Joined: 26 Dec 11
This is the SLAC Laboratory Underground Dark Matter Detector production video:
There are one supposes several question to answer & to ask..
1: The mesh is metal under tension & obviously several factors come into play:
1a: Metal & chemical interactions
Metal composition; What is the formula of the metal grid compound or material?
Are the materials entirely magnetic?
If so how do they receive protection from magnetic fields and vibrations?
What level of power Volt, AMP,Watt is used?
What are the Oms potential of the wires & combined together the total?
What is the noise level of the parts and the total body of the unit?
Are radio waves produced ? & if so do they or other frequencies reproduced in the device ..
get calculated out or cancelled or abstracted in the HPC node computation..?
1b: Fluid within the chamber is pure? or purified in a vacuum to remove bubbles?
Are fluid impurities tested ?
1c: What is the lifetime of the unit?
1d: Is the unit repaired & are error potentials examined?
2: Have the team examined all potential production & lab environments within budget to provide:
2a: Quality of production.
3: during production is the fluid at a specific pressure?
3b: Is the fluid pressure measured during the experiment & if so the frequency of measurements.
4: Does the device include monitoring for sound ? or a mic, Pickup
5: Are all the combined parts examined in the testing phase for noise, Electrical or energy emissions..
6: What is the decay cycle (all versions)
7: Pure element interactions & chemical formula variance during life cycle:
7c: in environment..
7d: under load.