| Name | Theory_2922-4855879-682_0 |
| Workunit | 239347669 |
| Created | 23 Feb 2026, 16:22:40 UTC |
| Sent | 24 Feb 2026, 1:05:55 UTC |
| Report deadline | 7 Mar 2026, 1:05:55 UTC |
| Received | 26 Feb 2026, 0:56:26 UTC |
| Server state | Over |
| Outcome | Computation error |
| Client state | Compute error |
| Exit status | 206 (0x000000CE) EXIT_INIT_FAILURE |
| Computer ID | 10870139 |
| Run time | 1 days 12 hours 5 min 50 sec |
| CPU time | 1 days 12 hours 5 min 50 sec |
| Priority | 0 |
| Validate state | Invalid |
| Credit | 0.00 |
| Device peak FLOPS | 5.82 GFLOPS |
| Application version | Theory Simulation v302.10 (docker) windows_x86_64 |
| Peak working set size | 13.53 MB |
| Peak swap size | 2.64 MB |
| Peak disk usage | 10.58 MB |
Stderr output
<core_client_version>8.2.4</core_client_version>
<![CDATA[
<message>
N�zev nebo p��pona souboru je p��li� dlouh�.
(0xce) - exit code 206 (0xce)</message>
<stderr_txt>
lhchomeproxy.{cern.ch|fnal.gov}
Could not find a local HTTP proxy
CVMFS and Frontier will have to use DIRECT connections
This makes the application less efficient
It also puts higher load on the project servers
Setting up a local HTTP proxy is highly recommended
Advice can be found in the project forum
Using custom CVMFS.
Probing CVMFS repositories ...
Probing /cvmfs/alice.cern.ch... OK
Probing /cvmfs/cvmfs-config.cern.ch... OK
Probing /cvmfs/grid.cern.ch... OK
Probing /cvmfs/sft.cern.ch... OK
Excerpt from "cvmfs_config stat":
VERSION HOST PROXY
2.13.3.0 http://s1cern-cvmfs.openhtc.io DIRECT
******************************************************************
IMPORTANT HINT(S)!
******************************************************************
CVMFS server: http://s1cern-cvmfs.openhtc.io
CVMFS proxy: DIRECT
No local HTTP proxy found.
With this setup concurrently running containers can't share
a common CVMFS cache. A local HTTP proxy is therefore
highly recommended.
More info how to configure a local HTTP proxy:
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5473
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5474
******************************************************************
Environment HTTP proxy: not set
job: htmld=/var/www/lighttpd
job: unpack exitcode=0
Could not download a wpad.dat from lhchomeproxy.{cern.ch|fnal.gov}
Could not find a local HTTP proxy
CVMFS and Frontier will have to use DIRECT connections
This makes the application less efficient
It also puts higher load on the project servers
Setting up a local HTTP proxy is highly recommended
Advice can be found in the project forum
Using custom CVMFS.
Probing CVMFS repositories ...
Probing /cvmfs/alice.cern.ch... OK
Probing /cvmfs/cvmfs-config.cern.ch... OK
Probing /cvmfs/grid.cern.ch... OK
Probing /cvmfs/sft.cern.ch... OK
Excerpt from "cvmfs_config stat":
VERSION HOST PROXY
2.13.3.0 http://s1cern-cvmfs.openhtc.io DIRECT
******************************************************************
IMPORTANT HINT(S)!
******************************************************************
CVMFS server: http://s1cern-cvmfs.openhtc.io
CVMFS proxy: DIRECT
No local HTTP proxy found.
With this setup concurrently running containers can't share
a common CVMFS cache. A local HTTP proxy is therefore
highly recommended.
More info how to configure a local HTTP proxy:
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5473
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5474
******************************************************************
Environment HTTP proxy: not set
job: htmld=/var/www/lighttpd
job: unpack exitcode=0
Could not download a wpad.dat from lhchomeproxy.{cern.ch|fnal.gov}
Could not find a local HTTP proxy
CVMFS and Frontier will have to use DIRECT connections
This makes the application less efficient
It also puts higher load on the project servers
Setting up a local HTTP proxy is highly recommended
Advice can be found in the project forum
Using custom CVMFS.
Probing CVMFS repositories ...
Probing /cvmfs/alice.cern.ch... OK
Probing /cvmfs/cvmfs-config.cern.ch... OK
Probing /cvmfs/grid.cern.ch... OK
Probing /cvmfs/sft.cern.ch... OK
Excerpt from "cvmfs_config stat":
VERSION HOST PROXY
2.13.3.0 http://s1cern-cvmfs.openhtc.io DIRECT
******************************************************************
IMPORTANT HINT(S)!
******************************************************************
CVMFS server: http://s1cern-cvmfs.openhtc.io
CVMFS proxy: DIRECT
No local HTTP proxy found.
With this setup concurrently running containers can't share
a common CVMFS cache. A local HTTP proxy is therefore
highly recommended.
More info how to configure a local HTTP proxy:
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5473
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5474
******************************************************************
Environment HTTP proxy: not set
job: htmld=/var/www/lighttpd
job: unpack exitcode=0
Could not download a wpad.dat from lhchomeproxy.{cern.ch|fnal.gov}
Could not find a local HTTP proxy
CVMFS and Frontier will have to use DIRECT connections
This makes the application less efficient
It also puts higher load on the project servers
Setting up a local HTTP proxy is highly recommended
Advice can be found in the project forum
Using custom CVMFS.
Probing CVMFS repositories ...
Probing /cvmfs/alice.cern.ch... OK
Probing /cvmfs/cvmfs-config.cern.ch... OK
Probing /cvmfs/grid.cern.ch... OK
Probing /cvmfs/sft.cern.ch... OK
Excerpt from "cvmfs_config stat":
VERSION HOST PROXY
2.13.3.0 http://s1cern-cvmfs.openhtc.io DIRECT
******************************************************************
IMPORTANT HINT(S)!
******************************************************************
CVMFS server: http://s1cern-cvmfs.openhtc.io
CVMFS proxy: DIRECT
No local HTTP proxy found.
With this setup concurrently running containers can't share
a common CVMFS cache. A local HTTP proxy is therefore
highly recommended.
More info how to configure a local HTTP proxy:
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5473
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5474
******************************************************************
Environment HTTP proxy: not set
job: htmld=/var/www/lighttpd
job: unpack exitcode=0
Could not download a wpad.dat from lhchomeproxy.{cern.ch|fnal.gov}
Could not find a local HTTP proxy
CVMFS and Frontier will have to use DIRECT connections
This makes the application less efficient
It also puts higher load on the project servers
Setting up a local HTTP proxy is highly recommended
Advice can be found in the project forum
Using custom CVMFS.
Probing CVMFS repositories ...
Probing /cvmfs/alice.cern.ch... OK
Probing /cvmfs/cvmfs-config.cern.ch... OK
Probing /cvmfs/grid.cern.ch... OK
Probing /cvmfs/sft.cern.ch... OK
Excerpt from "cvmfs_config stat":
VERSION HOST PROXY
2.13.3.0 http://s1cern-cvmfs.openhtc.io DIRECT
******************************************************************
IMPORTANT HINT(S)!
******************************************************************
CVMFS server: http://s1cern-cvmfs.openhtc.io
CVMFS proxy: DIRECT
No local HTTP proxy found.
With this setup concurrently running containers can't share
a common CVMFS cache. A local HTTP proxy is therefore
highly recommended.
More info how to configure a local HTTP proxy:
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5473
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5474
******************************************************************
Environment HTTP proxy: not set
job: htmld=/var/www/lighttpd
job: unpack exitcode=0
Could not download a wpad.dat from lhchomeproxy.{cern.ch|fnal.gov}
Could not find a local HTTP proxy
CVMFS and Frontier will have to use DIRECT connections
This makes the application less efficient
It also puts higher load on the project servers
Setting up a local HTTP proxy is highly recommended
Advice can be found in the project forum
Using custom CVMFS.
Probing CVMFS repositories ...
Probing /cvmfs/alice.cern.ch... OK
Probing /cvmfs/cvmfs-config.cern.ch... OK
Probing /cvmfs/grid.cern.ch... OK
Probing /cvmfs/sft.cern.ch... OK
Excerpt from "cvmfs_config stat":
VERSION HOST PROXY
2.13.3.0 http://s1cern-cvmfs.openhtc.io DIRECT
******************************************************************
IMPORTANT HINT(S)!
******************************************************************
CVMFS server: http://s1cern-cvmfs.openhtc.io
CVMFS proxy: DIRECT
No local HTTP proxy found.
With this setup concurrently running containers can't share
a common CVMFS cache. A local HTTP proxy is therefore
highly recommended.
More info how to configure a local HTTP proxy:
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5473
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5474
******************************************************************
Environment HTTP proxy: not set
job: htmld=/var/www/lighttpd
job: unpack exitcode=0
Could not download a wpad.dat from lhchomeproxy.{cern.ch|fnal.gov}
Could not find a local HTTP proxy
CVMFS and Frontier will have to use DIRECT connections
This makes the application less efficient
It also puts higher load on the project servers
Setting up a local HTTP proxy is highly recommended
Advice can be found in the project forum
Using custom CVMFS.
Probing CVMFS repositories ...
Probing /cvmfs/alice.cern.ch... OK
Probing /cvmfs/cvmfs-config.cern.ch... OK
Probing /cvmfs/grid.cern.ch... OK
Probing /cvmfs/sft.cern.ch... OK
Excerpt from "cvmfs_config stat":
VERSION HOST PROXY
2.13.3.0 http://s1cern-cvmfs.openhtc.io DIRECT
******************************************************************
IMPORTANT HINT(S)!
******************************************************************
CVMFS server: http://s1cern-cvmfs.openhtc.io
CVMFS proxy: DIRECT
No local HTTP proxy found.
With this setup concurrently running containers can't share
a common CVMFS cache. A local HTTP proxy is therefore
highly recommended.
More info how to configure a local HTTP proxy:
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5473
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5474
******************************************************************
Environment HTTP proxy: not set
job: htmld=/var/www/lighttpd
job: unpack exitcode=0
Could not download a wpad.dat from lhchomeproxy.{cern.ch|fnal.gov}
Could not find a local HTTP proxy
CVMFS and Frontier will have to use DIRECT connections
This makes the application less efficient
It also puts higher load on the project servers
Setting up a local HTTP proxy is highly recommended
Advice can be found in the project forum
Using custom CVMFS.
Probing CVMFS repositories ...
Probing /cvmfs/alice.cern.ch... OK
Probing /cvmfs/cvmfs-config.cern.ch... OK
Probing /cvmfs/grid.cern.ch... OK
Probing /cvmfs/sft.cern.ch... OK
Excerpt from "cvmfs_config stat":
VERSION HOST PROXY
2.13.3.0 http://s1cern-cvmfs.openhtc.io DIRECT
******************************************************************
IMPORTANT HINT(S)!
******************************************************************
CVMFS server: http://s1cern-cvmfs.openhtc.io
CVMFS proxy: DIRECT
No local HTTP proxy found.
With this setup concurrently running containers can't share
a common CVMFS cache. A local HTTP proxy is therefore
highly recommended.
More info how to configure a local HTTP proxy:
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5473
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5474
******************************************************************
Environment HTTP proxy: not set
job: htmld=/var/www/lighttpd
job: unpack exitcode=0
Could not download a wpad.dat from lhchomeproxy.{cern.ch|fnal.gov}
Could not find a local HTTP proxy
CVMFS and Frontier will have to use DIRECT connections
This makes the application less efficient
It also puts higher load on the project servers
Setting up a local HTTP proxy is highly recommended
Advice can be found in the project forum
Using custom CVMFS.
Probing CVMFS repositories ...
Probing /cvmfs/alice.cern.ch... OK
Probing /cvmfs/cvmfs-config.cern.ch... OK
Probing /cvmfs/grid.cern.ch... OK
Probing /cvmfs/sft.cern.ch... OK
Excerpt from "cvmfs_config stat":
VERSION HOST PROXY
2.13.3.0 http://s1cern-cvmfs.openhtc.io DIRECT
******************************************************************
IMPORTANT HINT(S)!
******************************************************************
CVMFS server: http://s1cern-cvmfs.openhtc.io
CVMFS proxy: DIRECT
No local HTTP proxy found.
With this setup concurrently running containers can't share
a common CVMFS cache. A local HTTP proxy is therefore
highly recommended.
More info how to configure a local HTTP proxy:
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5473
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5474
******************************************************************
Environment HTTP proxy: not set
job: htmld=/var/www/lighttpd
job: unpack exitcode=0
Could not download a wpad.dat from lhchomeproxy.{cern.ch|fnal.gov}
Could not find a local HTTP proxy
CVMFS and Frontier will have to use DIRECT connections
This makes the application less efficient
It also puts higher load on the project servers
Setting up a local HTTP proxy is highly recommended
Advice can be found in the project forum
Using custom CVMFS.
Probing CVMFS repositories ...
Probing /cvmfs/alice.cern.ch... OK
Probing /cvmfs/cvmfs-config.cern.ch... OK
Probing /cvmfs/grid.cern.ch... OK
Probing /cvmfs/sft.cern.ch... OK
Excerpt from "cvmfs_config stat":
VERSION HOST PROXY
2.13.3.0 http://s1cern-cvmfs.openhtc.io DIRECT
******************************************************************
IMPORTANT HINT(S)!
******************************************************************
CVMFS server: http://s1cern-cvmfs.openhtc.io
CVMFS proxy: DIRECT
No local HTTP proxy found.
With this setup concurrently running containers can't share
a common CVMFS cache. A local HTTP proxy is therefore
highly recommended.
More info how to configure a local HTTP proxy:
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5473
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5474
******************************************************************
Environment HTTP proxy: not set
job: htmld=/var/www/lighttpd
job: unpack exitcode=0
Could not download a wpad.dat from lhchomeproxy.{cern.ch|fnal.gov}
Could not find a local HTTP proxy
CVMFS and Frontier will have to use DIRECT connections
This makes the application less efficient
It also puts higher load on the project servers
Setting up a local HTTP proxy is highly recommended
Advice can be found in the project forum
Using custom CVMFS.
Probing CVMFS repositories ...
Probing /cvmfs/alice.cern.ch... OK
Probing /cvmfs/cvmfs-config.cern.ch... OK
Probing /cvmfs/grid.cern.ch... OK
Probing /cvmfs/sft.cern.ch... OK
Excerpt from "cvmfs_config stat":
VERSION HOST PROXY
2.13.3.0 http://s1cern-cvmfs.openhtc.io DIRECT
******************************************************************
IMPORTANT HINT(S)!
******************************************************************
CVMFS server: http://s1cern-cvmfs.openhtc.io
CVMFS proxy: DIRECT
No local HTTP proxy found.
With this setup concurrently running containers can't share
a common CVMFS cache. A local HTTP proxy is therefore
highly recommended.
More info how to configure a local HTTP proxy:
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5473
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5474
******************************************************************
Environment HTTP proxy: not set
job: htmld=/var/www/lighttpd
job: unpack exitcode=0
Could not find a local HTTP proxy
CVMFS and Frontier will have to use DIRECT connections
This makes the application less efficient
It also puts higher load on the project servers
Setting up a local HTTP proxy is highly recommended
Advice can be found in the project forum
Using custom CVMFS.
Probing CVMFS repositories ...
Probing /cvmfs/alice.cern.ch... OK
Probing /cvmfs/cvmfs-config.cern.ch... OK
Probing /cvmfs/grid.cern.ch... OK
Probing /cvmfs/sft.cern.ch... OK
Excerpt from "cvmfs_config stat":
VERSION HOST PROXY
2.13.3.0 http://s1cern-cvmfs.openhtc.io DIRECT
******************************************************************
IMPORTANT HINT(S)!
******************************************************************
CVMFS server: http://s1cern-cvmfs.openhtc.io
CVMFS proxy: DIRECT
No local HTTP proxy found.
With this setup concurrently running containers can't share
a common CVMFS cache. A local HTTP proxy is therefore
highly recommended.
More info how to configure a local HTTP proxy:
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5473
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5474
******************************************************************
Environment HTTP proxy: not set
job: htmld=/var/www/lighttpd
job: unpack exitcode=0
Could not download a wpad.dat from lhchomeproxy.{cern.ch|fnal.gov}
Could not find a local HTTP proxy
CVMFS and Frontier will have to use DIRECT connections
This makes the application less efficient
It also puts higher load on the project servers
Setting up a local HTTP proxy is highly recommended
Advice can be found in the project forum
Using custom CVMFS.
Probing CVMFS repositories ...
Probing /cvmfs/alice.cern.ch... OK
Probing /cvmfs/cvmfs-config.cern.ch... OK
Probing /cvmfs/grid.cern.ch... OK
Probing /cvmfs/sft.cern.ch... OK
Excerpt from "cvmfs_config stat":
VERSION HOST PROXY
2.13.3.0 http://s1cern-cvmfs.openhtc.io DIRECT
******************************************************************
IMPORTANT HINT(S)!
******************************************************************
CVMFS server: http://s1cern-cvmfs.openhtc.io
CVMFS proxy: DIRECT
No local HTTP proxy found.
With this setup concurrently running containers can't share
a common CVMFS cache. A local HTTP proxy is therefore
highly recommended.
More info how to configure a local HTTP proxy:
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5473
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5474
******************************************************************
Environment HTTP proxy: not set
job: htmld=/var/www/lighttpd
job: unpack exitcode=0
Could not download a wpad.dat from lhchomeproxy.{cern.ch|fnal.gov}
Could not find a local HTTP proxy
CVMFS and Frontier will have to use DIRECT connections
This makes the application less efficient
It also puts higher load on the project servers
Setting up a local HTTP proxy is highly recommended
Advice can be found in the project forum
Using custom CVMFS.
Probing CVMFS repositories ...
Probing /cvmfs/alice.cern.ch... OK
Probing /cvmfs/cvmfs-config.cern.ch... OK
Probing /cvmfs/grid.cern.ch... OK
Probing /cvmfs/sft.cern.ch... OK
Excerpt from "cvmfs_config stat":
VERSION HOST PROXY
2.13.3.0 http://s1cern-cvmfs.openhtc.io DIRECT
******************************************************************
IMPORTANT HINT(S)!
******************************************************************
CVMFS server: http://s1cern-cvmfs.openhtc.io
CVMFS proxy: DIRECT
No local HTTP proxy found.
With this setup concurrently running containers can't share
a common CVMFS cache. A local HTTP proxy is therefore
highly recommended.
More info how to configure a local HTTP proxy:
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5473
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5474
******************************************************************
Environment HTTP proxy: not set
job: htmld=/var/www/lighttpd
job: unpack exitcode=0
Could not download a wpad.dat from lhchomeproxy.{cern.ch|fnal.gov}
Could not find a local HTTP proxy
CVMFS and Frontier will have to use DIRECT connections
This makes the application less efficient
It also puts higher load on the project servers
Setting up a local HTTP proxy is highly recommended
Advice can be found in the project forum
Using custom CVMFS.
Probing CVMFS repositories ...
Probing /cvmfs/alice.cern.ch... Failed!
Probing /cvmfs/cvmfs-config.cern.ch... Failed!
Probing /cvmfs/grid.cern.ch... Failed!
Probing /cvmfs/sft.cern.ch... Failed!
Probing CVMFS repositories failed
Filesystem Used Use% Mounted on
cvmfs2 398K 1% /cvmfs/cvmfs-config.cern.ch
cvmfs2 193M 5% /cvmfs/alice.cern.ch
cvmfs2 136M 4% /cvmfs/grid.cern.ch
cvmfs2 776M 20% /cvmfs/sft.cern.ch
total 1.1G 7% -
boinc_shutdown called with exit code 206
sd_delay: 947
ETA: 2026-02-25 23:55:53 UTC
EOM
stderr from container:
Could not find a local HTTP proxy
CVMFS and Frontier will have to use DIRECT connections
This makes the application less efficient
It also puts higher load on the project servers
Setting up a local HTTP proxy is highly recommended
Advice can be found in the project forum
Using custom CVMFS.
Probing CVMFS repositories ...
Probing /cvmfs/alice.cern.ch... OK
Probing /cvmfs/cvmfs-config.cern.ch... OK
Probing /cvmfs/grid.cern.ch... OK
Probing /cvmfs/sft.cern.ch... OK
Excerpt from "cvmfs_config stat":
VERSION HOST PROXY
2.13.3.0 http://s1cern-cvmfs.openhtc.io DIRECT
******************************************************************
IMPORTANT HINT(S)!
******************************************************************
CVMFS server: http://s1cern-cvmfs.openhtc.io
CVMFS proxy: DIRECT
No local HTTP proxy found.
With this setup concurrently running containers can't share
a common CVMFS cache. A local HTTP proxy is therefore
highly recommended.
More info how to configure a local HTTP proxy:
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5473
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5474
******************************************************************
Environment HTTP proxy: not set
job: htmld=/var/www/lighttpd
job: unpack exitcode=0
Could not download a wpad.dat from lhchomeproxy.{cern.ch|fnal.gov}
Could not find a local HTTP proxy
CVMFS and Frontier will have to use DIRECT connections
This makes the application less efficient
It also puts higher load on the project servers
Setting up a local HTTP proxy is highly recommended
Advice can be found in the project forum
Using custom CVMFS.
Probing CVMFS repositories ...
Probing /cvmfs/alice.cern.ch... OK
Probing /cvmfs/cvmfs-config.cern.ch... OK
Probing /cvmfs/grid.cern.ch... OK
Probing /cvmfs/sft.cern.ch... OK
Excerpt from "cvmfs_config stat":
VERSION HOST PROXY
2.13.3.0 http://s1cern-cvmfs.openhtc.io DIRECT
******************************************************************
IMPORTANT HINT(S)!
******************************************************************
CVMFS server: http://s1cern-cvmfs.openhtc.io
CVMFS proxy: DIRECT
No local HTTP proxy found.
With this setup concurrently running containers can't share
a common CVMFS cache. A local HTTP proxy is therefore
highly recommended.
More info how to configure a local HTTP proxy:
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5473
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5474
******************************************************************
Environment HTTP proxy: not set
job: htmld=/var/www/lighttpd
job: unpack exitcode=0
Could not find a local HTTP proxy
CVMFS and Frontier will have to use DIRECT connections
This makes the application less efficient
It also puts higher load on the project servers
Setting up a local HTTP proxy is highly recommended
Advice can be found in the project forum
Using custom CVMFS.
Probing CVMFS repositories ...
Probing /cvmfs/alice.cern.ch... OK
Probing /cvmfs/cvmfs-config.cern.ch... OK
Probing /cvmfs/grid.cern.ch... OK
Probing /cvmfs/sft.cern.ch... OK
Excerpt from "cvmfs_config stat":
VERSION HOST PROXY
2.13.3.0 http://s1cern-cvmfs.openhtc.io DIRECT
******************************************************************
IMPORTANT HINT(S)!
******************************************************************
CVMFS server: http://s1cern-cvmfs.openhtc.io
CVMFS proxy: DIRECT
No local HTTP proxy found.
With this setup concurrently running containers can't share
a common CVMFS cache. A local HTTP proxy is therefore
highly recommended.
More info how to configure a local HTTP proxy:
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5473
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5474
******************************************************************
Environment HTTP proxy: not set
job: htmld=/var/www/lighttpd
job: unpack exitcode=0
Could not find a local HTTP proxy
CVMFS and Frontier will have to use DIRECT connections
This makes the application less efficient
It also puts higher load on the project servers
Setting up a local HTTP proxy is highly recommended
Advice can be found in the project forum
Using custom CVMFS.
Probing CVMFS repositories ...
Probing /cvmfs/alice.cern.ch... OK
Probing /cvmfs/cvmfs-config.cern.ch... OK
Probing /cvmfs/grid.cern.ch... OK
Probing /cvmfs/sft.cern.ch... OK
Excerpt from "cvmfs_config stat":
VERSION HOST PROXY
2.13.3.0 http://s1cern-cvmfs.openhtc.io DIRECT
******************************************************************
IMPORTANT HINT(S)!
******************************************************************
CVMFS server: http://s1cern-cvmfs.openhtc.io
CVMFS proxy: DIRECT
No local HTTP proxy found.
With this setup concurrently running containers can't share
a common CVMFS cache. A local HTTP proxy is therefore
highly recommended.
More info how to configure a local HTTP proxy:
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5473
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5474
******************************************************************
Environment HTTP proxy: not set
job: htmld=/var/www/lighttpd
job: unpack exitcode=0
Could not download a wpad.dat from lhchomeproxy.{cern.ch|fnal.gov}
Could not find a local HTTP proxy
CVMFS and Frontier will have to use DIRECT connections
This makes the application less efficient
It also puts higher load on the project servers
Setting up a local HTTP proxy is highly recommended
Advice can be found in the project forum
Using custom CVMFS.
Probing CVMFS repositories ...
Probing /cvmfs/alice.cern.ch... OK
Probing /cvmfs/cvmfs-config.cern.ch... OK
Probing /cvmfs/grid.cern.ch... OK
Probing /cvmfs/sft.cern.ch... OK
Excerpt from "cvmfs_config stat":
VERSION HOST PROXY
2.13.3.0 http://s1cern-cvmfs.openhtc.io DIRECT
******************************************************************
IMPORTANT HINT(S)!
******************************************************************
CVMFS server: http://s1cern-cvmfs.openhtc.io
CVMFS proxy: DIRECT
No local HTTP proxy found.
With this setup concurrently running containers can't share
a common CVMFS cache. A local HTTP proxy is therefore
highly recommended.
More info how to configure a local HTTP proxy:
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5473
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5474
******************************************************************
Environment HTTP proxy: not set
job: htmld=/var/www/lighttpd
job: unpack exitcode=0
Could not download a wpad.dat from lhchomeproxy.{cern.ch|fnal.gov}
Could not find a local HTTP proxy
CVMFS and Frontier will have to use DIRECT connections
This makes the application less efficient
It also puts higher load on the project servers
Setting up a local HTTP proxy is highly recommended
Advice can be found in the project forum
Using custom CVMFS.
Probing CVMFS repositories ...
Probing /cvmfs/alice.cern.ch... OK
Probing /cvmfs/cvmfs-config.cern.ch... OK
Probing /cvmfs/grid.cern.ch... OK
Probing /cvmfs/sft.cern.ch... OK
Excerpt from "cvmfs_config stat":
VERSION HOST PROXY
2.13.3.0 http://s1cern-cvmfs.openhtc.io DIRECT
******************************************************************
IMPORTANT HINT(S)!
******************************************************************
CVMFS server: http://s1cern-cvmfs.openhtc.io
CVMFS proxy: DIRECT
No local HTTP proxy found.
With this setup concurrently running containers can't share
a common CVMFS cache. A local HTTP proxy is therefore
highly recommended.
More info how to configure a local HTTP proxy:
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5473
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5474
******************************************************************
Environment HTTP proxy: not set
job: htmld=/var/www/lighttpd
job: unpack exitcode=0
Could not find a local HTTP proxy
CVMFS and Frontier will have to use DIRECT connections
This makes the application less efficient
It also puts higher load on the project servers
Setting up a local HTTP proxy is highly recommended
Advice can be found in the project forum
Using custom CVMFS.
Probing CVMFS repositories ...
Probing /cvmfs/alice.cern.ch... OK
Probing /cvmfs/cvmfs-config.cern.ch... OK
Probing /cvmfs/grid.cern.ch... OK
Probing /cvmfs/sft.cern.ch... OK
Excerpt from "cvmfs_config stat":
VERSION HOST PROXY
2.13.3.0 http://s1cern-cvmfs.openhtc.io DIRECT
******************************************************************
IMPORTANT HINT(S)!
******************************************************************
CVMFS server: http://s1cern-cvmfs.openhtc.io
CVMFS proxy: DIRECT
No local HTTP proxy found.
With this setup concurrently running containers can't share
a common CVMFS cache. A local HTTP proxy is therefore
highly recommended.
More info how to configure a local HTTP proxy:
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5473
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5474
******************************************************************
Environment HTTP proxy: not set
job: htmld=/var/www/lighttpd
job: unpack exitcode=0
Could not download a wpad.dat from lhchomeproxy.{cern.ch|fnal.gov}
Could not find a local HTTP proxy
CVMFS and Frontier will have to use DIRECT connections
This makes the application less efficient
It also puts higher load on the project servers
Setting up a local HTTP proxy is highly recommended
Advice can be found in the project forum
Using custom CVMFS.
Probing CVMFS repositories ...
Probing /cvmfs/alice.cern.ch... OK
Probing /cvmfs/cvmfs-config.cern.ch... OK
Probing /cvmfs/grid.cern.ch... OK
Probing /cvmfs/sft.cern.ch... OK
Excerpt from "cvmfs_config stat":
VERSION HOST PROXY
2.13.3.0 http://s1cern-cvmfs.openhtc.io DIRECT
******************************************************************
IMPORTANT HINT(S)!
******************************************************************
CVMFS server: http://s1cern-cvmfs.openhtc.io
CVMFS proxy: DIRECT
No local HTTP proxy found.
With this setup concurrently running containers can't share
a common CVMFS cache. A local HTTP proxy is therefore
highly recommended.
More info how to configure a local HTTP proxy:
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5473
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5474
******************************************************************
Environment HTTP proxy: not set
job: htmld=/var/www/lighttpd
job: unpack exitcode=0
Could not download a wpad.dat from lhchomeproxy.{cern.ch|fnal.gov}
Could not find a local HTTP proxy
CVMFS and Frontier will have to use DIRECT connections
This makes the application less efficient
It also puts higher load on the project servers
Setting up a local HTTP proxy is highly recommended
Advice can be found in the project forum
Using custom CVMFS.
Probing CVMFS repositories ...
Probing /cvmfs/alice.cern.ch... OK
Probing /cvmfs/cvmfs-config.cern.ch... OK
Probing /cvmfs/grid.cern.ch... OK
Probing /cvmfs/sft.cern.ch... OK
Excerpt from "cvmfs_config stat":
VERSION HOST PROXY
2.13.3.0 http://s1cern-cvmfs.openhtc.io DIRECT
******************************************************************
IMPORTANT HINT(S)!
******************************************************************
CVMFS server: http://s1cern-cvmfs.openhtc.io
CVMFS proxy: DIRECT
No local HTTP proxy found.
With this setup concurrently running containers can't share
a common CVMFS cache. A local HTTP proxy is therefore
highly recommended.
More info how to configure a local HTTP proxy:
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5473
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5474
******************************************************************
Environment HTTP proxy: not set
job: htmld=/var/www/lighttpd
job: unpack exitcode=0
Could not download a wpad.dat from lhchomeproxy.{cern.ch|fnal.gov}
Could not find a local HTTP proxy
CVMFS and Frontier will have to use DIRECT connections
This makes the application less efficient
It also puts higher load on the project servers
Setting up a local HTTP proxy is highly recommended
Advice can be found in the project forum
Using custom CVMFS.
Probing CVMFS repositories ...
Probing /cvmfs/alice.cern.ch... OK
Probing /cvmfs/cvmfs-config.cern.ch... OK
Probing /cvmfs/grid.cern.ch... OK
Probing /cvmfs/sft.cern.ch... OK
Excerpt from "cvmfs_config stat":
VERSION HOST PROXY
2.13.3.0 http://s1cern-cvmfs.openhtc.io DIRECT
******************************************************************
IMPORTANT HINT(S)!
******************************************************************
CVMFS server: http://s1cern-cvmfs.openhtc.io
CVMFS proxy: DIRECT
No local HTTP proxy found.
With this setup concurrently running containers can't share
a common CVMFS cache. A local HTTP proxy is therefore
highly recommended.
More info how to configure a local HTTP proxy:
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5473
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5474
******************************************************************
Environment HTTP proxy: not set
job: htmld=/var/www/lighttpd
job: unpack exitcode=0
Could not download a wpad.dat from lhchomeproxy.{cern.ch|fnal.gov}
Could not find a local HTTP proxy
CVMFS and Frontier will have to use DIRECT connections
This makes the application less efficient
It also puts higher load on the project servers
Setting up a local HTTP proxy is highly recommended
Advice can be found in the project forum
Using custom CVMFS.
Probing CVMFS repositories ...
Probing /cvmfs/alice.cern.ch... OK
Probing /cvmfs/cvmfs-config.cern.ch... OK
Probing /cvmfs/grid.cern.ch... OK
Probing /cvmfs/sft.cern.ch... OK
Excerpt from "cvmfs_config stat":
VERSION HOST PROXY
2.13.3.0 http://s1cern-cvmfs.openhtc.io DIRECT
******************************************************************
IMPORTANT HINT(S)!
******************************************************************
CVMFS server: http://s1cern-cvmfs.openhtc.io
CVMFS proxy: DIRECT
No local HTTP proxy found.
With this setup concurrently running containers can't share
a common CVMFS cache. A local HTTP proxy is therefore
highly recommended.
More info how to configure a local HTTP proxy:
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5473
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5474
******************************************************************
Environment HTTP proxy: not set
job: htmld=/var/www/lighttpd
job: unpack exitcode=0
Could not download a wpad.dat from lhchomeproxy.{cern.ch|fnal.gov}
Could not find a local HTTP proxy
CVMFS and Frontier will have to use DIRECT connections
This makes the application less efficient
It also puts higher load on the project servers
Setting up a local HTTP proxy is highly recommended
Advice can be found in the project forum
Using custom CVMFS.
Probing CVMFS repositories ...
Probing /cvmfs/alice.cern.ch... OK
Probing /cvmfs/cvmfs-config.cern.ch... OK
Probing /cvmfs/grid.cern.ch... OK
Probing /cvmfs/sft.cern.ch... OK
Excerpt from "cvmfs_config stat":
VERSION HOST PROXY
2.13.3.0 http://s1cern-cvmfs.openhtc.io DIRECT
******************************************************************
IMPORTANT HINT(S)!
******************************************************************
CVMFS server: http://s1cern-cvmfs.openhtc.io
CVMFS proxy: DIRECT
No local HTTP proxy found.
With this setup concurrently running containers can't share
a common CVMFS cache. A local HTTP proxy is therefore
highly recommended.
More info how to configure a local HTTP proxy:
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5473
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5474
******************************************************************
Environment HTTP proxy: not set
job: htmld=/var/www/lighttpd
job: unpack exitcode=0
Could not download a wpad.dat from lhchomeproxy.{cern.ch|fnal.gov}
Could not find a local HTTP proxy
CVMFS and Frontier will have to use DIRECT connections
This makes the application less efficient
It also puts higher load on the project servers
Setting up a local HTTP proxy is highly recommended
Advice can be found in the project forum
Using custom CVMFS.
Probing CVMFS repositories ...
Probing /cvmfs/alice.cern.ch... OK
Probing /cvmfs/cvmfs-config.cern.ch... OK
Probing /cvmfs/grid.cern.ch... OK
Probing /cvmfs/sft.cern.ch... OK
Excerpt from "cvmfs_config stat":
VERSION HOST PROXY
2.13.3.0 http://s1cern-cvmfs.openhtc.io DIRECT
******************************************************************
IMPORTANT HINT(S)!
******************************************************************
CVMFS server: http://s1cern-cvmfs.openhtc.io
CVMFS proxy: DIRECT
No local HTTP proxy found.
With this setup concurrently running containers can't share
a common CVMFS cache. A local HTTP proxy is therefore
highly recommended.
More info how to configure a local HTTP proxy:
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5473
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5474
******************************************************************
Environment HTTP proxy: not set
job: htmld=/var/www/lighttpd
job: unpack exitcode=0
Could not download a wpad.dat from lhchomeproxy.{cern.ch|fnal.gov}
Could not find a local HTTP proxy
CVMFS and Frontier will have to use DIRECT connections
This makes the application less efficient
It also puts higher load on the project servers
Setting up a local HTTP proxy is highly recommended
Advice can be found in the project forum
Using custom CVMFS.
Probing CVMFS repositories ...
Probing /cvmfs/alice.cern.ch... OK
Probing /cvmfs/cvmfs-config.cern.ch... OK
Probing /cvmfs/grid.cern.ch... OK
Probing /cvmfs/sft.cern.ch... OK
Excerpt from "cvmfs_config stat":
VERSION HOST PROXY
2.13.3.0 http://s1cern-cvmfs.openhtc.io DIRECT
******************************************************************
IMPORTANT HINT(S)!
******************************************************************
CVMFS server: http://s1cern-cvmfs.openhtc.io
CVMFS proxy: DIRECT
No local HTTP proxy found.
With this setup concurrently running containers can't share
a common CVMFS cache. A local HTTP proxy is therefore
highly recommended.
More info how to configure a local HTTP proxy:
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5473
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5474
******************************************************************
Environment HTTP proxy: not set
job: htmld=/var/www/lighttpd
job: unpack exitcode=0
Could not download a wpad.dat from lhchomeproxy.{cern.ch|fnal.gov}
Could not find a local HTTP proxy
CVMFS and Frontier will have to use DIRECT connections
This makes the application less efficient
It also puts higher load on the project servers
Setting up a local HTTP proxy is highly recommended
Advice can be found in the project forum
Using custom CVMFS.
Probing CVMFS repositories ...
Probing /cvmfs/alice.cern.ch... OK
Probing /cvmfs/cvmfs-config.cern.ch... OK
Probing /cvmfs/grid.cern.ch... OK
Probing /cvmfs/sft.cern.ch... OK
Excerpt from "cvmfs_config stat":
VERSION HOST PROXY
2.13.3.0 http://s1cern-cvmfs.openhtc.io DIRECT
******************************************************************
IMPORTANT HINT(S)!
******************************************************************
CVMFS server: http://s1cern-cvmfs.openhtc.io
CVMFS proxy: DIRECT
No local HTTP proxy found.
With this setup concurrently running containers can't share
a common CVMFS cache. A local HTTP proxy is therefore
highly recommended.
More info how to configure a local HTTP proxy:
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5473
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5474
******************************************************************
Environment HTTP proxy: not set
job: htmld=/var/www/lighttpd
job: unpack exitcode=0
Could not download a wpad.dat from lhchomeproxy.{cern.ch|fnal.gov}
Could not find a local HTTP proxy
CVMFS and Frontier will have to use DIRECT connections
This makes the application less efficient
It also puts higher load on the project servers
Setting up a local HTTP proxy is highly recommended
Advice can be found in the project forum
Using custom CVMFS.
Probing CVMFS repositories ...
Probing /cvmfs/alice.cern.ch... OK
Probing /cvmfs/cvmfs-config.cern.ch... OK
Probing /cvmfs/grid.cern.ch... OK
Probing /cvmfs/sft.cern.ch... OK
Excerpt from "cvmfs_config stat":
VERSION HOST PROXY
2.13.3.0 http://s1cern-cvmfs.openhtc.io DIRECT
******************************************************************
IMPORTANT HINT(S)!
******************************************************************
CVMFS server: http://s1cern-cvmfs.openhtc.io
CVMFS proxy: DIRECT
No local HTTP proxy found.
With this setup concurrently running containers can't share
a common CVMFS cache. A local HTTP proxy is therefore
highly recommended.
More info how to configure a local HTTP proxy:
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5473
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5474
******************************************************************
Environment HTTP proxy: not set
job: htmld=/var/www/lighttpd
job: unpack exitcode=0
Could not download a wpad.dat from lhchomeproxy.{cern.ch|fnal.gov}
Could not find a local HTTP proxy
CVMFS and Frontier will have to use DIRECT connections
This makes the application less efficient
It also puts higher load on the project servers
Setting up a local HTTP proxy is highly recommended
Advice can be found in the project forum
Using custom CVMFS.
Probing CVMFS repositories ...
Probing /cvmfs/alice.cern.ch... OK
Probing /cvmfs/cvmfs-config.cern.ch... OK
Probing /cvmfs/grid.cern.ch... OK
Probing /cvmfs/sft.cern.ch... OK
Excerpt from "cvmfs_config stat":
VERSION HOST PROXY
2.13.3.0 http://s1cern-cvmfs.openhtc.io DIRECT
******************************************************************
IMPORTANT HINT(S)!
******************************************************************
CVMFS server: http://s1cern-cvmfs.openhtc.io
CVMFS proxy: DIRECT
No local HTTP proxy found.
With this setup concurrently running containers can't share
a common CVMFS cache. A local HTTP proxy is therefore
highly recommended.
More info how to configure a local HTTP proxy:
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5473
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5474
******************************************************************
Environment HTTP proxy: not set
job: htmld=/var/www/lighttpd
job: unpack exitcode=0
Could not download a wpad.dat from lhchomeproxy.{cern.ch|fnal.gov}
Could not find a local HTTP proxy
CVMFS and Frontier will have to use DIRECT connections
This makes the application less efficient
It also puts higher load on the project servers
Setting up a local HTTP proxy is highly recommended
Advice can be found in the project forum
Using custom CVMFS.
Probing CVMFS repositories ...
Probing /cvmfs/alice.cern.ch... OK
Probing /cvmfs/cvmfs-config.cern.ch... OK
Probing /cvmfs/grid.cern.ch... OK
Probing /cvmfs/sft.cern.ch... OK
Excerpt from "cvmfs_config stat":
VERSION HOST PROXY
2.13.3.0 http://s1cern-cvmfs.openhtc.io DIRECT
******************************************************************
IMPORTANT HINT(S)!
******************************************************************
CVMFS server: http://s1cern-cvmfs.openhtc.io
CVMFS proxy: DIRECT
No local HTTP proxy found.
With this setup concurrently running containers can't share
a common CVMFS cache. A local HTTP proxy is therefore
highly recommended.
More info how to configure a local HTTP proxy:
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5473
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5474
******************************************************************
Environment HTTP proxy: not set
job: htmld=/var/www/lighttpd
job: unpack exitcode=0
Could not download a wpad.dat from lhchomeproxy.{cern.ch|fnal.gov}
Could not find a local HTTP proxy
CVMFS and Frontier will have to use DIRECT connections
This makes the application less efficient
It also puts higher load on the project servers
Setting up a local HTTP proxy is highly recommended
Advice can be found in the project forum
Using custom CVMFS.
Probing CVMFS repositories ...
Probing /cvmfs/alice.cern.ch... OK
Probing /cvmfs/cvmfs-config.cern.ch... OK
Probing /cvmfs/grid.cern.ch... OK
Probing /cvmfs/sft.cern.ch... OK
Excerpt from "cvmfs_config stat":
VERSION HOST PROXY
2.13.3.0 http://s1cern-cvmfs.openhtc.io DIRECT
******************************************************************
IMPORTANT HINT(S)!
******************************************************************
CVMFS server: http://s1cern-cvmfs.openhtc.io
CVMFS proxy: DIRECT
No local HTTP proxy found.
With this setup concurrently running containers can't share
a common CVMFS cache. A local HTTP proxy is therefore
highly recommended.
More info how to configure a local HTTP proxy:
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5473
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5474
******************************************************************
Environment HTTP proxy: not set
job: htmld=/var/www/lighttpd
job: unpack exitcode=0
Could not download a wpad.dat from lhchomeproxy.{cern.ch|fnal.gov}
Could not find a local HTTP proxy
CVMFS and Frontier will have to use DIRECT connections
This makes the application less efficient
It also puts higher load on the project servers
Setting up a local HTTP proxy is highly recommended
Advice can be found in the project forum
Using custom CVMFS.
Probing CVMFS repositories ...
Probing /cvmfs/alice.cern.ch... OK
Probing /cvmfs/cvmfs-config.cern.ch... OK
Probing /cvmfs/grid.cern.ch... OK
Probing /cvmfs/sft.cern.ch... OK
Excerpt from "cvmfs_config stat":
VERSION HOST PROXY
2.13.3.0 http://s1cern-cvmfs.openhtc.io DIRECT
******************************************************************
IMPORTANT HINT(S)!
******************************************************************
CVMFS server: http://s1cern-cvmfs.openhtc.io
CVMFS proxy: DIRECT
No local HTTP proxy found.
With this setup concurrently running containers can't share
a common CVMFS cache. A local HTTP proxy is therefore
highly recommended.
More info how to configure a local HTTP proxy:
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5473
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5474
******************************************************************
Environment HTTP proxy: not set
job: htmld=/var/www/lighttpd
job: unpack exitcode=0
Could not download a wpad.dat from lhchomeproxy.{cern.ch|fnal.gov}
Could not find a local HTTP proxy
CVMFS and Frontier will have to use DIRECT connections
This makes the application less efficient
It also puts higher load on the project servers
Setting up a local HTTP proxy is highly recommended
Advice can be found in the project forum
Using custom CVMFS.
Probing CVMFS repositories ...
Probing /cvmfs/alice.cern.ch... OK
Probing /cvmfs/cvmfs-config.cern.ch... OK
Probing /cvmfs/grid.cern.ch... OK
Probing /cvmfs/sft.cern.ch... OK
Excerpt from "cvmfs_config stat":
VERSION HOST PROXY
2.13.3.0 http://s1cern-cvmfs.openhtc.io DIRECT
******************************************************************
IMPORTANT HINT(S)!
******************************************************************
CVMFS server: http://s1cern-cvmfs.openhtc.io
CVMFS proxy: DIRECT
No local HTTP proxy found.
With this setup concurrently running containers can't share
a common CVMFS cache. A local HTTP proxy is therefore
highly recommended.
More info how to configure a local HTTP proxy:
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5473
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5474
******************************************************************
Environment HTTP proxy: not set
job: htmld=/var/www/lighttpd
job: unpack exitcode=0
Could not download a wpad.dat from lhchomeproxy.{cern.ch|fnal.gov}
Could not find a local HTTP proxy
CVMFS and Frontier will have to use DIRECT connections
This makes the application less efficient
It also puts higher load on the project servers
Setting up a local HTTP proxy is highly recommended
Advice can be found in the project forum
Using custom CVMFS.
Probing CVMFS repositories ...
Probing /cvmfs/alice.cern.ch... OK
Probing /cvmfs/cvmfs-config.cern.ch... OK
Probing /cvmfs/grid.cern.ch... OK
Probing /cvmfs/sft.cern.ch... OK
Excerpt from "cvmfs_config stat":
VERSION HOST PROXY
2.13.3.0 http://s1cern-cvmfs.openhtc.io DIRECT
******************************************************************
IMPORTANT HINT(S)!
******************************************************************
CVMFS server: http://s1cern-cvmfs.openhtc.io
CVMFS proxy: DIRECT
No local HTTP proxy found.
With this setup concurrently running containers can't share
a common CVMFS cache. A local HTTP proxy is therefore
highly recommended.
More info how to configure a local HTTP proxy:
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5473
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5474
******************************************************************
Environment HTTP proxy: not set
job: htmld=/var/www/lighttpd
job: unpack exitcode=0
Could not download a wpad.dat from lhchomeproxy.{cern.ch|fnal.gov}
Could not find a local HTTP proxy
CVMFS and Frontier will have to use DIRECT connections
This makes the application less efficient
It also puts higher load on the project servers
Setting up a local HTTP proxy is highly recommended
Advice can be found in the project forum
Using custom CVMFS.
Probing CVMFS repositories ...
Probing /cvmfs/alice.cern.ch... OK
Probing /cvmfs/cvmfs-config.cern.ch... OK
Probing /cvmfs/grid.cern.ch... OK
Probing /cvmfs/sft.cern.ch... OK
Excerpt from "cvmfs_config stat":
VERSION HOST PROXY
2.13.3.0 http://s1cern-cvmfs.openhtc.io DIRECT
******************************************************************
IMPORTANT HINT(S)!
******************************************************************
CVMFS server: http://s1cern-cvmfs.openhtc.io
CVMFS proxy: DIRECT
No local HTTP proxy found.
With this setup concurrently running containers can't share
a common CVMFS cache. A local HTTP proxy is therefore
highly recommended.
More info how to configure a local HTTP proxy:
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5473
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5474
******************************************************************
Environment HTTP proxy: not set
job: htmld=/var/www/lighttpd
job: unpack exitcode=0
Could not download a wpad.dat from lhchomeproxy.{cern.ch|fnal.gov}
Could not find a local HTTP proxy
CVMFS and Frontier will have to use DIRECT connections
This makes the application less efficient
It also puts higher load on the project servers
Setting up a local HTTP proxy is highly recommended
Advice can be found in the project forum
Using custom CVMFS.
Probing CVMFS repositories ...
Probing /cvmfs/alice.cern.ch... OK
Probing /cvmfs/cvmfs-config.cern.ch... OK
Probing /cvmfs/grid.cern.ch... OK
Probing /cvmfs/sft.cern.ch... OK
Excerpt from "cvmfs_config stat":
VERSION HOST PROXY
2.13.3.0 http://s1cern-cvmfs.openhtc.io DIRECT
******************************************************************
IMPORTANT HINT(S)!
******************************************************************
CVMFS server: http://s1cern-cvmfs.openhtc.io
CVMFS proxy: DIRECT
No local HTTP proxy found.
With this setup concurrently running containers can't share
a common CVMFS cache. A local HTTP proxy is therefore
highly recommended.
More info how to configure a local HTTP proxy:
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5473
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5474
******************************************************************
Environment HTTP proxy: not set
job: htmld=/var/www/lighttpd
job: unpack exitcode=0
Could not download a wpad.dat from lhchomeproxy.{cern.ch|fnal.gov}
Could not find a local HTTP proxy
CVMFS and Frontier will have to use DIRECT connections
This makes the application less efficient
It also puts higher load on the project servers
Setting up a local HTTP proxy is highly recommended
Advice can be found in the project forum
Using custom CVMFS.
Probing CVMFS repositories ...
Probing /cvmfs/alice.cern.ch... OK
Probing /cvmfs/cvmfs-config.cern.ch... OK
Probing /cvmfs/grid.cern.ch... OK
Probing /cvmfs/sft.cern.ch... OK
Excerpt from "cvmfs_config stat":
VERSION HOST PROXY
2.13.3.0 http://s1cern-cvmfs.openhtc.io DIRECT
******************************************************************
IMPORTANT HINT(S)!
******************************************************************
CVMFS server: http://s1cern-cvmfs.openhtc.io
CVMFS proxy: DIRECT
No local HTTP proxy found.
With this setup concurrently running containers can't share
a common CVMFS cache. A local HTTP proxy is therefore
highly recommended.
More info how to configure a local HTTP proxy:
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5473
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5474
******************************************************************
Environment HTTP proxy: not set
job: htmld=/var/www/lighttpd
job: unpack exitcode=0
Could not download a wpad.dat from lhchomeproxy.{cern.ch|fnal.gov}
Could not find a local HTTP proxy
CVMFS and Frontier will have to use DIRECT connections
This makes the application less efficient
It also puts higher load on the project servers
Setting up a local HTTP proxy is highly recommended
Advice can be found in the project forum
Using custom CVMFS.
Probing CVMFS repositories ...
Probing /cvmfs/alice.cern.ch... OK
Probing /cvmfs/cvmfs-config.cern.ch... OK
Probing /cvmfs/grid.cern.ch... OK
Probing /cvmfs/sft.cern.ch... OK
Excerpt from "cvmfs_config stat":
VERSION HOST PROXY
2.13.3.0 http://s1cern-cvmfs.openhtc.io DIRECT
******************************************************************
IMPORTANT HINT(S)!
******************************************************************
CVMFS server: http://s1cern-cvmfs.openhtc.io
CVMFS proxy: DIRECT
No local HTTP proxy found.
With this setup concurrently running containers can't share
a common CVMFS cache. A local HTTP proxy is therefore
highly recommended.
More info how to configure a local HTTP proxy:
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5473
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5474
******************************************************************
Environment HTTP proxy: not set
job: htmld=/var/www/lighttpd
job: unpack exitcode=0
Could not download a wpad.dat from lhchomeproxy.{cern.ch|fnal.gov}
Could not find a local HTTP proxy
CVMFS and Frontier will have to use DIRECT connections
This makes the application less efficient
It also puts higher load on the project servers
Setting up a local HTTP proxy is highly recommended
Advice can be found in the project forum
Using custom CVMFS.
Probing CVMFS repositories ...
Probing /cvmfs/alice.cern.ch... OK
Probing /cvmfs/cvmfs-config.cern.ch... OK
Probing /cvmfs/grid.cern.ch... OK
Probing /cvmfs/sft.cern.ch... OK
Excerpt from "cvmfs_config stat":
VERSION HOST PROXY
2.13.3.0 http://s1cern-cvmfs.openhtc.io DIRECT
******************************************************************
IMPORTANT HINT(S)!
******************************************************************
CVMFS server: http://s1cern-cvmfs.openhtc.io
CVMFS proxy: DIRECT
No local HTTP proxy found.
With this setup concurrently running containers can't share
a common CVMFS cache. A local HTTP proxy is therefore
highly recommended.
More info how to configure a local HTTP proxy:
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5473
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5474
******************************************************************
Environment HTTP proxy: not set
job: htmld=/var/www/lighttpd
job: unpack exitcode=0
Could not find a local HTTP proxy
CVMFS and Frontier will have to use DIRECT connections
This makes the application less efficient
It also puts higher load on the project servers
Setting up a local HTTP proxy is highly recommended
Advice can be found in the project forum
Using custom CVMFS.
Probing CVMFS repositories ...
Probing /cvmfs/alice.cern.ch... OK
Probing /cvmfs/cvmfs-config.cern.ch... OK
Probing /cvmfs/grid.cern.ch... OK
Probing /cvmfs/sft.cern.ch... OK
Excerpt from "cvmfs_config stat":
VERSION HOST PROXY
2.13.3.0 http://s1cern-cvmfs.openhtc.io DIRECT
******************************************************************
IMPORTANT HINT(S)!
******************************************************************
CVMFS server: http://s1cern-cvmfs.openhtc.io
CVMFS proxy: DIRECT
No local HTTP proxy found.
With this setup concurrently running containers can't share
a common CVMFS cache. A local HTTP proxy is therefore
highly recommended.
More info how to configure a local HTTP proxy:
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5473
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5474
******************************************************************
Environment HTTP proxy: not set
job: htmld=/var/www/lighttpd
job: unpack exitcode=0
Could not download a wpad.dat from lhchomeproxy.{cern.ch|fnal.gov}
Could not find a local HTTP proxy
CVMFS and Frontier will have to use DIRECT connections
This makes the application less efficient
It also puts higher load on the project servers
Setting up a local HTTP proxy is highly recommended
Advice can be found in the project forum
Using custom CVMFS.
Probing CVMFS repositories ...
Probing /cvmfs/alice.cern.ch... OK
Probing /cvmfs/cvmfs-config.cern.ch... OK
Probing /cvmfs/grid.cern.ch... OK
Probing /cvmfs/sft.cern.ch... OK
Excerpt from "cvmfs_config stat":
VERSION HOST PROXY
2.13.3.0 http://s1cern-cvmfs.openhtc.io DIRECT
******************************************************************
IMPORTANT HINT(S)!
******************************************************************
CVMFS server: http://s1cern-cvmfs.openhtc.io
CVMFS proxy: DIRECT
No local HTTP proxy found.
With this setup concurrently running containers can't share
a common CVMFS cache. A local HTTP proxy is therefore
highly recommended.
More info how to configure a local HTTP proxy:
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5473
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5474
******************************************************************
Environment HTTP proxy: not set
job: htmld=/var/www/lighttpd
job: unpack exitcode=0
Could not download a wpad.dat from lhchomeproxy.{cern.ch|fnal.gov}
Could not find a local HTTP proxy
CVMFS and Frontier will have to use DIRECT connections
This makes the application less efficient
It also puts higher load on the project servers
Setting up a local HTTP proxy is highly recommended
Advice can be found in the project forum
Using custom CVMFS.
Probing CVMFS repositories ...
Probing /cvmfs/alice.cern.ch... OK
Probing /cvmfs/cvmfs-config.cern.ch... OK
Probing /cvmfs/grid.cern.ch... OK
Probing /cvmfs/sft.cern.ch... OK
Excerpt from "cvmfs_config stat":
VERSION HOST PROXY
2.13.3.0 http://s1cern-cvmfs.openhtc.io DIRECT
******************************************************************
IMPORTANT HINT(S)!
******************************************************************
CVMFS server: http://s1cern-cvmfs.openhtc.io
CVMFS proxy: DIRECT
No local HTTP proxy found.
With this setup concurrently running containers can't share
a common CVMFS cache. A local HTTP proxy is therefore
highly recommended.
More info how to configure a local HTTP proxy:
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5473
https://lhcathome.cern.ch/lhcathome/forum_thread.php?id=5474
******************************************************************
Environment HTTP proxy: not set
job: htmld=/var/www/lighttpd
job: unpack exitcode=0
Could not download a wpad.dat from lhchomeproxy.{cern.ch|fnal.gov}
Could not find a local HTTP proxy
CVMFS and Frontier will have to use DIRECT connections
This makes the application less efficient
It also puts higher load on the project servers
Setting up a local HTTP proxy is highly recommended
Advice can be found in the project forum
Using custom CVMFS.
Probing CVMFS repositories ...
Probing /cvmfs/alice.cern.ch... Failed!
Probing /cvmfs/cvmfs-config.cern.ch... Failed!
Probing /cvmfs/grid.cern.ch... Failed!
Probing /cvmfs/sft.cern.ch... Failed!
Probing CVMFS repositories failed
Filesystem Used Use% Mounted on
cvmfs2 398K 1% /cvmfs/cvmfs-config.cern.ch
cvmfs2 193M 5% /cvmfs/alice.cern.ch
cvmfs2 136M 4% /cvmfs/grid.cern.ch
cvmfs2 776M 20% /cvmfs/sft.cern.ch
total 1.1G 7% -
boinc_shutdown called with exit code 206
sd_delay: 947
ETA: 2026-02-25 23:55:53 UTC
EOM
stderr end
running docker command: container rm boinc__lhcathome.cern.ch_lhcathome__theory_2922-4855879-682_0
program: podman
command output:
boinc__lhcathome.cern.ch_lhcathome__theory_2922-4855879-682_0
EOM
running docker command: image rm boinc__lhcathome.cern.ch_lhcathome__theory_2922-4855879-682
program: podman
command output:
Untagged: localhost/boinc__lhcathome.cern.ch_lhcathome__theory_2922-4855879-682:latest
EOM
2026-02-26 00:55:57 (4608): called boinc_finish(206)
</stderr_txt>
]]>
©2026 CERN