|
1)
Message boards :
Number crunching :
Not enough Disk space?
(Message 16000)
Posted 3 Jan 2007 by Ulrich Metzner Post: The only thing changed was, that i had set the project to no more work last year before christmas. I simply reenabled LHC to get new work and the error occured. I have absolutely no idea what to do... |
|
2)
Message boards :
Number crunching :
Not enough Disk space?
(Message 15996)
Posted 3 Jan 2007 by Ulrich Metzner Post: Ulrich Metzner, what's your total space on your disk? Maybe the "use no more than 80%" is the cause.The total size of the partition is 60 GB. |
|
3)
Message boards :
Number crunching :
Not enough Disk space?
(Message 15993)
Posted 3 Jan 2007 by Ulrich Metzner Post: I'm using BOINC client version 5.7.5. Here is the disk usage report: 
|
|
4)
Message boards :
Number crunching :
Not enough Disk space?
(Message 15984)
Posted 3 Jan 2007 by Ulrich Metzner Post: I get this message from the LHC server: 03.01.2007 13:16:13|lhcathome|Sending scheduler request: Requested by user 03.01.2007 13:16:13|lhcathome|Requesting 16492 seconds of new work 03.01.2007 13:16:17|lhcathome|Scheduler RPC succeeded [server version 502] 03.01.2007 13:16:17|lhcathome|Message from server: No work sent 03.01.2007 13:16:17|lhcathome|Message from server: (there was work but you don't have enough disk space allocated) 03.01.2007 13:16:17|lhcathome|Message from server: No disk space (YOU must free 1737.3 MB before BOINC gets space). Review preferences for maximum disk space used. 03.01.2007 13:16:17|lhcathome|Deferring scheduler requests for 1 days, 0 hours, 0 minutes and 0 seconds I have set this preferences: Disk and memory usage Use no more than 8 GB disk space Leave at least (Values smaller than 0.001 are ignored) 0.1 GB disk space free Use no more than 80% of total disk space Write to disk at most every 60 seconds Use no more than 75% of total virtual memory The free space on the disc is >21 GB and the only bigger thing is climate prediction with a usage of 2.44 GB. Now what is the problem here? |
|
5)
Message boards :
Number crunching :
Not enough disk space :(
(Message 12039)
Posted 15 Jan 2006 by Ulrich Metzner Post: Does not matter. Once it is full, it is full and you won't get work. If it is BOINC only, set the parms to use it all ... leave any free to 0 ... but, if you are running Einstein@Home or CPDN that is way too small ...For CPDN it's way too low but for Einstein, Seti and LHC it was always fine until now :/ And setting 'leave at least...' to 0 was absolutely false, cause it was interpreted as 100MB. So the guys at Einstein recommended setting it to 0.001 ;) Guess i'll have to try with 224 MB, but i really don't like to do that... [edit] It is far from full. There are ~120 MBytes free... |
|
6)
Message boards :
Number crunching :
Not enough disk space :(
(Message 12035)
Posted 15 Jan 2006 by Ulrich Metzner Post: Just a bit low if you ask me........ it's a 160 MByte RAM-disk ;) |
|
7)
Message boards :
Number crunching :
Not enough disk space :(
(Message 12000)
Posted 15 Jan 2006 by Ulrich Metzner Post: Sorry, but at Einstein this also was the first (wrong) answer (Einstein corrected it at their end!!, not mine!): My preferences are as follows since > 1 year !!! Do work while computer is running on batteries? (matters only for portable computers) no Do work while computer is in use? yes Do work only between the hours of (no restriction) Leave applications in memory while preempted? (suspended applications will consume swap space if 'yes') yes Switch between applications every (recommended: 60 minutes) 60 minutes On multiprocessors, use at most 1 processors Disk and memory usage Use no more than 0.16 GB disk space Leave at least 0.001 GB disk space free Use no more than 99% of total disk space Write to disk at most every 60 seconds Use no more than 75% of total virtual memory Network usage Connect to network about every (determines size of work cache; maximum 10 days) 1.5 days Confirm before connecting to Internet? (matters only if you use a modem) yes Disconnect when done? (matters only if you use a modem) no Maximum download rate: no limit Maximum upload rate: no limit Use network only between the hours of Enforced by versions 4.46 and greater (no restriction) Skip image file verification? Check this ONLY if your Internet provider modifies image files (UMTS does this, for example). Skipping verification reduces the security of BOINC. no So, what has changed and is the problem now? At Einstein it was their end, not mine!! [edit] If you don't believe me, here is the link: http://einstein.phys.uwm.edu/forum_thread.php?id=3239 |
|
8)
Message boards :
Number crunching :
Not enough disk space :(
(Message 11998)
Posted 15 Jan 2006 by Ulrich Metzner Post: Hi everyone, i have a little problem, i didn't had before: LHC@home - 2006-01-15 02:26:43 - Sending request to scheduler: http://lhcathome-sched1.cern.ch/scheduler/cgi LHC@home - 2006-01-15 02:26:46 - Scheduler RPC to http://lhcathome-sched1.cern.ch/scheduler/cgi succeeded LHC@home - 2006-01-15 02:26:46 - Message from server: No work sent (there was work but you don't have enough disk space allocated) Not enough disk space (only 22.7 MB free for BOINC). Review preferences for minimum disk free space allowed. LHC@home - 2006-01-15 02:26:46 - No work from project LHC@home - 2006-01-15 02:26:46 - Deferring communication with project for 1 days, 0 hours, 0 minutes, and 0 seconds I run BOINC on a 160 MB Ramdisk on a notebook, because of overheating from normal disk. This has been functional since > a year... Now, after the XMas outage it suddenly complains about not enough disk space :? There are ~120 MB of Ramdisk free??? So what is the problem??? |
|
9)
Message boards :
Number crunching :
WU send oddity
(Message 10391)
Posted 23 Sep 2005 by Ulrich Metzner Post: Just found other ones, that are waiting to get sent to other participants :/ http://lhcathome.cern.ch/workunit.php?wuid=620448 http://lhcathome.cern.ch/workunit.php?wuid=617530 http://lhcathome.cern.ch/workunit.php?wuid=562276 There is a raising trend in my pending credits... |
|
10)
Message boards :
Number crunching :
WU send oddity
(Message 10388)
Posted 22 Sep 2005 by Ulrich Metzner Post: Although you had a very nice discussion here, nonetheless this doesn't barely fit my question. Maybe LHC has another strategy in dispatching wu's to the clients, but this doesn't explain why especially this wu's are spread this way, where the major part of wu's are definitely NOT spread this way. Just take a look at your own result table. Normally wu's are spread out to different clients in a matter of minutes. Only if a result times out, another one is dispatched 'out of time'. So please stop this discussion and take a look at your own results and make a decent attendance. |
|
11)
Message boards :
Number crunching :
WU send oddity
(Message 10370)
Posted 22 Sep 2005 by Ulrich Metzner Post: Hi everyone, i have some strange WU's in my results table: http://lhcathome.cern.ch/workunit.php?wuid=603600 http://lhcathome.cern.ch/workunit.php?wuid=593592 Look at the Result IDs and i ask myself, why are [delete:n't] the others still NOT send? If they aren't send to anybody, it's no wonder i get no credit and they remain pending. Could someone involved take a look at that please? [edit] corrected double negation ;) |
|
12)
Message boards :
Number crunching :
Resigning due to short deadlines
(Message 9816)
Posted 1 Sep 2005 by Ulrich Metzner Post: Yes indeed, for multi project crunching this deadline is way too short. Just recently Einstein raised their deadline from 7 to 14 days. This step here is very counterproductive. Just my 0.02 € |
|
13)
Message boards :
Number crunching :
Where is everyone
(Message 8873)
Posted 24 Jul 2005 by Ulrich Metzner Post: I'm in Braunschweig / Germany, a high tech city, also known as 'Oker Valley' ;) |
|
14)
Message boards :
Number crunching :
Error Downloading...file not found on server.
(Message 8312)
Posted 5 Jul 2005 by Ulrich Metzner Post: Ther are still some left: 2005-07-05 14:28:27 [LHC@home] Giving up on download of wjun2A_v6s4hvpac_mqx__4__64.268_59.278__4_6__6__15_1_sixvf_boinc5512.zip: file was not found on server |
|
15)
Message boards :
Number crunching :
no work from project
(Message 7965)
Posted 5 Jun 2005 by Ulrich Metzner Post: > First off I'm using v4.44 on all my Computers, it has a lot of features I like > & sooner or later everybody's going to have to go to the new versions... > ... Not quite sure about that, cause for that, they have a very, very long and stoney way to go. As the client is right now it is like an usual pre alpha toy. It has many interesting, though absolute useless and unfunctional, options to play with, but none of them works somehow barely near to production quality. only my 0,02 € |
|
16)
Message boards :
Number crunching :
no work from project
(Message 7961)
Posted 4 Jun 2005 by Ulrich Metzner Post: > I've got 1 right now that just refuses to completely finish & upload even > though I've restarted it 4 times already, each time I restart it it resets to > 2:28 min to go and then when it gets done it just sits there doing nothing ... > What BOINC CC are you using? I still use the last useable BOINC CC 4.19 and have no problems here. |
|
17)
Message boards :
Number crunching :
Cannot find workunit
(Message 7768)
Posted 20 May 2005 by Ulrich Metzner Post: Me too, got two of them: The result is there, but if you click on workunit, it's not found :? Same with this one |
|
18)
Message boards :
Number crunching :
PHP-Errors on result pages - [SOLVED]
(Message 7741)
Posted 17 May 2005 by Ulrich Metzner Post: > Well, if you solved this, why not share the answer so if anyone else comes > across this again, they'll know what to do to get out of the situation next > time. > > ??? > I noticed the error and mentioned it in this board. After a while it was solved, sorry, don't know by whom or by itself, i edited only the thread title. |
|
19)
Message boards :
Number crunching :
PHP-Errors on result pages - [SOLVED]
(Message 7733)
Posted 16 May 2005 by Ulrich Metzner Post: Hello there, i get the following errors on the 'pending' and on the 'results' pages: Warning: mysql_fetch_object(): supplied argument is not a valid MySQL result resource in /shift/lxfsrk4101/data01/projects/lhcathome/html/user/results.php on line 45 Warning: mysql_free_result(): supplied argument is not a valid MySQL result resource in /shift/lxfsrk4101/data01/projects/lhcathome/html/user/results.php on line 49 |
|
20)
Message boards :
Number crunching :
ADMIN! - Project Down Errors & Message Board Errors
(Message 7494)
Posted 7 May 2005 by Ulrich Metzner Post: > Ulich, great Avatar Picture :-) ! > Thanks, it's mainly from the german Firefox-board (Gecko-Engine) but i like it so much, i now use it for all my accounts ;) |
Next 20
©2024 CERN