Name Theory_2922-4790405-742_1
Workunit 240282334
Created 2 Apr 2026, 0:57:37 UTC
Sent 2 Apr 2026, 3:14:42 UTC
Report deadline 13 Apr 2026, 3:14:42 UTC
Received 4 Apr 2026, 0:39:51 UTC
Server state Over
Outcome Computation error
Client state Compute error
Exit status 206 (0x000000CE) EXIT_INIT_FAILURE
Computer ID 10816208
Run time 9 hours 30 min 20 sec
CPU time 9 hours 30 min 20 sec
Priority 0
Validate state Invalid
Credit 0.00
Device peak FLOPS 7.48 GFLOPS
Application version Theory Simulation v302.10 (docker)
windows_x86_64
Peak working set size 13.49 MB
Peak swap size 2.56 MB
Peak disk usage 3.57 MB

Stderr output

<core_client_version>8.2.4</core_client_version>
<![CDATA[
<message>
The filename or extension is too long.
 (0xce) - exit code 206 (0xce)</message>
<stderr_txt>
*************************************************************
CVMFS server: http://s1ral-cvmfs.openhtc.io
CVMFS proxy:  DIRECT
No local HTTP proxy found.
With this setup concurrently running containers can't share
a common CVMFS cache. A local HTTP proxy is therefore
highly recommended.
More info how to configure a local HTTP proxy:
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5473
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5474
******************************************************************
Environment HTTP proxy: not set
job: htmld=/var/www/lighttpd
job: unpack exitcode=0
Could not find a local HTTP proxy
CVMFS and Frontier will have to use DIRECT connections
This makes the application less efficient
It also puts higher load on the project servers
Setting up a local HTTP proxy is highly recommended
Advice can be found in the project forum
Using custom CVMFS.
Probing CVMFS repositories ...
Probing /cvmfs/alice.cern.ch... OK
Probing /cvmfs/cvmfs-config.cern.ch... OK
Probing /cvmfs/grid.cern.ch... OK
Probing /cvmfs/sft.cern.ch... OK
Excerpt from "cvmfs_config stat":
VERSION   HOST                           PROXY
2.13.3.0  http://s1ral-cvmfs.openhtc.io  DIRECT
******************************************************************
                        IMPORTANT HINT(S)!
******************************************************************
CVMFS server: http://s1ral-cvmfs.openhtc.io
CVMFS proxy:  DIRECT
No local HTTP proxy found.
With this setup concurrently running containers can't share
a common CVMFS cache. A local HTTP proxy is therefore
highly recommended.
More info how to configure a local HTTP proxy:
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5473
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5474
******************************************************************
Environment HTTP proxy: not set
job: htmld=/var/www/lighttpd
job: unpack exitcode=0
Could not find a local HTTP proxy
CVMFS and Frontier will have to use DIRECT connections
This makes the application less efficient
It also puts higher load on the project servers
Setting up a local HTTP proxy is highly recommended
Advice can be found in the project forum
Using custom CVMFS.
Probing CVMFS repositories ...
Probing /cvmfs/alice.cern.ch... OK
Probing /cvmfs/cvmfs-config.cern.ch... OK
Probing /cvmfs/grid.cern.ch... OK
Probing /cvmfs/sft.cern.ch... OK
Excerpt from "cvmfs_config stat":
VERSION   HOST                           PROXY
2.13.3.0  http://s1ral-cvmfs.openhtc.io  DIRECT
******************************************************************
                        IMPORTANT HINT(S)!
******************************************************************
CVMFS server: http://s1ral-cvmfs.openhtc.io
CVMFS proxy:  DIRECT
No local HTTP proxy found.
With this setup concurrently running containers can't share
a common CVMFS cache. A local HTTP proxy is therefore
highly recommended.
More info how to configure a local HTTP proxy:
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5473
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5474
******************************************************************
Environment HTTP proxy: not set
job: htmld=/var/www/lighttpd
job: unpack exitcode=0
Could not find a local HTTP proxy
CVMFS and Frontier will have to use DIRECT connections
This makes the application less efficient
It also puts higher load on the project servers
Setting up a local HTTP proxy is highly recommended
Advice can be found in the project forum
Using custom CVMFS.
Probing CVMFS repositories ...
Probing /cvmfs/alice.cern.ch... OK
Probing /cvmfs/cvmfs-config.cern.ch... OK
Probing /cvmfs/grid.cern.ch... OK
Probing /cvmfs/sft.cern.ch... OK
Excerpt from "cvmfs_config stat":
VERSION   HOST                           PROXY
2.13.3.0  http://s1ral-cvmfs.openhtc.io  DIRECT
******************************************************************
                        IMPORTANT HINT(S)!
******************************************************************
CVMFS server: http://s1ral-cvmfs.openhtc.io
CVMFS proxy:  DIRECT
No local HTTP proxy found.
With this setup concurrently running containers can't share
a common CVMFS cache. A local HTTP proxy is therefore
highly recommended.
More info how to configure a local HTTP proxy:
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5473
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5474
******************************************************************
Environment HTTP proxy: not set
job: htmld=/var/www/lighttpd
job: unpack exitcode=0
Could not find a local HTTP proxy
CVMFS and Frontier will have to use DIRECT connections
This makes the application less efficient
It also puts higher load on the project servers
Setting up a local HTTP proxy is highly recommended
Advice can be found in the project forum
Using custom CVMFS.
Probing CVMFS repositories ...
Probing /cvmfs/alice.cern.ch... OK
Probing /cvmfs/cvmfs-config.cern.ch... OK
Probing /cvmfs/grid.cern.ch... OK
Probing /cvmfs/sft.cern.ch... OK
Excerpt from "cvmfs_config stat":
VERSION   HOST                           PROXY
2.13.3.0  http://s1ral-cvmfs.openhtc.io  DIRECT
******************************************************************
                        IMPORTANT HINT(S)!
******************************************************************
CVMFS server: http://s1ral-cvmfs.openhtc.io
CVMFS proxy:  DIRECT
No local HTTP proxy found.
With this setup concurrently running containers can't share
a common CVMFS cache. A local HTTP proxy is therefore
highly recommended.
More info how to configure a local HTTP proxy:
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5473
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5474
******************************************************************
Environment HTTP proxy: not set
job: htmld=/var/www/lighttpd
job: unpack exitcode=0
Could not find a local HTTP proxy
CVMFS and Frontier will have to use DIRECT connections
This makes the application less efficient
It also puts higher load on the project servers
Setting up a local HTTP proxy is highly recommended
Advice can be found in the project forum
Using custom CVMFS.
Probing CVMFS repositories ...
Probing /cvmfs/alice.cern.ch... OK
Probing /cvmfs/cvmfs-config.cern.ch... OK
Probing /cvmfs/grid.cern.ch... OK
Probing /cvmfs/sft.cern.ch... OK
Excerpt from "cvmfs_config stat":
VERSION   HOST                           PROXY
2.13.3.0  http://s1ral-cvmfs.openhtc.io  DIRECT
******************************************************************
                        IMPORTANT HINT(S)!
******************************************************************
CVMFS server: http://s1ral-cvmfs.openhtc.io
CVMFS proxy:  DIRECT
No local HTTP proxy found.
With this setup concurrently running containers can't share
a common CVMFS cache. A local HTTP proxy is therefore
highly recommended.
More info how to configure a local HTTP proxy:
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5473
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5474
******************************************************************
Environment HTTP proxy: not set
job: htmld=/var/www/lighttpd
job: unpack exitcode=0
Could not find a local HTTP proxy
CVMFS and Frontier will have to use DIRECT connections
This makes the application less efficient
It also puts higher load on the project servers
Setting up a local HTTP proxy is highly recommended
Advice can be found in the project forum
Using custom CVMFS.
Probing CVMFS repositories ...
Probing /cvmfs/alice.cern.ch... OK
Probing /cvmfs/cvmfs-config.cern.ch... OK
Probing /cvmfs/grid.cern.ch... OK
Probing /cvmfs/sft.cern.ch... OK
Excerpt from "cvmfs_config stat":
VERSION   HOST                           PROXY
2.13.3.0  http://s1ral-cvmfs.openhtc.io  DIRECT
******************************************************************
                        IMPORTANT HINT(S)!
******************************************************************
CVMFS server: http://s1ral-cvmfs.openhtc.io
CVMFS proxy:  DIRECT
No local HTTP proxy found.
With this setup concurrently running containers can't share
a common CVMFS cache. A local HTTP proxy is therefore
highly recommended.
More info how to configure a local HTTP proxy:
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5473
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5474
******************************************************************
Environment HTTP proxy: not set
job: htmld=/var/www/lighttpd
job: unpack exitcode=0
Could not find a local HTTP proxy
CVMFS and Frontier will have to use DIRECT connections
This makes the application less efficient
It also puts higher load on the project servers
Setting up a local HTTP proxy is highly recommended
Advice can be found in the project forum
Using custom CVMFS.
Probing CVMFS repositories ...
Probing /cvmfs/alice.cern.ch... OK
Probing /cvmfs/cvmfs-config.cern.ch... OK
Probing /cvmfs/grid.cern.ch... OK
Probing /cvmfs/sft.cern.ch... OK
Excerpt from "cvmfs_config stat":
VERSION   HOST                           PROXY
2.13.3.0  http://s1ral-cvmfs.openhtc.io  DIRECT
******************************************************************
                        IMPORTANT HINT(S)!
******************************************************************
CVMFS server: http://s1ral-cvmfs.openhtc.io
CVMFS proxy:  DIRECT
No local HTTP proxy found.
With this setup concurrently running containers can't share
a common CVMFS cache. A local HTTP proxy is therefore
highly recommended.
More info how to configure a local HTTP proxy:
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5473
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5474
******************************************************************
Environment HTTP proxy: not set
job: htmld=/var/www/lighttpd
job: unpack exitcode=0
Could not find a local HTTP proxy
CVMFS and Frontier will have to use DIRECT connections
This makes the application less efficient
It also puts higher load on the project servers
Setting up a local HTTP proxy is highly recommended
Advice can be found in the project forum
Using custom CVMFS.
Probing CVMFS repositories ...
Probing /cvmfs/alice.cern.ch... OK
Probing /cvmfs/cvmfs-config.cern.ch... OK
Probing /cvmfs/grid.cern.ch... OK
Probing /cvmfs/sft.cern.ch... OK
Excerpt from "cvmfs_config stat":
VERSION   HOST                           PROXY
2.13.3.0  http://s1ral-cvmfs.openhtc.io  DIRECT
******************************************************************
                        IMPORTANT HINT(S)!
******************************************************************
CVMFS server: http://s1ral-cvmfs.openhtc.io
CVMFS proxy:  DIRECT
No local HTTP proxy found.
With this setup concurrently running containers can't share
a common CVMFS cache. A local HTTP proxy is therefore
highly recommended.
More info how to configure a local HTTP proxy:
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5473
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5474
******************************************************************
Environment HTTP proxy: not set
job: htmld=/var/www/lighttpd
job: unpack exitcode=0
Could not find a local HTTP proxy
CVMFS and Frontier will have to use DIRECT connections
This makes the application less efficient
It also puts higher load on the project servers
Setting up a local HTTP proxy is highly recommended
Advice can be found in the project forum
Using custom CVMFS.
Probing CVMFS repositories ...
Probing /cvmfs/alice.cern.ch... OK
Probing /cvmfs/cvmfs-config.cern.ch... OK
Probing /cvmfs/grid.cern.ch... OK
Probing /cvmfs/sft.cern.ch... OK
Excerpt from "cvmfs_config stat":
VERSION   HOST                           PROXY
2.13.3.0  http://s1ral-cvmfs.openhtc.io  DIRECT
******************************************************************
                        IMPORTANT HINT(S)!
******************************************************************
CVMFS server: http://s1ral-cvmfs.openhtc.io
CVMFS proxy:  DIRECT
No local HTTP proxy found.
With this setup concurrently running containers can't share
a common CVMFS cache. A local HTTP proxy is therefore
highly recommended.
More info how to configure a local HTTP proxy:
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5473
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5474
******************************************************************
Environment HTTP proxy: not set
job: htmld=/var/www/lighttpd
job: unpack exitcode=0
Could not find a local HTTP proxy
CVMFS and Frontier will have to use DIRECT connections
This makes the application less efficient
It also puts higher load on the project servers
Setting up a local HTTP proxy is highly recommended
Advice can be found in the project forum
Using custom CVMFS.
Probing CVMFS repositories ...
Probing /cvmfs/alice.cern.ch... Failed!
Probing /cvmfs/cvmfs-config.cern.ch... Failed!
Probing /cvmfs/grid.cern.ch... Failed!
Probing /cvmfs/sft.cern.ch... Failed!
Probing CVMFS repositories failed
Filesystem      Used Use% Mounted on
cvmfs2          214K   1% /cvmfs/cvmfs-config.cern.ch
cvmfs2          172M   5% /cvmfs/alice.cern.ch
cvmfs2          106M   3% /cvmfs/grid.cern.ch
cvmfs2          777M  20% /cvmfs/sft.cern.ch
total           1.1G   7% -
boinc_shutdown called with exit code 206
sd_delay: 836
ETA: 2026-04-03 13:14:51 UTC

Could not find a local HTTP proxy
CVMFS and Frontier will have to use DIRECT connections
This makes the application less efficient
It also puts higher load on the project servers
Setting up a local HTTP proxy is highly recommended
Advice can be found in the project forum
Using custom CVMFS.
Probing CVMFS repositories ...
Probing /cvmfs/alice.cern.ch... Failed!
Probing /cvmfs/cvmfs-config.cern.ch... Failed!
Probing /cvmfs/grid.cern.ch... Failed!
Probing /cvmfs/sft.cern.ch... Failed!
Probing CVMFS repositories failed
Filesystem      Used Use% Mounted on
cvmfs2          214K   1% /cvmfs/cvmfs-config.cern.ch
cvmfs2          172M   5% /cvmfs/alice.cern.ch
cvmfs2          106M   3% /cvmfs/grid.cern.ch
cvmfs2          777M  20% /cvmfs/sft.cern.ch
total           1.1G   7% -
boinc_shutdown called with exit code 206
sd_delay: 976
ETA: 2026-04-03 14:10:45 UTC

Could not find a local HTTP proxy
CVMFS and Frontier will have to use DIRECT connections
This makes the application less efficient
It also puts higher load on the project servers
Setting up a local HTTP proxy is highly recommended
Advice can be found in the project forum
Using custom CVMFS.
Probing CVMFS repositories ...
Probing /cvmfs/alice.cern.ch... Failed!
Probing /cvmfs/cvmfs-config.cern.ch... Failed!
Probing /cvmfs/grid.cern.ch... Failed!
Probing /cvmfs/sft.cern.ch... Failed!
Probing CVMFS repositories failed
Filesystem      Used Use% Mounted on
cvmfs2          214K   1% /cvmfs/cvmfs-config.cern.ch
cvmfs2          193M   5% /cvmfs/alice.cern.ch
cvmfs2          121M   4% /cvmfs/grid.cern.ch
cvmfs2          777M  20% /cvmfs/sft.cern.ch
total           1.1G   7% -
boinc_shutdown called with exit code 206
sd_delay: 823
ETA: 2026-04-04 00:10:58 UTC

EOM
stderr from container:
Could not find a local HTTP proxy
CVMFS and Frontier will have to use DIRECT connections
This makes the application less efficient
It also puts higher load on the project servers
Setting up a local HTTP proxy is highly recommended
Advice can be found in the project forum
Using custom CVMFS.
Probing CVMFS repositories ...
Probing /cvmfs/alice.cern.ch... OK
Probing /cvmfs/cvmfs-config.cern.ch... OK
Probing /cvmfs/grid.cern.ch... OK
Probing /cvmfs/sft.cern.ch... OK
Excerpt from "cvmfs_config stat":
VERSION   HOST                           PROXY
2.13.3.0  http://s1ral-cvmfs.openhtc.io  DIRECT
******************************************************************
                        IMPORTANT HINT(S)!
******************************************************************
CVMFS server: http://s1ral-cvmfs.openhtc.io
CVMFS proxy:  DIRECT
No local HTTP proxy found.
With this setup concurrently running containers can't share
a common CVMFS cache. A local HTTP proxy is therefore
highly recommended.
More info how to configure a local HTTP proxy:
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5473
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5474
******************************************************************
Environment HTTP proxy: not set
job: htmld=/var/www/lighttpd
job: unpack exitcode=0
Could not find a local HTTP proxy
CVMFS and Frontier will have to use DIRECT connections
This makes the application less efficient
It also puts higher load on the project servers
Setting up a local HTTP proxy is highly recommended
Advice can be found in the project forum
Using custom CVMFS.
Probing CVMFS repositories ...
Probing /cvmfs/alice.cern.ch... OK
Probing /cvmfs/cvmfs-config.cern.ch... OK
Probing /cvmfs/grid.cern.ch... OK
Probing /cvmfs/sft.cern.ch... OK
Excerpt from "cvmfs_config stat":
VERSION   HOST                           PROXY
2.13.3.0  http://s1ral-cvmfs.openhtc.io  DIRECT
******************************************************************
                        IMPORTANT HINT(S)!
******************************************************************
CVMFS server: http://s1ral-cvmfs.openhtc.io
CVMFS proxy:  DIRECT
No local HTTP proxy found.
With this setup concurrently running containers can't share
a common CVMFS cache. A local HTTP proxy is therefore
highly recommended.
More info how to configure a local HTTP proxy:
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5473
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5474
******************************************************************
Environment HTTP proxy: not set
job: htmld=/var/www/lighttpd
job: unpack exitcode=0
Could not find a local HTTP proxy
CVMFS and Frontier will have to use DIRECT connections
This makes the application less efficient
It also puts higher load on the project servers
Setting up a local HTTP proxy is highly recommended
Advice can be found in the project forum
Using custom CVMFS.
Probing CVMFS repositories ...
Probing /cvmfs/alice.cern.ch... OK
Probing /cvmfs/cvmfs-config.cern.ch... OK
Probing /cvmfs/grid.cern.ch... OK
Probing /cvmfs/sft.cern.ch... OK
Excerpt from "cvmfs_config stat":
VERSION   HOST                           PROXY
2.13.3.0  http://s1ral-cvmfs.openhtc.io  DIRECT
******************************************************************
                        IMPORTANT HINT(S)!
******************************************************************
CVMFS server: http://s1ral-cvmfs.openhtc.io
CVMFS proxy:  DIRECT
No local HTTP proxy found.
With this setup concurrently running containers can't share
a common CVMFS cache. A local HTTP proxy is therefore
highly recommended.
More info how to configure a local HTTP proxy:
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5473
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5474
******************************************************************
Environment HTTP proxy: not set
job: htmld=/var/www/lighttpd
job: unpack exitcode=0
Could not find a local HTTP proxy
CVMFS and Frontier will have to use DIRECT connections
This makes the application less efficient
It also puts higher load on the project servers
Setting up a local HTTP proxy is highly recommended
Advice can be found in the project forum
Using custom CVMFS.
Probing CVMFS repositories ...
Probing /cvmfs/alice.cern.ch... OK
Probing /cvmfs/cvmfs-config.cern.ch... OK
Probing /cvmfs/grid.cern.ch... OK
Probing /cvmfs/sft.cern.ch... OK
Excerpt from "cvmfs_config stat":
VERSION   HOST                           PROXY
2.13.3.0  http://s1ral-cvmfs.openhtc.io  DIRECT
******************************************************************
                        IMPORTANT HINT(S)!
******************************************************************
CVMFS server: http://s1ral-cvmfs.openhtc.io
CVMFS proxy:  DIRECT
No local HTTP proxy found.
With this setup concurrently running containers can't share
a common CVMFS cache. A local HTTP proxy is therefore
highly recommended.
More info how to configure a local HTTP proxy:
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5473
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5474
******************************************************************
Environment HTTP proxy: not set
job: htmld=/var/www/lighttpd
job: unpack exitcode=0
Could not find a local HTTP proxy
CVMFS and Frontier will have to use DIRECT connections
This makes the application less efficient
It also puts higher load on the project servers
Setting up a local HTTP proxy is highly recommended
Advice can be found in the project forum
Using custom CVMFS.
Probing CVMFS repositories ...
Probing /cvmfs/alice.cern.ch... OK
Probing /cvmfs/cvmfs-config.cern.ch... OK
Probing /cvmfs/grid.cern.ch... OK
Probing /cvmfs/sft.cern.ch... OK
Excerpt from "cvmfs_config stat":
VERSION   HOST                           PROXY
2.13.3.0  http://s1ral-cvmfs.openhtc.io  DIRECT
******************************************************************
                        IMPORTANT HINT(S)!
******************************************************************
CVMFS server: http://s1ral-cvmfs.openhtc.io
CVMFS proxy:  DIRECT
No local HTTP proxy found.
With this setup concurrently running containers can't share
a common CVMFS cache. A local HTTP proxy is therefore
highly recommended.
More info how to configure a local HTTP proxy:
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5473
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5474
******************************************************************
Environment HTTP proxy: not set
job: htmld=/var/www/lighttpd
job: unpack exitcode=0
Could not find a local HTTP proxy
CVMFS and Frontier will have to use DIRECT connections
This makes the application less efficient
It also puts higher load on the project servers
Setting up a local HTTP proxy is highly recommended
Advice can be found in the project forum
Using custom CVMFS.
Probing CVMFS repositories ...
Probing /cvmfs/alice.cern.ch... OK
Probing /cvmfs/cvmfs-config.cern.ch... OK
Probing /cvmfs/grid.cern.ch... OK
Probing /cvmfs/sft.cern.ch... OK
Excerpt from "cvmfs_config stat":
VERSION   HOST                           PROXY
2.13.3.0  http://s1ral-cvmfs.openhtc.io  DIRECT
******************************************************************
                        IMPORTANT HINT(S)!
******************************************************************
CVMFS server: http://s1ral-cvmfs.openhtc.io
CVMFS proxy:  DIRECT
No local HTTP proxy found.
With this setup concurrently running containers can't share
a common CVMFS cache. A local HTTP proxy is therefore
highly recommended.
More info how to configure a local HTTP proxy:
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5473
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5474
******************************************************************
Environment HTTP proxy: not set
job: htmld=/var/www/lighttpd
job: unpack exitcode=0
Could not find a local HTTP proxy
CVMFS and Frontier will have to use DIRECT connections
This makes the application less efficient
It also puts higher load on the project servers
Setting up a local HTTP proxy is highly recommended
Advice can be found in the project forum
Using custom CVMFS.
Probing CVMFS repositories ...
Probing /cvmfs/alice.cern.ch... OK
Probing /cvmfs/cvmfs-config.cern.ch... OK
Probing /cvmfs/grid.cern.ch... OK
Probing /cvmfs/sft.cern.ch... OK
Excerpt from "cvmfs_config stat":
VERSION   HOST                           PROXY
2.13.3.0  http://s1ral-cvmfs.openhtc.io  DIRECT
******************************************************************
                        IMPORTANT HINT(S)!
******************************************************************
CVMFS server: http://s1ral-cvmfs.openhtc.io
CVMFS proxy:  DIRECT
No local HTTP proxy found.
With this setup concurrently running containers can't share
a common CVMFS cache. A local HTTP proxy is therefore
highly recommended.
More info how to configure a local HTTP proxy:
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5473
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5474
******************************************************************
Environment HTTP proxy: not set
job: htmld=/var/www/lighttpd
job: unpack exitcode=0
Could not find a local HTTP proxy
CVMFS and Frontier will have to use DIRECT connections
This makes the application less efficient
It also puts higher load on the project servers
Setting up a local HTTP proxy is highly recommended
Advice can be found in the project forum
Using custom CVMFS.
Probing CVMFS repositories ...
Probing /cvmfs/alice.cern.ch... OK
Probing /cvmfs/cvmfs-config.cern.ch... OK
Probing /cvmfs/grid.cern.ch... OK
Probing /cvmfs/sft.cern.ch... OK
Excerpt from "cvmfs_config stat":
VERSION   HOST                           PROXY
2.13.3.0  http://s1ral-cvmfs.openhtc.io  DIRECT
******************************************************************
                        IMPORTANT HINT(S)!
******************************************************************
CVMFS server: http://s1ral-cvmfs.openhtc.io
CVMFS proxy:  DIRECT
No local HTTP proxy found.
With this setup concurrently running containers can't share
a common CVMFS cache. A local HTTP proxy is therefore
highly recommended.
More info how to configure a local HTTP proxy:
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5473
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5474
******************************************************************
Environment HTTP proxy: not set
job: htmld=/var/www/lighttpd
job: unpack exitcode=0
Could not find a local HTTP proxy
CVMFS and Frontier will have to use DIRECT connections
This makes the application less efficient
It also puts higher load on the project servers
Setting up a local HTTP proxy is highly recommended
Advice can be found in the project forum
Using custom CVMFS.
Probing CVMFS repositories ...
Probing /cvmfs/alice.cern.ch... OK
Probing /cvmfs/cvmfs-config.cern.ch... OK
Probing /cvmfs/grid.cern.ch... OK
Probing /cvmfs/sft.cern.ch... OK
Excerpt from "cvmfs_config stat":
VERSION   HOST                           PROXY
2.13.3.0  http://s1ral-cvmfs.openhtc.io  DIRECT
******************************************************************
                        IMPORTANT HINT(S)!
******************************************************************
CVMFS server: http://s1ral-cvmfs.openhtc.io
CVMFS proxy:  DIRECT
No local HTTP proxy found.
With this setup concurrently running containers can't share
a common CVMFS cache. A local HTTP proxy is therefore
highly recommended.
More info how to configure a local HTTP proxy:
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5473
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5474
******************************************************************
Environment HTTP proxy: not set
job: htmld=/var/www/lighttpd
job: unpack exitcode=0
Could not find a local HTTP proxy
CVMFS and Frontier will have to use DIRECT connections
This makes the application less efficient
It also puts higher load on the project servers
Setting up a local HTTP proxy is highly recommended
Advice can be found in the project forum
Using custom CVMFS.
Probing CVMFS repositories ...
Probing /cvmfs/alice.cern.ch... OK
Probing /cvmfs/cvmfs-config.cern.ch... OK
Probing /cvmfs/grid.cern.ch... OK
Probing /cvmfs/sft.cern.ch... OK
Excerpt from "cvmfs_config stat":
VERSION   HOST                           PROXY
2.13.3.0  http://s1ral-cvmfs.openhtc.io  DIRECT
******************************************************************
                        IMPORTANT HINT(S)!
******************************************************************
CVMFS server: http://s1ral-cvmfs.openhtc.io
CVMFS proxy:  DIRECT
No local HTTP proxy found.
With this setup concurrently running containers can't share
a common CVMFS cache. A local HTTP proxy is therefore
highly recommended.
More info how to configure a local HTTP proxy:
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5473
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5474
******************************************************************
Environment HTTP proxy: not set
job: htmld=/var/www/lighttpd
job: unpack exitcode=0
Could not find a local HTTP proxy
CVMFS and Frontier will have to use DIRECT connections
This makes the application less efficient
It also puts higher load on the project servers
Setting up a local HTTP proxy is highly recommended
Advice can be found in the project forum
Using custom CVMFS.
Probing CVMFS repositories ...
Probing /cvmfs/alice.cern.ch... OK
Probing /cvmfs/cvmfs-config.cern.ch... OK
Probing /cvmfs/grid.cern.ch... OK
Probing /cvmfs/sft.cern.ch... OK
Excerpt from "cvmfs_config stat":
VERSION   HOST                           PROXY
2.13.3.0  http://s1ral-cvmfs.openhtc.io  DIRECT
******************************************************************
                        IMPORTANT HINT(S)!
******************************************************************
CVMFS server: http://s1ral-cvmfs.openhtc.io
CVMFS proxy:  DIRECT
No local HTTP proxy found.
With this setup concurrently running containers can't share
a common CVMFS cache. A local HTTP proxy is therefore
highly recommended.
More info how to configure a local HTTP proxy:
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5473
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5474
******************************************************************
Environment HTTP proxy: not set
job: htmld=/var/www/lighttpd
job: unpack exitcode=0
Could not find a local HTTP proxy
CVMFS and Frontier will have to use DIRECT connections
This makes the application less efficient
It also puts higher load on the project servers
Setting up a local HTTP proxy is highly recommended
Advice can be found in the project forum
Using custom CVMFS.
Probing CVMFS repositories ...
Probing /cvmfs/alice.cern.ch... OK
Probing /cvmfs/cvmfs-config.cern.ch... OK
Probing /cvmfs/grid.cern.ch... OK
Probing /cvmfs/sft.cern.ch... OK
Excerpt from "cvmfs_config stat":
VERSION   HOST                           PROXY
2.13.3.0  http://s1ral-cvmfs.openhtc.io  DIRECT
******************************************************************
                        IMPORTANT HINT(S)!
******************************************************************
CVMFS server: http://s1ral-cvmfs.openhtc.io
CVMFS proxy:  DIRECT
No local HTTP proxy found.
With this setup concurrently running containers can't share
a common CVMFS cache. A local HTTP proxy is therefore
highly recommended.
More info how to configure a local HTTP proxy:
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5473
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5474
******************************************************************
Environment HTTP proxy: not set
job: htmld=/var/www/lighttpd
job: unpack exitcode=0
Could not find a local HTTP proxy
CVMFS and Frontier will have to use DIRECT connections
This makes the application less efficient
It also puts higher load on the project servers
Setting up a local HTTP proxy is highly recommended
Advice can be found in the project forum
Using custom CVMFS.
Probing CVMFS repositories ...
Probing /cvmfs/alice.cern.ch... OK
Probing /cvmfs/cvmfs-config.cern.ch... OK
Probing /cvmfs/grid.cern.ch... OK
Probing /cvmfs/sft.cern.ch... OK
Excerpt from "cvmfs_config stat":
VERSION   HOST                           PROXY
2.13.3.0  http://s1ral-cvmfs.openhtc.io  DIRECT
******************************************************************
                        IMPORTANT HINT(S)!
******************************************************************
CVMFS server: http://s1ral-cvmfs.openhtc.io
CVMFS proxy:  DIRECT
No local HTTP proxy found.
With this setup concurrently running containers can't share
a common CVMFS cache. A local HTTP proxy is therefore
highly recommended.
More info how to configure a local HTTP proxy:
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5473
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5474
******************************************************************
Environment HTTP proxy: not set
job: htmld=/var/www/lighttpd
job: unpack exitcode=0
Could not find a local HTTP proxy
CVMFS and Frontier will have to use DIRECT connections
This makes the application less efficient
It also puts higher load on the project servers
Setting up a local HTTP proxy is highly recommended
Advice can be found in the project forum
Using custom CVMFS.
Probing CVMFS repositories ...
Probing /cvmfs/alice.cern.ch... OK
Probing /cvmfs/cvmfs-config.cern.ch... OK
Probing /cvmfs/grid.cern.ch... OK
Probing /cvmfs/sft.cern.ch... OK
Excerpt from "cvmfs_config stat":
VERSION   HOST                           PROXY
2.13.3.0  http://s1ral-cvmfs.openhtc.io  DIRECT
******************************************************************
                        IMPORTANT HINT(S)!
******************************************************************
CVMFS server: http://s1ral-cvmfs.openhtc.io
CVMFS proxy:  DIRECT
No local HTTP proxy found.
With this setup concurrently running containers can't share
a common CVMFS cache. A local HTTP proxy is therefore
highly recommended.
More info how to configure a local HTTP proxy:
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5473
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5474
******************************************************************
Environment HTTP proxy: not set
job: htmld=/var/www/lighttpd
job: unpack exitcode=0
Could not find a local HTTP proxy
CVMFS and Frontier will have to use DIRECT connections
This makes the application less efficient
It also puts higher load on the project servers
Setting up a local HTTP proxy is highly recommended
Advice can be found in the project forum
Using custom CVMFS.
Probing CVMFS repositories ...
Probing /cvmfs/alice.cern.ch... OK
Probing /cvmfs/cvmfs-config.cern.ch... OK
Probing /cvmfs/grid.cern.ch... OK
Probing /cvmfs/sft.cern.ch... OK
Excerpt from "cvmfs_config stat":
VERSION   HOST                           PROXY
2.13.3.0  http://s1ral-cvmfs.openhtc.io  DIRECT
******************************************************************
                        IMPORTANT HINT(S)!
******************************************************************
CVMFS server: http://s1ral-cvmfs.openhtc.io
CVMFS proxy:  DIRECT
No local HTTP proxy found.
With this setup concurrently running containers can't share
a common CVMFS cache. A local HTTP proxy is therefore
highly recommended.
More info how to configure a local HTTP proxy:
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5473
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5474
******************************************************************
Environment HTTP proxy: not set
job: htmld=/var/www/lighttpd
job: unpack exitcode=0
Could not find a local HTTP proxy
CVMFS and Frontier will have to use DIRECT connections
This makes the application less efficient
It also puts higher load on the project servers
Setting up a local HTTP proxy is highly recommended
Advice can be found in the project forum
Using custom CVMFS.
Probing CVMFS repositories ...
Probing /cvmfs/alice.cern.ch... OK
Probing /cvmfs/cvmfs-config.cern.ch... OK
Probing /cvmfs/grid.cern.ch... OK
Probing /cvmfs/sft.cern.ch... OK
Excerpt from "cvmfs_config stat":
VERSION   HOST                           PROXY
2.13.3.0  http://s1ral-cvmfs.openhtc.io  DIRECT
******************************************************************
                        IMPORTANT HINT(S)!
******************************************************************
CVMFS server: http://s1ral-cvmfs.openhtc.io
CVMFS proxy:  DIRECT
No local HTTP proxy found.
With this setup concurrently running containers can't share
a common CVMFS cache. A local HTTP proxy is therefore
highly recommended.
More info how to configure a local HTTP proxy:
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5473
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5474
******************************************************************
Environment HTTP proxy: not set
job: htmld=/var/www/lighttpd
job: unpack exitcode=0
Could not find a local HTTP proxy
CVMFS and Frontier will have to use DIRECT connections
This makes the application less efficient
It also puts higher load on the project servers
Setting up a local HTTP proxy is highly recommended
Advice can be found in the project forum
Using custom CVMFS.
Probing CVMFS repositories ...
Probing /cvmfs/alice.cern.ch... OK
Probing /cvmfs/cvmfs-config.cern.ch... OK
Probing /cvmfs/grid.cern.ch... OK
Probing /cvmfs/sft.cern.ch... OK
Excerpt from "cvmfs_config stat":
VERSION   HOST                           PROXY
2.13.3.0  http://s1ral-cvmfs.openhtc.io  DIRECT
******************************************************************
                        IMPORTANT HINT(S)!
******************************************************************
CVMFS server: http://s1ral-cvmfs.openhtc.io
CVMFS proxy:  DIRECT
No local HTTP proxy found.
With this setup concurrently running containers can't share
a common CVMFS cache. A local HTTP proxy is therefore
highly recommended.
More info how to configure a local HTTP proxy:
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5473
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5474
******************************************************************
Environment HTTP proxy: not set
job: htmld=/var/www/lighttpd
job: unpack exitcode=0
Could not find a local HTTP proxy
CVMFS and Frontier will have to use DIRECT connections
This makes the application less efficient
It also puts higher load on the project servers
Setting up a local HTTP proxy is highly recommended
Advice can be found in the project forum
Using custom CVMFS.
Probing CVMFS repositories ...
Probing /cvmfs/alice.cern.ch... OK
Probing /cvmfs/cvmfs-config.cern.ch... OK
Probing /cvmfs/grid.cern.ch... OK
Probing /cvmfs/sft.cern.ch... OK
Excerpt from "cvmfs_config stat":
VERSION   HOST                           PROXY
2.13.3.0  http://s1ral-cvmfs.openhtc.io  DIRECT
******************************************************************
                        IMPORTANT HINT(S)!
******************************************************************
CVMFS server: http://s1ral-cvmfs.openhtc.io
CVMFS proxy:  DIRECT
No local HTTP proxy found.
With this setup concurrently running containers can't share
a common CVMFS cache. A local HTTP proxy is therefore
highly recommended.
More info how to configure a local HTTP proxy:
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5473
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5474
******************************************************************
Environment HTTP proxy: not set
job: htmld=/var/www/lighttpd
job: unpack exitcode=0
Could not find a local HTTP proxy
CVMFS and Frontier will have to use DIRECT connections
This makes the application less efficient
It also puts higher load on the project servers
Setting up a local HTTP proxy is highly recommended
Advice can be found in the project forum
Using custom CVMFS.
Probing CVMFS repositories ...
Probing /cvmfs/alice.cern.ch... OK
Probing /cvmfs/cvmfs-config.cern.ch... OK
Probing /cvmfs/grid.cern.ch... OK
Probing /cvmfs/sft.cern.ch... OK
Excerpt from "cvmfs_config stat":
VERSION   HOST                           PROXY
2.13.3.0  http://s1ral-cvmfs.openhtc.io  DIRECT
******************************************************************
                        IMPORTANT HINT(S)!
******************************************************************
CVMFS server: http://s1ral-cvmfs.openhtc.io
CVMFS proxy:  DIRECT
No local HTTP proxy found.
With this setup concurrently running containers can't share
a common CVMFS cache. A local HTTP proxy is therefore
highly recommended.
More info how to configure a local HTTP proxy:
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5473
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5474
******************************************************************
Environment HTTP proxy: not set
job: htmld=/var/www/lighttpd
job: unpack exitcode=0
Could not find a local HTTP proxy
CVMFS and Frontier will have to use DIRECT connections
This makes the application less efficient
It also puts higher load on the project servers
Setting up a local HTTP proxy is highly recommended
Advice can be found in the project forum
Using custom CVMFS.
Probing CVMFS repositories ...
Probing /cvmfs/alice.cern.ch... OK
Probing /cvmfs/cvmfs-config.cern.ch... OK
Probing /cvmfs/grid.cern.ch... OK
Probing /cvmfs/sft.cern.ch... OK
Excerpt from "cvmfs_config stat":
VERSION   HOST                           PROXY
2.13.3.0  http://s1ral-cvmfs.openhtc.io  DIRECT
******************************************************************
                        IMPORTANT HINT(S)!
******************************************************************
CVMFS server: http://s1ral-cvmfs.openhtc.io
CVMFS proxy:  DIRECT
No local HTTP proxy found.
With this setup concurrently running containers can't share
a common CVMFS cache. A local HTTP proxy is therefore
highly recommended.
More info how to configure a local HTTP proxy:
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5473
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5474
******************************************************************
Environment HTTP proxy: not set
job: htmld=/var/www/lighttpd
job: unpack exitcode=0
Could not find a local HTTP proxy
CVMFS and Frontier will have to use DIRECT connections
This makes the application less efficient
It also puts higher load on the project servers
Setting up a local HTTP proxy is highly recommended
Advice can be found in the project forum
Using custom CVMFS.
Probing CVMFS repositories ...
Probing /cvmfs/alice.cern.ch... OK
Probing /cvmfs/cvmfs-config.cern.ch... OK
Probing /cvmfs/grid.cern.ch... OK
Probing /cvmfs/sft.cern.ch... OK
Excerpt from "cvmfs_config stat":
VERSION   HOST                           PROXY
2.13.3.0  http://s1ral-cvmfs.openhtc.io  DIRECT
******************************************************************
                        IMPORTANT HINT(S)!
******************************************************************
CVMFS server: http://s1ral-cvmfs.openhtc.io
CVMFS proxy:  DIRECT
No local HTTP proxy found.
With this setup concurrently running containers can't share
a common CVMFS cache. A local HTTP proxy is therefore
highly recommended.
More info how to configure a local HTTP proxy:
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5473
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5474
******************************************************************
Environment HTTP proxy: not set
job: htmld=/var/www/lighttpd
job: unpack exitcode=0
Could not find a local HTTP proxy
CVMFS and Frontier will have to use DIRECT connections
This makes the application less efficient
It also puts higher load on the project servers
Setting up a local HTTP proxy is highly recommended
Advice can be found in the project forum
Using custom CVMFS.
Probing CVMFS repositories ...
Probing /cvmfs/alice.cern.ch... OK
Probing /cvmfs/cvmfs-config.cern.ch... OK
Probing /cvmfs/grid.cern.ch... OK
Probing /cvmfs/sft.cern.ch... OK
Excerpt from "cvmfs_config stat":
VERSION   HOST                           PROXY
2.13.3.0  http://s1ral-cvmfs.openhtc.io  DIRECT
******************************************************************
                        IMPORTANT HINT(S)!
******************************************************************
CVMFS server: http://s1ral-cvmfs.openhtc.io
CVMFS proxy:  DIRECT
No local HTTP proxy found.
With this setup concurrently running containers can't share
a common CVMFS cache. A local HTTP proxy is therefore
highly recommended.
More info how to configure a local HTTP proxy:
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5473
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5474
******************************************************************
Environment HTTP proxy: not set
job: htmld=/var/www/lighttpd
job: unpack exitcode=0
Could not find a local HTTP proxy
CVMFS and Frontier will have to use DIRECT connections
This makes the application less efficient
It also puts higher load on the project servers
Setting up a local HTTP proxy is highly recommended
Advice can be found in the project forum
Using custom CVMFS.
Probing CVMFS repositories ...
Probing /cvmfs/alice.cern.ch... OK
Probing /cvmfs/cvmfs-config.cern.ch... OK
Probing /cvmfs/grid.cern.ch... OK
Probing /cvmfs/sft.cern.ch... OK
Excerpt from "cvmfs_config stat":
VERSION   HOST                           PROXY
2.13.3.0  http://s1ral-cvmfs.openhtc.io  DIRECT
******************************************************************
                        IMPORTANT HINT(S)!
******************************************************************
CVMFS server: http://s1ral-cvmfs.openhtc.io
CVMFS proxy:  DIRECT
No local HTTP proxy found.
With this setup concurrently running containers can't share
a common CVMFS cache. A local HTTP proxy is therefore
highly recommended.
More info how to configure a local HTTP proxy:
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5473
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5474
******************************************************************
Environment HTTP proxy: not set
job: htmld=/var/www/lighttpd
job: unpack exitcode=0
Could not find a local HTTP proxy
CVMFS and Frontier will have to use DIRECT connections
This makes the application less efficient
It also puts higher load on the project servers
Setting up a local HTTP proxy is highly recommended
Advice can be found in the project forum
Using custom CVMFS.
Probing CVMFS repositories ...
Probing /cvmfs/alice.cern.ch... OK
Probing /cvmfs/cvmfs-config.cern.ch... OK
Probing /cvmfs/grid.cern.ch... OK
Probing /cvmfs/sft.cern.ch... OK
Excerpt from "cvmfs_config stat":
VERSION   HOST                           PROXY
2.13.3.0  http://s1ral-cvmfs.openhtc.io  DIRECT
******************************************************************
                        IMPORTANT HINT(S)!
******************************************************************
CVMFS server: http://s1ral-cvmfs.openhtc.io
CVMFS proxy:  DIRECT
No local HTTP proxy found.
With this setup concurrently running containers can't share
a common CVMFS cache. A local HTTP proxy is therefore
highly recommended.
More info how to configure a local HTTP proxy:
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5473
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5474
******************************************************************
Environment HTTP proxy: not set
job: htmld=/var/www/lighttpd
job: unpack exitcode=0
Could not find a local HTTP proxy
CVMFS and Frontier will have to use DIRECT connections
This makes the application less efficient
It also puts higher load on the project servers
Setting up a local HTTP proxy is highly recommended
Advice can be found in the project forum
Using custom CVMFS.
Probing CVMFS repositories ...
Probing /cvmfs/alice.cern.ch... OK
Probing /cvmfs/cvmfs-config.cern.ch... OK
Probing /cvmfs/grid.cern.ch... OK
Probing /cvmfs/sft.cern.ch... OK
Excerpt from "cvmfs_config stat":
VERSION   HOST                           PROXY
2.13.3.0  http://s1ral-cvmfs.openhtc.io  DIRECT
******************************************************************
                        IMPORTANT HINT(S)!
******************************************************************
CVMFS server: http://s1ral-cvmfs.openhtc.io
CVMFS proxy:  DIRECT
No local HTTP proxy found.
With this setup concurrently running containers can't share
a common CVMFS cache. A local HTTP proxy is therefore
highly recommended.
More info how to configure a local HTTP proxy:
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5473
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5474
******************************************************************
Environment HTTP proxy: not set
job: htmld=/var/www/lighttpd
job: unpack exitcode=0
Could not find a local HTTP proxy
CVMFS and Frontier will have to use DIRECT connections
This makes the application less efficient
It also puts higher load on the project servers
Setting up a local HTTP proxy is highly recommended
Advice can be found in the project forum
Using custom CVMFS.
Probing CVMFS repositories ...
Probing /cvmfs/alice.cern.ch... OK
Probing /cvmfs/cvmfs-config.cern.ch... OK
Probing /cvmfs/grid.cern.ch... OK
Probing /cvmfs/sft.cern.ch... OK
Excerpt from "cvmfs_config stat":
VERSION   HOST                           PROXY
2.13.3.0  http://s1ral-cvmfs.openhtc.io  DIRECT
******************************************************************
                        IMPORTANT HINT(S)!
******************************************************************
CVMFS server: http://s1ral-cvmfs.openhtc.io
CVMFS proxy:  DIRECT
No local HTTP proxy found.
With this setup concurrently running containers can't share
a common CVMFS cache. A local HTTP proxy is therefore
highly recommended.
More info how to configure a local HTTP proxy:
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5473
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5474
******************************************************************
Environment HTTP proxy: not set
job: htmld=/var/www/lighttpd
job: unpack exitcode=0
Could not find a local HTTP proxy
CVMFS and Frontier will have to use DIRECT connections
This makes the application less efficient
It also puts higher load on the project servers
Setting up a local HTTP proxy is highly recommended
Advice can be found in the project forum
Using custom CVMFS.
Probing CVMFS repositories ...
Probing /cvmfs/alice.cern.ch... OK
Probing /cvmfs/cvmfs-config.cern.ch... OK
Probing /cvmfs/grid.cern.ch... OK
Probing /cvmfs/sft.cern.ch... OK
Excerpt from "cvmfs_config stat":
VERSION   HOST                           PROXY
2.13.3.0  http://s1ral-cvmfs.openhtc.io  DIRECT
******************************************************************
                        IMPORTANT HINT(S)!
******************************************************************
CVMFS server: http://s1ral-cvmfs.openhtc.io
CVMFS proxy:  DIRECT
No local HTTP proxy found.
With this setup concurrently running containers can't share
a common CVMFS cache. A local HTTP proxy is therefore
highly recommended.
More info how to configure a local HTTP proxy:
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5473
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5474
******************************************************************
Environment HTTP proxy: not set
job: htmld=/var/www/lighttpd
job: unpack exitcode=0
Could not find a local HTTP proxy
CVMFS and Frontier will have to use DIRECT connections
This makes the application less efficient
It also puts higher load on the project servers
Setting up a local HTTP proxy is highly recommended
Advice can be found in the project forum
Using custom CVMFS.
Probing CVMFS repositories ...
Probing /cvmfs/alice.cern.ch... OK
Probing /cvmfs/cvmfs-config.cern.ch... OK
Probing /cvmfs/grid.cern.ch... OK
Probing /cvmfs/sft.cern.ch... OK
Excerpt from "cvmfs_config stat":
VERSION   HOST                           PROXY
2.13.3.0  http://s1ral-cvmfs.openhtc.io  DIRECT
******************************************************************
                        IMPORTANT HINT(S)!
******************************************************************
CVMFS server: http://s1ral-cvmfs.openhtc.io
CVMFS proxy:  DIRECT
No local HTTP proxy found.
With this setup concurrently running containers can't share
a common CVMFS cache. A local HTTP proxy is therefore
highly recommended.
More info how to configure a local HTTP proxy:
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5473
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5474
******************************************************************
Environment HTTP proxy: not set
job: htmld=/var/www/lighttpd
job: unpack exitcode=0
Could not find a local HTTP proxy
CVMFS and Frontier will have to use DIRECT connections
This makes the application less efficient
It also puts higher load on the project servers
Setting up a local HTTP proxy is highly recommended
Advice can be found in the project forum
Using custom CVMFS.
Probing CVMFS repositories ...
Probing /cvmfs/alice.cern.ch... OK
Probing /cvmfs/cvmfs-config.cern.ch... OK
Probing /cvmfs/grid.cern.ch... OK
Probing /cvmfs/sft.cern.ch... OK
Excerpt from "cvmfs_config stat":
VERSION   HOST                           PROXY
2.13.3.0  http://s1ral-cvmfs.openhtc.io  DIRECT
******************************************************************
                        IMPORTANT HINT(S)!
******************************************************************
CVMFS server: http://s1ral-cvmfs.openhtc.io
CVMFS proxy:  DIRECT
No local HTTP proxy found.
With this setup concurrently running containers can't share
a common CVMFS cache. A local HTTP proxy is therefore
highly recommended.
More info how to configure a local HTTP proxy:
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5473
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5474
******************************************************************
Environment HTTP proxy: not set
job: htmld=/var/www/lighttpd
job: unpack exitcode=0
Could not find a local HTTP proxy
CVMFS and Frontier will have to use DIRECT connections
This makes the application less efficient
It also puts higher load on the project servers
Setting up a local HTTP proxy is highly recommended
Advice can be found in the project forum
Using custom CVMFS.
Probing CVMFS repositories ...
Probing /cvmfs/alice.cern.ch... OK
Probing /cvmfs/cvmfs-config.cern.ch... OK
Probing /cvmfs/grid.cern.ch... OK
Probing /cvmfs/sft.cern.ch... OK
Excerpt from "cvmfs_config stat":
VERSION   HOST                           PROXY
2.13.3.0  http://s1ral-cvmfs.openhtc.io  DIRECT
******************************************************************
                        IMPORTANT HINT(S)!
******************************************************************
CVMFS server: http://s1ral-cvmfs.openhtc.io
CVMFS proxy:  DIRECT
No local HTTP proxy found.
With this setup concurrently running containers can't share
a common CVMFS cache. A local HTTP proxy is therefore
highly recommended.
More info how to configure a local HTTP proxy:
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5473
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5474
******************************************************************
Environment HTTP proxy: not set
job: htmld=/var/www/lighttpd
job: unpack exitcode=0
Could not find a local HTTP proxy
CVMFS and Frontier will have to use DIRECT connections
This makes the application less efficient
It also puts higher load on the project servers
Setting up a local HTTP proxy is highly recommended
Advice can be found in the project forum
Using custom CVMFS.
Probing CVMFS repositories ...
Probing /cvmfs/alice.cern.ch... OK
Probing /cvmfs/cvmfs-config.cern.ch... OK
Probing /cvmfs/grid.cern.ch... OK
Probing /cvmfs/sft.cern.ch... OK
Excerpt from "cvmfs_config stat":
VERSION   HOST                           PROXY
2.13.3.0  http://s1ral-cvmfs.openhtc.io  DIRECT
******************************************************************
                        IMPORTANT HINT(S)!
******************************************************************
CVMFS server: http://s1ral-cvmfs.openhtc.io
CVMFS proxy:  DIRECT
No local HTTP proxy found.
With this setup concurrently running containers can't share
a common CVMFS cache. A local HTTP proxy is therefore
highly recommended.
More info how to configure a local HTTP proxy:
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5473
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5474
******************************************************************
Environment HTTP proxy: not set
job: htmld=/var/www/lighttpd
job: unpack exitcode=0
Could not find a local HTTP proxy
CVMFS and Frontier will have to use DIRECT connections
This makes the application less efficient
It also puts higher load on the project servers
Setting up a local HTTP proxy is highly recommended
Advice can be found in the project forum
Using custom CVMFS.
Probing CVMFS repositories ...
Probing /cvmfs/alice.cern.ch... OK
Probing /cvmfs/cvmfs-config.cern.ch... OK
Probing /cvmfs/grid.cern.ch... OK
Probing /cvmfs/sft.cern.ch... OK
Excerpt from "cvmfs_config stat":
VERSION   HOST                           PROXY
2.13.3.0  http://s1ral-cvmfs.openhtc.io  DIRECT
******************************************************************
                        IMPORTANT HINT(S)!
******************************************************************
CVMFS server: http://s1ral-cvmfs.openhtc.io
CVMFS proxy:  DIRECT
No local HTTP proxy found.
With this setup concurrently running containers can't share
a common CVMFS cache. A local HTTP proxy is therefore
highly recommended.
More info how to configure a local HTTP proxy:
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5473
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5474
******************************************************************
Environment HTTP proxy: not set
job: htmld=/var/www/lighttpd
job: unpack exitcode=0
Could not find a local HTTP proxy
CVMFS and Frontier will have to use DIRECT connections
This makes the application less efficient
It also puts higher load on the project servers
Setting up a local HTTP proxy is highly recommended
Advice can be found in the project forum
Using custom CVMFS.
Probing CVMFS repositories ...
Probing /cvmfs/alice.cern.ch... OK
Probing /cvmfs/cvmfs-config.cern.ch... OK
Probing /cvmfs/grid.cern.ch... OK
Probing /cvmfs/sft.cern.ch... OK
Excerpt from "cvmfs_config stat":
VERSION   HOST                           PROXY
2.13.3.0  http://s1ral-cvmfs.openhtc.io  DIRECT
******************************************************************
                        IMPORTANT HINT(S)!
******************************************************************
CVMFS server: http://s1ral-cvmfs.openhtc.io
CVMFS proxy:  DIRECT
No local HTTP proxy found.
With this setup concurrently running containers can't share
a common CVMFS cache. A local HTTP proxy is therefore
highly recommended.
More info how to configure a local HTTP proxy:
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5473
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5474
******************************************************************
Environment HTTP proxy: not set
job: htmld=/var/www/lighttpd
job: unpack exitcode=0
Could not find a local HTTP proxy
CVMFS and Frontier will have to use DIRECT connections
This makes the application less efficient
It also puts higher load on the project servers
Setting up a local HTTP proxy is highly recommended
Advice can be found in the project forum
Using custom CVMFS.
Probing CVMFS repositories ...
Probing /cvmfs/alice.cern.ch... OK
Probing /cvmfs/cvmfs-config.cern.ch... OK
Probing /cvmfs/grid.cern.ch... OK
Probing /cvmfs/sft.cern.ch... OK
Excerpt from "cvmfs_config stat":
VERSION   HOST                           PROXY
2.13.3.0  http://s1ral-cvmfs.openhtc.io  DIRECT
******************************************************************
                        IMPORTANT HINT(S)!
******************************************************************
CVMFS server: http://s1ral-cvmfs.openhtc.io
CVMFS proxy:  DIRECT
No local HTTP proxy found.
With this setup concurrently running containers can't share
a common CVMFS cache. A local HTTP proxy is therefore
highly recommended.
More info how to configure a local HTTP proxy:
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5473
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5474
******************************************************************
Environment HTTP proxy: not set
job: htmld=/var/www/lighttpd
job: unpack exitcode=0
Could not find a local HTTP proxy
CVMFS and Frontier will have to use DIRECT connections
This makes the application less efficient
It also puts higher load on the project servers
Setting up a local HTTP proxy is highly recommended
Advice can be found in the project forum
Using custom CVMFS.
Probing CVMFS repositories ...
Probing /cvmfs/alice.cern.ch... Failed!
Probing /cvmfs/cvmfs-config.cern.ch... Failed!
Probing /cvmfs/grid.cern.ch... Failed!
Probing /cvmfs/sft.cern.ch... Failed!
Probing CVMFS repositories failed
Filesystem      Used Use% Mounted on
cvmfs2          214K   1% /cvmfs/cvmfs-config.cern.ch
cvmfs2          172M   5% /cvmfs/alice.cern.ch
cvmfs2          106M   3% /cvmfs/grid.cern.ch
cvmfs2          777M  20% /cvmfs/sft.cern.ch
total           1.1G   7% -
boinc_shutdown called with exit code 206
sd_delay: 836
ETA: 2026-04-03 13:14:51 UTC

Could not find a local HTTP proxy
CVMFS and Frontier will have to use DIRECT connections
This makes the application less efficient
It also puts higher load on the project servers
Setting up a local HTTP proxy is highly recommended
Advice can be found in the project forum
Using custom CVMFS.
Probing CVMFS repositories ...
Probing /cvmfs/alice.cern.ch... Failed!
Probing /cvmfs/cvmfs-config.cern.ch... Failed!
Probing /cvmfs/grid.cern.ch... Failed!
Probing /cvmfs/sft.cern.ch... Failed!
Probing CVMFS repositories failed
Filesystem      Used Use% Mounted on
cvmfs2          214K   1% /cvmfs/cvmfs-config.cern.ch
cvmfs2          172M   5% /cvmfs/alice.cern.ch
cvmfs2          106M   3% /cvmfs/grid.cern.ch
cvmfs2          777M  20% /cvmfs/sft.cern.ch
total           1.1G   7% -
boinc_shutdown called with exit code 206
sd_delay: 976
ETA: 2026-04-03 14:10:45 UTC

Could not find a local HTTP proxy
CVMFS and Frontier will have to use DIRECT connections
This makes the application less efficient
It also puts higher load on the project servers
Setting up a local HTTP proxy is highly recommended
Advice can be found in the project forum
Using custom CVMFS.
Probing CVMFS repositories ...
Probing /cvmfs/alice.cern.ch... Failed!
Probing /cvmfs/cvmfs-config.cern.ch... Failed!
Probing /cvmfs/grid.cern.ch... Failed!
Probing /cvmfs/sft.cern.ch... Failed!
Probing CVMFS repositories failed
Filesystem      Used Use% Mounted on
cvmfs2          214K   1% /cvmfs/cvmfs-config.cern.ch
cvmfs2          193M   5% /cvmfs/alice.cern.ch
cvmfs2          121M   4% /cvmfs/grid.cern.ch
cvmfs2          777M  20% /cvmfs/sft.cern.ch
total           1.1G   7% -
boinc_shutdown called with exit code 206
sd_delay: 823
ETA: 2026-04-04 00:10:58 UTC

EOM
stderr end
running docker command: container rm boinc__lhcathome.cern.ch_lhcathome__theory_2922-4790405-742_1
program: podman
command output:
boinc__lhcathome.cern.ch_lhcathome__theory_2922-4790405-742_1
EOM
running docker command: image rm boinc__lhcathome.cern.ch_lhcathome__theory_2922-4790405-742
program: podman
command output:
Untagged: localhost/boinc__lhcathome.cern.ch_lhcathome__theory_2922-4790405-742:latest
EOM
2026-04-04 01:11:06 (12136): called boinc_finish(206)

</stderr_txt>
]]>


©2026 CERN