Name | Theory_2848-4599233-750_0 |
Workunit | 231997327 |
Created | 1 May 2025, 12:41:18 UTC |
Sent | 1 May 2025, 16:36:36 UTC |
Report deadline | 12 May 2025, 16:36:36 UTC |
Received | 1 May 2025, 20:02:34 UTC |
Server state | Over |
Outcome | Computation error |
Client state | Compute error |
Exit status | 1 (0x00000001) Unknown error code |
Computer ID | 10832058 |
Run time | 9 sec |
CPU time | |
Validate state | Invalid |
Credit | 0.00 |
Device peak FLOPS | 4.74 GFLOPS |
Application version | Theory Simulation v300.95 (vbox64_theory) x86_64-apple-darwin |
Peak working set size | 2.92 MB |
Peak swap size | 391.86 GB |
Peak disk usage | 1.67 MB |
<core_client_version>8.0.2</core_client_version> <![CDATA[ <message> process exited with code 1 (0x1, -255)</message> <stderr_txt> 2025-05-01 09:39:40 (8968): vboxwrapper version 26210 2025-05-01 09:39:40 (8968): BOINC client version: 8.0.2 2025-05-01 09:39:40 (8968): Detected: VirtualBox VboxManage Interface (Version: 6.1.32) 2025-05-01 09:39:40 (8968): Detected: Sandbox Configuration Enabled 2025-05-01 09:39:41 (8968): Detected: Heartbeat check (file: 'heartbeat' every 1800.000000 seconds) 2025-05-01 09:39:41 (8968): Successfully copied 'init_data.xml' to the shared directory. 2025-05-01 09:39:41 (8968): Successfully copied 'input' to the shared directory. 2025-05-01 09:39:41 (8968): Create VM. (boinc_bf546202f0ebdc95, slot#8) 2025-05-01 09:39:41 (8968): Setting Memory Size for VM. (630MB) 2025-05-01 09:39:41 (8968): Setting CPU Count for VM. (1) 2025-05-01 09:39:41 (8968): Setting Chipset Options for VM. 2025-05-01 09:39:41 (8968): Setting Graphics Controller Options for VM. (Driver: VBoxVGA, 16MB) 2025-05-01 09:39:41 (8968): Setting Boot Options for VM. 2025-05-01 09:39:41 (8968): Setting Network Configuration for NAT. (Driver: virtio) 2025-05-01 09:39:42 (8968): Enabling VM Network Access. 2025-05-01 09:39:42 (8968): Disabling USB Support for VM. 2025-05-01 09:39:42 (8968): Disabling COM Port Support for VM. 2025-05-01 09:39:42 (8968): Disabling Audio Support for VM. 2025-05-01 09:39:42 (8968): Disabling Clipboard Support for VM. 2025-05-01 09:39:42 (8968): Disabling Drag and Drop Support for VM. 2025-05-01 09:39:42 (8968): Adding storage controller(s) to VM. 2025-05-01 09:39:42 (8968): Adding virtual disk drive to VM. (Theory_2025_04_17_prod.vdi) 2025-05-01 09:39:43 (8968): Adding VirtualBox Guest Additions to VM. 2025-05-01 09:39:43 (8968): Adding network bandwidth throttle group to VM. (Defaulting to 1024GB) 2025-05-01 09:39:43 (8968): forwarding host port 49787 to guest port 80 2025-05-01 09:39:43 (8968): Enabling remote desktop for VM. 2025-05-01 09:39:43 (8968): Required extension pack not installed, remote desktop not enabled. 2025-05-01 09:39:43 (8968): Enabling shared directory for VM. 2025-05-01 09:39:44 (8968): Starting VM using VBoxManage interface. (boinc_bf546202f0ebdc95, slot#8) 2025-05-01 09:39:44 (8968): Error in start VM for VM: 1 Command: VBoxManage -q startvm "boinc_bf546202f0ebdc95" --type headless Output: VBoxManage: error: The virtual machine 'boinc_bf546202f0ebdc95' has terminated unexpectedly during startup with exit code 1 (0x1) VBoxManage: error: Details: code NS_ERROR_FAILURE (0x80004005), component MachineWrap, interface IMachine Waiting for VM "boinc_bf546202f0ebdc95" to power on... 2025-05-01 09:39:44 (8968): VM failed to start. 2025-05-01 09:39:44 (8968): Could not start 2025-05-01 09:39:44 (8968): ERROR: VM failed to start 2025-05-01 09:39:44 (8968): Powering off VM. 2025-05-01 09:39:44 (8968): Deregistering VM. (boinc_bf546202f0ebdc95, slot#8) 2025-05-01 09:39:44 (8968): Removing network bandwidth throttle group from VM. 2025-05-01 09:39:44 (8968): Removing VM from VirtualBox. Hypervisor System Log: 00:00:00.001710 main VirtualBox XPCOM Server 6.1.32 r149290 darwin.amd64 (Jan 13 2022 20:13:15) release log 00:00:00.001714 main Log opened 2025-05-01T16:39:40.933731000Z 00:00:00.001714 main Build Type: release 00:00:00.001724 main OS Product: Darwin 00:00:00.001728 main OS Release: 24.4.0 00:00:00.001731 main OS Version: Darwin Kernel Version 24.4.0: Fri Apr 11 18:32:43 PDT 2025; root:xnu-11417.101.15~117/RELEASE_ARM64_T8103 00:00:00.001965 main Firmware type: failed - VERR_NOT_SUPPORTED 00:00:00.001975 main Host RAM: 16384MB (16.0GB) total, 1506MB available 00:00:00.002093 main Executable: /Applications/VirtualBox.app/Contents/MacOS/VBoxSVC 00:00:00.002093 main Process ID: 8990 00:00:00.002094 main Package type: DARWIN_64BITS_GENERIC 00:00:00.006909 main IPC socket path: /tmp/.vbox-boinc_project-ipc/ipcd VM Execution Log: VM Startup Log: VM Trace Log: VBoxManage: error: Context: "FindMachine(Bstr(VMNameOrUuid).raw(), machine.asOutParam())" at line 2733 of file VBoxManageInfo.cpp 2025-05-01 09:39:41 (8968): Command: VBoxManage -q createvm --name "boinc_bf546202f0ebdc95" --basefolder "/Library/Application Support/BOINC Data/slots/8" --ostype "Linux26_64" --register Exit Code: 0 Output: Virtual machine 'boinc_bf546202f0ebdc95' is created and registered. UUID: 6119fcf6-b016-4122-a5c3-69ced6ca5adf Settings file: '/Library/Application Support/BOINC Data/slots/8/boinc_bf546202f0ebdc95/boinc_bf546202f0ebdc95.vbox' 2025-05-01 09:39:41 (8968): Command: VBoxManage -q modifyvm "boinc_bf546202f0ebdc95" --description "Theory_2848-4599233-750_0" Exit Code: 0 Output: 2025-05-01 09:39:41 (8968): Command: VBoxManage -q modifyvm "boinc_bf546202f0ebdc95" --memory 630 Exit Code: 0 Output: 2025-05-01 09:39:41 (8968): Command: VBoxManage -q modifyvm "boinc_bf546202f0ebdc95" --cpus 1 Exit Code: 0 Output: 2025-05-01 09:39:41 (8968): Command: VBoxManage -q modifyvm "boinc_bf546202f0ebdc95" --acpi on --ioapic on --rtcuseutc on Exit Code: 0 Output: 2025-05-01 09:39:41 (8968): Command: VBoxManage -q modifyvm "boinc_bf546202f0ebdc95" --vram 16 --graphicscontroller VBoxVGA Exit Code: 0 Output: 2025-05-01 09:39:41 (8968): Command: VBoxManage -q modifyvm "boinc_bf546202f0ebdc95" --boot1 disk --boot2 dvd --boot3 none --boot4 none Exit Code: 0 Output: 2025-05-01 09:39:41 (8968): Command: VBoxManage -q showvminfo "boinc_bf546202f0ebdc95" --machinereadable Exit Code: 0 Output: name="boinc_bf546202f0ebdc95" groups="/" ostype="Linux 2.6 / 3.x / 4.x (64-bit)" UUID="6119fcf6-b016-4122-a5c3-69ced6ca5adf" CfgFile="/Library/Application Support/BOINC Data/slots/8/boinc_bf546202f0ebdc95/boinc_bf546202f0ebdc95.vbox" SnapFldr="/Library/Application Support/BOINC Data/slots/8/boinc_bf546202f0ebdc95/Snapshots" LogFldr="/Library/Application Support/BOINC Data/slots/8/boinc_bf546202f0ebdc95/Logs" hardwareuuid="6119fcf6-b016-4122-a5c3-69ced6ca5adf" memory=630 pagefusion="off" vram=16 cpuexecutioncap=100 hpet="off" cpu-profile="host" chipset="piix3" firmware="BIOS" cpus=1 pae="on" longmode="on" triplefaultreset="off" apic="on" x2apic="on" nested-hw-virt="off" cpuid-portability-level=0 bootmenu="messageandmenu" boot1="disk" boot2="dvd" boot3="none" boot4="none" acpi="on" ioapic="on" biosapic="apic" biossystemtimeoffset=0 rtcuseutc="on" hwvirtex="on" nestedpaging="on" largepages="on" vtxvpid="on" vtxux="on" paravirtprovider="default" effparavirtprovider="kvm" VMState="poweroff" VMStateChangeTime="2025-05-01T16:39:41.201000000" graphicscontroller="vboxvga" monitorcount=1 accelerate3d="off" accelerate2dvideo="off" teleporterenabled="off" teleporterport=0 teleporteraddress="" teleporterpassword="" tracing-enabled="off" tracing-allow-vm-access="off" tracing-config="" autostart-enabled="off" autostart-delay=0 defaultfrontend="" vmprocpriority="default" natnet1="nat" macaddress1="080027662B4E" cableconnected1="on" nic1="nat" nictype1="82540EM" nicspeed1="0" mtu="0" sockSnd="64" sockRcv="64" tcpWndSnd="64" tcpWndRcv="64" nic2="none" nic3="none" nic4="none" nic5="none" nic6="none" nic7="none" nic8="none" hidpointing="ps2mouse" hidkeyboard="ps2kbd" uart1="off" uart2="off" uart3="off" uart4="off" lpt1="off" lpt2="off" audio="coreaudio" audio_out="off" audio_in="off" clipboard="disabled" draganddrop="disabled" vrde="off" usb="off" ehci="off" xhci="off" videocap="off" videocapaudio="off" capturescreens="" capturefilename="/Library/Application Support/BOINC Data/slots/8/boinc_bf546202f0ebdc95/boinc_bf546202f0ebdc95.webm" captureres="1024x768" capturevideorate=512 capturevideofps=25 captureopts="" description="Theory_2848-4599233-750_0" GuestMemoryBalloon=0 2025-05-01 09:39:42 (8968): Command: VBoxManage -q modifyvm "boinc_bf546202f0ebdc95" --nic1 nat --nictype1 "virtio" --cableconnected1 off --natdnsproxy1 on Exit Code: 0 Output: 2025-05-01 09:39:42 (8968): Command: VBoxManage -q modifyvm "boinc_bf546202f0ebdc95" --cableconnected1 on Exit Code: 0 Output: 2025-05-01 09:39:42 (8968): Command: VBoxManage -q modifyvm "boinc_bf546202f0ebdc95" --usb off Exit Code: 0 Output: 2025-05-01 09:39:42 (8968): Command: VBoxManage -q modifyvm "boinc_bf546202f0ebdc95" --uart1 off --uart2 off Exit Code: 0 Output: 2025-05-01 09:39:42 (8968): Command: VBoxManage -q modifyvm "boinc_bf546202f0ebdc95" --audio none Exit Code: 0 Output: 2025-05-01 09:39:42 (8968): Command: VBoxManage -q modifyvm "boinc_bf546202f0ebdc95" --clipboard disabled Exit Code: 0 Output: 2025-05-01 09:39:42 (8968): Command: VBoxManage -q modifyvm "boinc_bf546202f0ebdc95" --draganddrop disabled Exit Code: 0 Output: 2025-05-01 09:39:42 (8968): Command: VBoxManage -q storagectl "boinc_bf546202f0ebdc95" --name "Hard Disk Controller" --add "sata" --controller "IntelAHCI" --hostiocache off --portcount 3 Exit Code: 0 Output: 2025-05-01 09:39:42 (8968): Command: VBoxManage -q showhdinfo "/Library/Application Support/BOINC Data/projects/lhcathome.cern.ch_lhcathome/Theory_2025_04_17_prod.vdi" Exit Code: 0 Output: UUID: b1b25507-41e2-4ead-9ca8-6f5e1c8e2ce4 Parent UUID: base State: created Type: normal (base) Location: /Library/Application Support/BOINC Data/projects/lhcathome.cern.ch_lhcathome/Theory_2025_04_17_prod.vdi Storage format: VDI Format variant: dynamic default Capacity: 10240 MBytes Size on disk: 2451 MBytes Encryption: disabled Property: AllocationBlockSize=1048576 2025-05-01 09:39:43 (8968): Command: VBoxManage -q storageattach "boinc_bf546202f0ebdc95" --storagectl "Hard Disk Controller" --port 0 --device 0 --type hdd --medium "/Library/Application Support/BOINC Data/projects/lhcathome.cern.ch_lhcathome/Theory_2025_04_17_prod.vdi" Exit Code: 0 Output: 2025-05-01 09:39:43 (8968): Command: VBoxManage -q storageattach "boinc_bf546202f0ebdc95" --storagectl "Hard Disk Controller" --port 0 --device 0 --type hdd --medium none Exit Code: 0 Output: 2025-05-01 09:39:43 (8968): Command: VBoxManage -q storageattach "boinc_bf546202f0ebdc95" --storagectl "Hard Disk Controller" --port 0 --device 0 --type hdd --mtype multiattach --medium "/Library/Application Support/BOINC Data/projects/lhcathome.cern.ch_lhcathome/Theory_2025_04_17_prod.vdi" Exit Code: 0 Output: 2025-05-01 09:39:43 (8968): Command: VBoxManage -q storageattach "boinc_bf546202f0ebdc95" --storagectl "Hard Disk Controller" --port 1 --device 0 --type dvddrive --medium "/Applications/VirtualBox.app/Contents/MacOS/VBoxGuestAdditions.iso" Exit Code: 0 Output: 2025-05-01 09:39:43 (8968): Command: VBoxManage -q bandwidthctl "boinc_bf546202f0ebdc95" add "boinc_bf546202f0ebdc95_net" --type network --limit 1024G Exit Code: 0 Output: 2025-05-01 09:39:43 (8968): Command: VBoxManage -q modifyvm "boinc_bf546202f0ebdc95" --natpf1 ",tcp,127.0.0.1,49787,,80" Exit Code: 0 Output: 2025-05-01 09:39:43 (8968): Command: VBoxManage -q list extpacks Exit Code: 0 Output: Extension Packs: 0 2025-05-01 09:39:44 (8968): Command: VBoxManage -q sharedfolder add "boinc_bf546202f0ebdc95" --name "shared" --hostpath "/Library/Application Support/BOINC Data/slots/8/shared" Exit Code: 0 Output: 2025-05-01 09:39:44 (8968): Command: VBoxManage -q startvm "boinc_bf546202f0ebdc95" --type headless Exit Code: 1 Output: VBoxManage: error: The virtual machine 'boinc_bf546202f0ebdc95' has terminated unexpectedly during startup with exit code 1 (0x1) VBoxManage: error: Details: code NS_ERROR_FAILURE (0x80004005), component MachineWrap, interface IMachine Waiting for VM "boinc_bf546202f0ebdc95" to power on... 2025-05-01 09:39:44 (8968): Command: VBoxManage -q snapshot "boinc_bf546202f0ebdc95" list Exit Code: 0 Output: This machine does not have any snapshots 2025-05-01 09:39:44 (8968): Command: VBoxManage -q bandwidthctl "boinc_bf546202f0ebdc95" remove "boinc_bf546202f0ebdc95_net" Exit Code: 0 Output: 2025-05-01 09:39:44 (8968): Command: VBoxManage -q unregistervm "boinc_bf546202f0ebdc95" --delete Exit Code: 0 Output: 0%...10%...20%...30%...40%...50%...60%...70%...80%...90%...100% 2025-05-01 09:39:49 (8968): called boinc_finish(1) </stderr_txt> ]]>
©2025 CERN