Posts by Thomas

1) Questions and Answers : Windows : CPU does not have hardware virtualization support (Message 48729) Posted 2 Oct 2023 by Thomas Post: Yes, Teams typically starts on boot and runs in the background as a default. I've turned that off. Its also not running in task manager. But as I was saying, that would only pause WU's, not prevent them from downloading. It would also pause all WU's for all projects, and all other projects work fine. I also set it to "run always" so that and other preferences are ignored anyway. So its not the Teams rule.
2) Questions and Answers : Windows : CPU does not have hardware virtualization support (Message 48721) Posted 2 Oct 2023 by Thomas Post: Teams is Microsoft Teams. It's like Skype/Zoom. It does not run at boot and does not run in the background. Besides, that would stop WU's from processing, not prevent WUs from being downloaded. Nor does it explain the "CPU does not have hardware virtualization support" notation. It's something else and I have no idea what.
3) Questions and Answers : Windows : CPU does not have hardware virtualization support (Message 48720) Posted 2 Oct 2023 by Thomas Post: SVM is enabled in BIOS. Also, VM does work, and CPU-V gives me two green checks. As for Teams, its installed, but it's not running. If I did, it simply wouldn't run any WU, and other WU's work fine. LHC is the only problem.
4) Questions and Answers : Windows : CPU does not have hardware virtualization support (Message 48716) Posted 1 Oct 2023 by Thomas Post: Before you say anything, yes, I know this has been posted a thousand times. But I recently built a new computer and upgraded to Windows 11. I have gone through the checklist, numerous times, and I'm quite frustrated and getting to the point of giving up. Hyper -V and anything else VM related in windows is off and uninstalled. Core isolation is off. No WSL's. SVM is enabled in BIOS. CPU-V gives me two green checks. Virtubox appears to work. Computer hardware is current. https://lhcathome.cern.ch/lhcathome/show_host_detail.php?hostid=10553062 Yet, it says "CPU does not have hardware virtualization support". Event log simply states "No Tasks Sent". The computer page also says it completed a task, but it never has, and the date is wrong. Startup event log is: 10/1/2023 2:13:08 PM \| \| log flags: file_xfer, sched_ops, task, cpu_sched, cpu_sched_status 10/1/2023 2:13:08 PM \| \| Libraries: libcurl/8.2.1-DEV Schannel zlib/1.2.13 10/1/2023 2:13:08 PM \| \| Data directory: E:\BOINC 10/1/2023 2:13:08 PM \| \| Running under account Thomas 10/1/2023 2:13:09 PM \| \| CUDA: NVIDIA GPU 0: NVIDIA GeForce GTX 1060 6GB (driver version 536.99, CUDA version 12.2, compute capability 6.1, 6144MB, 6144MB available, 4698 GFLOPS peak) 10/1/2023 2:13:09 PM \| \| OpenCL: NVIDIA GPU 0: NVIDIA GeForce GTX 1060 6GB (driver version 536.99, device version OpenCL 3.0 CUDA, 6144MB, 6144MB available, 4698 GFLOPS peak) 10/1/2023 2:13:09 PM \| \| Windows processor group 0: 16 processors 10/1/2023 2:13:09 PM \| \| Host name: Tom7700X 10/1/2023 2:13:09 PM \| \| Processor: 16 AuthenticAMD AMD Ryzen 7 7700X 8-Core Processor [Family 25 Model 97 Stepping 2] 10/1/2023 2:13:09 PM \| \| Processor features: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 htt pni ssse3 fma cx16 sse4_1 sse4_2 movebe popcnt aes f16c rdrandsyscall nx lm avx avx2 sse4a osvw wdt topx page1gb rdtscp fsgsbase bmi1 smep bmi2 10/1/2023 2:13:09 PM \| \| OS: Microsoft Windows 11: Professional x64 Edition, (10.00.22621.00) 10/1/2023 2:13:09 PM \| \| Memory: 63.74 GB physical, 67.74 GB virtual 10/1/2023 2:13:09 PM \| \| Disk: 2.73 TB total, 1.74 TB free 10/1/2023 2:13:09 PM \| \| Local time is UTC -4 hours 10/1/2023 2:13:09 PM \| \| No WSL found. 10/1/2023 2:13:09 PM \| \| VirtualBox version: 7.0.10 10/1/2023 2:13:09 PM \| \| Config: don't compute while Teams.exe is running 10/1/2023 2:13:09 PM \| \| Config: use all coprocessors 10/1/2023 2:13:09 PM \| LHC@home \| General prefs: from LHC@home (last modified 30-Sep-2023 13:19:32) 10/1/2023 2:13:09 PM \| LHC@home \| Computer location: home 10/1/2023 2:13:09 PM \| \| General prefs: using separate prefs for home 10/1/2023 2:13:09 PM \| \| Reading preferences override file 10/1/2023 2:13:10 PM \| \| Preferences: 10/1/2023 2:13:10 PM \| \| - When computer is in use 10/1/2023 2:13:10 PM \| \| - 'In use' means mouse/keyboard input in last 5.00 minutes 10/1/2023 2:13:10 PM \| \| - don't compute 10/1/2023 2:13:10 PM \| \| - don't use GPU 10/1/2023 2:13:10 PM \| \| - max CPUs used: 16 10/1/2023 2:13:10 PM \| \| - Use at most 100% of the CPU time 10/1/2023 2:13:10 PM \| \| - suspend if non-BOINC CPU load exceeds 25% 10/1/2023 2:13:10 PM \| \| - max memory usage: 31.87 GB 10/1/2023 2:13:10 PM \| \| - When computer is not in use 10/1/2023 2:13:10 PM \| \| - max CPUs used: 16 10/1/2023 2:13:10 PM \| \| - Use at most 100% of the CPU time 10/1/2023 2:13:10 PM \| \| - suspend if non-BOINC CPU load exceeds 25% 10/1/2023 2:13:10 PM \| \| - max memory usage: 57.36 GB 10/1/2023 2:13:10 PM \| \| - Suspend if running on batteries 10/1/2023 2:13:10 PM \| \| - Store at least 0.10 days of work 10/1/2023 2:13:10 PM \| \| - Store up to an additional 0.50 days of work 10/1/2023 2:13:10 PM \| \| - max disk usage: 100.00 GB 10/1/2023 2:13:10 PM \| \| - (to change preferences, visit a project web site or select Preferences in the Manager) LHC seems to have combined my pre-build rig (Win10 FX8350) with my new rig. Can they be unmerged? Any idea what's going on here in general? Would this update on the LHC page if I did get it right, or do I need to start over? Thanks!
5) Message boards : ATLAS application : Probing /cvmfs/atlas.cern.ch... Failed! (Message 48014) Posted 14 Apr 2023 by Thomas Post: That worked. # Must be set: the repositories required for ATLAS/Theory # If "CVMFS_DEFAULT_DOMAIN" is set to "cern.ch" like in /etc/cvmfs/default.d/50-cern.conf # simple names will expand to FQRNs, # e.g. atlas -> atlas.cern.ch CVMFS_REPOSITORIES="atlas,atlas-condb,grid,cernvm-prod,sft,alice" # Must be set: to ensure openhtc.io will be used CVMFS_USE_CDN=yes # If a local proxy <my_proxy> is available that listens at port <proxy_port>. # Replace <my_proxy> with either: # - the computer name of your local proxy; requires a well configured local name resolution # - the FQDN of your local proxy; requires a well configured local name resolution # - the IP of your local proxy # Replace <proxy_port> with your proxy's TCP port; Squid's default would be 3128 # Pattern: CVMFS_HTTP_PROXY="http://<my_proxy>:<proxy_port>;DIRECT" # Example: CVMFS_HTTP_PROXY="http://squid:3128;DIRECT" # Only recommended for clusters <5 worker nodes: # uncomment the next line if no local proxy is available. # CVMFS_HTTP_PROXY="auto;DIRECT" # further options CVMFS_KCACHE_TIMEOUT=2 CVMFS_MAX_RETRIES=3
6) Message boards : ATLAS application : Probing /cvmfs/atlas.cern.ch... Failed! (Message 48013) Posted 14 Apr 2023 by Thomas Post: I thought I did before, but now nothing happens.
7) Message boards : ATLAS application : Probing /cvmfs/atlas.cern.ch... Failed! (Message 48011) Posted 14 Apr 2023 by Thomas Post: $ sudo cvmfs_config showconfig -s atlas.cern.ch systemctl status autofs.service CVMFS_REPOSITORY_NAME=atlas.cern.ch CVMFS_BACKOFF_INIT=2 # from /etc/cvmfs/default.conf CVMFS_BACKOFF_MAX=10 # from /etc/cvmfs/default.conf CVMFS_BASE_ENV=1 # from /etc/cvmfs/default.conf CVMFS_CACHE_BASE=/var/lib/cvmfs # from /etc/cvmfs/default.conf CVMFS_CACHE_DIR=/var/lib/cvmfs/shared CVMFS_CHECK_PERMISSIONS=yes # from /etc/cvmfs/default.conf CVMFS_CLAIM_OWNERSHIP=yes # from /etc/cvmfs/default.conf CVMFS_CLIENT_PROFILE= # from /etc/cvmfs/default.conf CVMFS_CONFIG_REPO_DEFAULT_ENV=1 # from /cvmfs/cvmfs-config.cern.ch/etc/cvmfs/default.conf CVMFS_CONFIG_REPOSITORY=cvmfs-config.cern.ch # from /etc/cvmfs/default.d/50-cern-debian.conf CVMFS_DEFAULT_DOMAIN=cern.ch # from /etc/cvmfs/default.d/50-cern-debian.conf CVMFS_FALLBACK_PROXY= # from /cvmfs/cvmfs-config.cern.ch/etc/cvmfs/domain.d/cern.ch.conf CVMFS_HIDE_MAGIC_XATTRS=yes # from /cvmfs/cvmfs-config.cern.ch/etc/cvmfs/default.conf CVMFS_HOST_RESET_AFTER=1800 # from /etc/cvmfs/default.conf CVMFS_HTTP_PROXY= # from /cvmfs/cvmfs-config.cern.ch/etc/cvmfs/domain.d/cern.ch.conf CVMFS_KEYS_DIR=/cvmfs/cvmfs-config.cern.ch/etc/cvmfs/keys/cern.ch # from /etc/cvmfs/domain.d/cern.ch.conf CVMFS_LOW_SPEED_LIMIT=1024 # from /etc/cvmfs/default.conf CVMFS_MAGIC_XATTRS_VISIBILITY=rootonly # from /cvmfs/cvmfs-config.cern.ch/etc/cvmfs/default.conf CVMFS_MAX_RETRIES=1 # from /etc/cvmfs/default.conf CVMFS_MOUNT_DIR=/cvmfs # from /etc/cvmfs/default.conf CVMFS_NFILES=131072 # from /etc/cvmfs/default.conf CVMFS_PAC_URLS='http://grid-wpad/wpad.dat;http://wpad/wpad.dat;http://cernvm-wpad.cern.ch/wpad.dat;http://cernvm-wpad.fnal.gov/wpad.dat' # from /cvmfs/cvmfs-config.cern.ch/etc/cvmfs/default.conf CVMFS_PROXY_RESET_AFTER=300 # from /etc/cvmfs/default.conf CVMFS_QUOTA_LIMIT=4000 # from /etc/cvmfs/default.conf CVMFS_RELOAD_SOCKETS=/var/run/cvmfs # from /etc/cvmfs/default.conf CVMFS_SEND_INFO_HEADER=yes # from /cvmfs/cvmfs-config.cern.ch/etc/cvmfs/domain.d/cern.ch.conf CVMFS_SERVER_URL='http://cvmfs-stratum-one.cern.ch:8000/cvmfs/atlas.cern.ch;http://cernvmfs.gridpp.rl.ac.uk:8000/cvmfs/atlas.cern.ch;http://cvmfs-s1bnl.opensciencegrid.org:8000/cvmfs/atlas.cern.ch;http://cvmfs-s1fnal.opensciencegrid.org:8000/cvmfs/atlas.cern.ch;http://cvmfsrep.grid.sinica.edu.tw:8000/cvmfs/atlas.cern.ch;http://cvmfs-stratum-one.ihep.ac.cn:8000/cvmfs/atlas.cern.ch;http://cvmfs-s1.hpc.swin.edu.au:8000/cvmfs/atlas.cern.ch' # from /etc/cvmfs/domain.d/cern.ch.conf CVMFS_SHARED_CACHE=yes # from /etc/cvmfs/default.conf CVMFS_STRICT_MOUNT=no # from /etc/cvmfs/default.conf CVMFS_TIMEOUT=5 # from /etc/cvmfs/default.conf CVMFS_TIMEOUT_DIRECT=10 # from /etc/cvmfs/default.conf CVMFS_USE_GEOAPI=yes # from /etc/cvmfs/domain.d/cern.ch.conf CVMFS_USER=cvmfs # from /etc/cvmfs/default.conf
8) Message boards : ATLAS application : Probing /cvmfs/atlas.cern.ch... Failed! (Message 48009) Posted 14 Apr 2023 by Thomas Post: No, same results when I run it.
9) Message boards : ATLAS application : Probing /cvmfs/atlas.cern.ch... Failed! (Message 48004) Posted 14 Apr 2023 by Thomas Post: Atlas WU failed after about 10 minutes with the following error. <core_client_version>7.18.1</core_client_version> <![CDATA[ <message> process exited with code 195 (0xc3, -61)</message> <stderr_txt> 22:30:59 (268507): wrapper (7.7.26015): starting 22:30:59 (268507): wrapper: running run_atlas (--nthreads 6) [2023-04-13 22:30:59] Arguments: --nthreads 6 [2023-04-13 22:30:59] Threads: 6 [2023-04-13 22:30:59] Checking for CVMFS [2023-04-13 22:31:01] Probing /cvmfs/atlas.cern.ch... Failed! [2023-04-13 22:31:01] Probing /cvmfs/atlas-condb.cern.ch... Failed! [2023-04-13 22:31:01] cvmfs_config probe atlas.cern.ch atlas-condb.cern.ch failed, aborting the job 22:41:01 (268507): run_atlas exited; CPU time 0.076063 22:41:01 (268507): app exit status: 0x1 22:41:01 (268507): called boinc_finish(195) </stderr_txt> ]]> I did run sudo cvmfs_config chksetup before starting with a return of "OK" so I thought I was good. Any idea what I'm missing? Running Linux Ubuntu 22.04.2 LTS [5.19.0-32-generic\|libc 2.35] with VB 7.0.6-155176
10) Message boards : Number crunching : SUDDEN LOSS OF TASKS (Message 46869) Posted 11 Jun 2022 by Thomas Post: Sorry, I'm not following. I didn't think 6.0.14 was that old. Is 6.1.12 going to make that much of a difference? I'm also fine with any work you have for us. Still getting nothing, and no message why. Just "No Tasks Sent". Has my computer been blackballed or something? Kind of stumped, and I'm back on a Windows platform, so I can't run my normal project. Would like to be able to do some work.
11) Message boards : Number crunching : SUDDEN LOSS OF TASKS (Message 46824) Posted 26 May 2022 by Thomas Post: Got the same problem. I both reset and detached from the project. Neither worked. Obviously a delay of 6 seconds is not right either. Kind of at a loss here.

LHC@home