" has been successfully started.

2025-01-22 23:19:25 (15562): 
Command: VBoxManage -q controlvm "boinc_216789977e56d4fa" cpuexecutioncap 100 
Exit Code: 0
Output:

The VM runs under boinc_project user.

ATLAS tasks running successfully. CMS and Theory tasks are crashing.

[/img]https://lhcathome.cern.ch/lhcathome/result.php?resultid=419251802[url][/url]