Questions and Answers :
Windows :
How to achieve a PC with 100% CPU/GPU performance simultaneously 24 hours/7 days in Windows 10/11 with 100% Intel load.
Message board moderation
Author | Message |
---|---|
![]() Send message Joined: 9 Feb 09 Posts: 25 Credit: 2,785,379 RAC: 7,052 ![]() ![]() |
It won't let me write content for the post guide. I don't know the reasons. |
![]() Send message Joined: 9 Feb 09 Posts: 25 Credit: 2,785,379 RAC: 7,052 ![]() ![]() |
How to achieve a PC with 100% CPU/GPU performance simultaneously 24 hours/7 days in Win 10/11 with 100% load. -------------------------------------------------- -------------------- (Step 1) Information about your CPU GPU I5 12600 3300 mhz thread 65wTDP/113w 100t juction tuf gaming RTX2600 TU106-200A 175wTDP 6cpu/12 threads work In this case we must assimilate that we have 12 threads / we will always leave 1 CPU / 2 threads free of computing for the operating system / GPU use. Target CPU temperature 60º to 75º in all cores 100% load/ 140W GPU core (72º) 100% load. 3 Route 1) Route 1. Leaving everything without touching the bios or software, from the factory everything comes overclocked (not 24h/7days). 2) Route 2. Simple without overclocking (full safe mode), leave the CPU at base frequency (3300 MHz), still put a tdp (65w in my case). --- Software---- Coretemp,(options)(overheat protection)=enabled 85º /shutdown Options/Power Down 30 seconds,OK. It allows you to monitor each core CPU or the entire heat of all cores CPU including the workload on the cores. Asus GPUtweak/Lower power=100% to 80% Target temperature=70º,create profile,memorize profile,Config/General/Start with Windows. Asus GPUTweak is CONTROL POWER GPU to LOWER or UP POWER. MSI Kombustor is tress test 100% load to CPU/GPU.LOAD DONT OVERCLOCK (Nvidi Control Panel) (Control 3D Settings) Low latency mode=Choose ULtra Power Control Mode =Choose Maximum preferred performance. 3) Route 3. Overclocking on CPU under control up to 65W (TDP) (on my CPU, on yours it will be different), this will work better or worse depending on your CPU heatsink. GPU lower power performance. ----Software----- (The same Software as Route2 is applied) -------------------------------------------------- ---- |
![]() Send message Joined: 9 Feb 09 Posts: 25 Credit: 2,785,379 RAC: 7,052 ![]() ![]() |
(Step 2) Route2,3) (Bios) Enter bios (F2/Delete) -------------------------- XMPs=OFF Inte rapid Storage technology=OFF FANS=Manual Fan1 CPU 1point 40º30% 2point60º80% 3point70º 100% -----Manual Fan2 1 point 20º 30% 2point35º 50% 3 point 40º 80% -----Manual Fan3 choose your way (F7) (AITWEAKERs) Inte Baseline Profile=yes choose and enter or click (update Bios Baseline) AI Overclocker tuner=AUTO ASU Multicore Enhacement 2 options 1) with bios update and Inte Baseline Profile= Choose Disabled Enforcer ALL LIMITS ------------------------------------2) Without bios update and without Inte Baseline Profile =Choose Auto lets bios Optimizer SVID Behavior=Inte Fail Safe Performance Core Ratio=Choose Sync all cores ----------------------------------------- Rest Options panel Choose "AUTO" -------------------------------------------------- ------------------ (Internal CPU Power management) Long Duration Package Power Limit="enter number"65 on my cpu is 65w TDP "Choose your CPU" Package Power time window= "enter number" 1 s (by default it is 30 seconds) but giving it a smaller window will never exceed the maximum TDP for a time greater than 1 second. It is more stable for longer at the same frequency (overclocking) Short Duration Package Power Limit=The same TDP that you previously set in Long Duration Package Power Limit for your CPU, in my case 65W. Dual TAU Boost=OFF IA TDC CURRENT LIMIT INTE =Default THE IMPORTANT SECTION HERE (LONG DURATION PACKAGE POWER LIMIT/SHORT DURATION PACKAGE POWER LIMIT) limits the maximum amount of watts that the CPU will use in state P1 and P2. If you noticed in this case both P1 (65w), P2 (65W) with a window time of 1 second, the processor in no case exceeds 65w. This forces the CPU to go to very high frequencies with hardly any workload for the 6 cores/12 threads (4400 mhz in my case). When there is a 100% workload for all cores (6cores/12threads), in my case, the same CPU will lower the frequency to all cores equally to stay in line. 65w(3900mhz) IF YOU SEE THAT AT 100% LOAD in all the Cores of your CPU you still have temperatures equal to greater than =^75 degrees, lower more watts, it could be that you have a basic CPU heatsink. |
![]() Send message Joined: 9 Feb 09 Posts: 25 Credit: 2,785,379 RAC: 7,052 ![]() ![]() |
step 3 https://ibb.co/TvV8Y2Z |
©2025 CERN